Question about 2003 Ford Crown Victoria

1 Answer

My 2003 crown vic is making a loud noise from the top of the motor towards the back drivers side i have already changed the exhaust manifold gasket on that side

Changed the exhaust manifold gasket on the left side

Posted by on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 37 Answers

You changed the exhaust manifold gasket. Did you take a look at the exhaust pipe, the end connections into the exhaust manifold, and the connections into the catalytic converter? There could be a small hole that that is large enough for the sound to be heard. If you don't know what to look for, have a mechanic look over the entire exhaust system for you. You may be surprised at what they may find.

Posted on Dec 13, 2014

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Sorry, I inadvertently hit ask button. CEL not working,bulb replaced with new on a 2003 KIA Sorento,3.5v6,4x4.


You need a shop with a really savvy tech to look into this, just to many faults at once, not sure what is going on here and have been doing this for 30 years now.

Nov 09, 2016 | 2003 Kia Sorento

1 Answer

2003 chevy cavalier, up around the manifold is making a loud can you help me?


check real close, it is either a cracked manifold. or the manifold gasket are bad. while running engine put hand around manifold, but do not touch it or you will get burnt. this way if it is leaking, you will feel the exhaust coming out. Hope this helps, Good-Day!

Jun 06, 2014 | 2003 Chevrolet Cavalier

1 Answer

Loud nocking noise


we had this problem with a crown vic,we thought it was a rod knock but it was a cat converter that was going bad

Dec 05, 2012 | 1997 Ford Crown Victoria

1 Answer

Need a diagram showing how to change spark plugs in my 2003 Crown Vic


look at the sides of the motor might be hidden if not there might be on the top of the motor under a plastic cover

Mar 26, 2012 | 2003 Ford Crown Victoria

1 Answer

My 2006 Kia Optima is making a clicking sound. It has been doing this for over 6k miles now, so I don't think it's that bad. I drive fast and hard, but has not gotten worse. Help??????


I assume we are talking about a motor noise. A lot of people assume a clicking sound is a valve noise. Most of the time a loud clicking noise is actually a bad exhaust gasket. An air leak on an automotive exhaust manifold sounds like a loud tick or click. Try changing the gaskets on both sides of the exhaust manifold . This should take care of the clicking.

Nov 05, 2010 | 2005 Saturn VUE

1 Answer

Donut gasket is bad what does that mean on a 1990 crown vic


It means you have an exhaust leak between the exhaust manifold and the downpipe.

Jul 06, 2010 | 1990 Ford LTD Crown Victoria

1 Answer

Exaught manafold leak


You state that car makes a loud noise when driving. Do you notice the sound more when you accelerate? If yes, then it could be either the exhaust manifold gasket or the donut gasket. The donut gasket is where the exhaust pipe connects to the exhaust manifold.

Jun 24, 2010 | 2000 Ford Focus

2 Answers

Loud Clacking Noise


timeing has slipped or cam broken

Aug 24, 2009 | 2003 Ford Crown Victoria

2 Answers

2003 d22 3.0lt td nissan navara. Pushing air out intake


did it make a loud whistling noise went it started 2 boost up

Jul 30, 2009 | 2003 Nissan Pathfinder

2 Answers

Crown victoria window motor replacement


remove the door panel. be very careful and make sure you get all the screws out. Should be maybe 2 on the bottom half of the door, and 2 on the top half. one is right by the handle, which is the one i forgot the first time i took my door pannel off. carefully pull the panel upward, and outward at the same time. Once the panel is off, disconnect the controls, and remove the light from the panel. Remove the plastic cover very carefully, it will tear, just keeps noise, and air, and the elements out.
There will be 3 screws, they are torx bolts, once you pull those 3 out. They are located middle of the door towards the right side. The motor will drop down a little bit. disconnect the wires for the motor, and wiggle the motor off of the regulator. the crown vics have a decent size hole to get into the door panel, you can also remove the speaker if that would help you do it. other than that, it just lining up the new motor into the car, pushing it into the regulator, and putting the 3 bolts in, make sure they are snug, and not cross threaded. put everything back together, and your set.

Jul 21, 2008 | 2003 Ford Crown Victoria

Not finding what you are looking for?
2003 Ford Crown Victoria Logo

109 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

76848 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

fordexpert

Level 3 Expert

5546 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...