Question about Cars & Trucks
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
SOURCE: Fuel Pump 2000 Ford Mustang
remove it from what? You should have dropped the gas tank - it's removed from the tank after it's lowered from the car. Two straps, the filler neck (which is a little tricky - make sure the tank is supported by a jack).
Posted on Jun 14, 2008
SOURCE: Fuel Pump - 2000 Ford Mustang
the best place to get any answer for a mustang is here: and I hope I don't get booted off this site for it - but it really has any answer you're looking for - 3.8mustang.com
Posted on Jun 16, 2008
How do you know the fuel pump is not getting power?.The fuel pump only comes on for a second or two before cutting back off.The ecm only suppys power to the relay for a few short seconds with key in the on position.Only constant 12 volts is supplied when the engine is running.Is the fuel pump new?How do we know it is good?Also is the engine giving a spark when the engine is turning over?If the engine has no spark,then the pick up coil could be bad,otr the ignition module could be bad.Check the fuel at the injsctors or a fuel line to see if the fuel will pump out when the key is turned on,if it does not,then check to see if the ijectors are pulsing.If the injectors are not pulsing ,and you have spark,then remove the distributor and replace the pick up coil,and the ignition module.The pick up coil,along with the igniyion module give the injectors there pulse.One other thing,If the fuel pump is not for sure coming on,check to see if the relay is clicking on,and then off in a couple of seconds.If this is true,then replace the fuel pump.Any other questons,please ask,I will try to help if I can.I hope this was some help,let me know,thanks.
Posted on Oct 01, 2009
Testimonial: "The car runs so I know it's getting spark and the car stays running with no problem fuel pump putting correct psi but it wrks when I put power 2 it"
SOURCE: bypass fuel pump ford f150
There are four terminals on the relay. One is power, one is the pump circuit, the other two are for the magnet that closes the contacts.
You jumper a wire between the power and pump terminals in the box.
The relay is marked with a diagram and the pins on the relay are numbered.
Posted on Aug 13, 2012
Tips for a great answer:
Dec 12, 2014 | Cars & Trucks
Dec 12, 2014 | Cars & Trucks
Apr 01, 2011 | 1998 Ford Mustang
Nov 29, 2010 | 1992 Ford Mustang
Sep 23, 2010 | 1994 Ford Mustang
Jul 16, 2010 | 1995 Ford Mustang
Apr 24, 2010 | 1996 Ford Mustang
Sep 30, 2009 | 1991 Ford Mustang
36 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: