Question about 2003 Chrysler Town & Country

2 Answers

Fuel pump stopped working fuse is good what else could it be

Posted by on


2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that gotĀ 5 achievements.


    Visited the website for 3 consecutive days.


    An expert who has answered 20 questions.

  • Expert
  • 62 Answers

You need to use a noid light on one of the fuel injector plug if no pulse your ECM is shot.if you need a reman.ecm you can get them on ebay,they come programed plug and play.

Posted on Oct 24, 2015

  • Level 1:

    An expert who has achieved level 1.


    An expert that hasĀ over 10 points.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 7 Answers

Are you sure the pump isn't working? Open the gas cap and place your ear close to the opening and have someone turn the key to start position and see if you can hear the pump start running. If it runs, then pull the fuel filter and check to make sure you can easily blow through it. If not, replace filter and try to start vehicle. If you find the pump is not running at all then check to see if your vehicle has a "fuel pump relay". This may be bad. This is easy to check, because many relays in your relay have the same pin configuration as the fuel pump relay. Just pull the fuel pump relay and then start pulling other relays until you find a match and plug it into the fuel pump slot. If all these won't get the pump to run then you probably need a new pump.

Posted on Dec 12, 2014


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Vehicle motor turns but not fuel supply

You don't say if you have checked that the Fuel Pump is working.

1. You need to check that the fuel pump is operating and getting power.. Have someone turn on the ignition (but not start the engine) If you listen near the FP location you should hear the fuel pump run for 3 seconds and stop. If in doubt do this a couple of times until you can hear the pump run and stop.

2. If you cannot hear the pump running check the fuel system related fuses.

3. If the fuses are good check that the relay for the fuel pump you replaced is functioning. Have someone turn the ignition on and off a few times and listen for the click from the relay or put your finger on it.

4. As a final check have a simple fuel pressure test done on the fuel system if not done already. . If everything is running normally and you are getting good fuel pressure then the starting problem will be somewhere else.

Dec 27, 2015 | 2002 Mitsubishi Colt

1 Answer

Fuel pump stop working. I replaced fuel pressure regulator, fuel pump relay, and fuel pump. Still nothing working hook the fuel pump to car battery then fuel pump started pumping car still won't crank

Hi, If the car is not cranking, you should start at the battery. #1, is the battery good? Do you have good batt conn? GROUND TOO. Next go to your fuse box. It sounds like your fighting with a bad battery or ground. Stay in touch. PS Am If I'm understanding what your saying, the motor is not cranking too, right? If so I stand by my answer

Nov 09, 2015 | Cars & Trucks

1 Answer

How do I check fuel pump fuse on 1989 gmcs15

The fuel pump relay gets power from the ECM fuse which also powers the computer. So if the check engine light does not come on when you turn the key on, it could be the fuse. But it could also be the pump relay.

Aug 17, 2012 | GMC Cars & Trucks

2 Answers

First front fuel pump stopped working then next rear fuel pump stopped working pumps both work tried relays that didnt work fuses checked as well so now what

Check the engine to body ground strap. Top rear of engine screwed to firewalll. Or ground the tank to the frame.? Good luck

Nov 18, 2009 | 1990 Ford F150

2 Answers

My gas gauge does not work?

If you're fuel gauge stopped working, this would not affect the fuel pump or pump relay. More then likely, the sending unit is at fault. You may check fuses to see if this vehicle has a fuse for the gauge. some do. The fuel pump has a relay under hood and also a 30 amp fuse.Has separate circuits for gauges.I would be looking at the sending unit.
Good Luck, Sinserely, shastalaker7

Oct 30, 2009 | 1995 Subaru Legacy

1 Answer

Fuel pump problems

you have a shut off button in the trunk find it turn it off and turn it back on

Apr 30, 2009 | Mercury Grand Marquis Cars & Trucks

2 Answers

Need wiring diagram for 2001 kia sportage , need it for fuel pump

2002 kia optima has no fire to the spark plugs
or spark plug connector

Jan 20, 2009 | Kia Sportage LX Cars & Trucks

Not finding what you are looking for?
2003 Chrysler Town & Country Logo

218 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chrysler Experts


Level 3 Expert

76682 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8531 Answers

Are you a Chrysler Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides