Question about 2005 Hyundai Tucson

1 Answer

How do I replace the blend door?

Can locate where it's at. Wondering if it's something I can do myself or am I better off letting a professional do it?

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 6 Answers

The blend door is located right over the cabin air filter. If you cycle the selector control from max ac to outside air you can fee/see it moving (after you drop the glove box door).
The door is parallel to the glove box, and you should be able to see it opening and closing, it should close securely in both positions. Try adjusting the temperature selector knob to see if the door opens part way.
I believe that to change/repair the door you need to remove the heater box (MAJOR JOB involving removing both front seats and the entire dash crash pad, it will probably be a 8 to 10 hour job, because you have to drain the cooling system and disconnect the a/c lines and the heater hoses.
Sorry, but there is no easy way to do it (take it to a dealer unless you are really handy and have all the tools etc).

Posted on Dec 12, 2014

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

My windstar is a 99 it has no heat and you can hear a clicking sound under the center console. any ideas.


Temp . blend door actuator . The clicking is the stripped plastic gears in side the actuator . The actuator is a electric motor that controls the temp. blend door . Could be a video on youtube on replacing it .

Nov 20, 2016 | 1999 Ford Windstar

1 Answer

How to remove a blend actuator in a 1999 corvette


The blend door actuator is located on drivers of car above the gas pedal and held down with 2 or 3 5.5 mm screws good luck in a tight area.

May 09, 2014 | 1999 Chevrolet Corvette

2 Answers

How do I get to the rear blend door in my 2004 Durango?


Hi Denny, The blend flaps are usually incorporated into the main climate control system. This is not an easy job for a novice because very often you will need to dismantle the instrument panel and dash board to get to the controls. Let me know if you want to go ahead and we'll see where we get to together? Regards John

Jun 30, 2012 | 2004 Dodge Durango

1 Answer

My heater doesnt work. and they told me that i have a flap or something that needed to get replaced. i want to do the work myself but they sad i need to remove my air bag. i was wondering why


IF YOUR TALKING ABOUT THE BLEND DOOR ITS BECAUSE YOU HAVE TO REMOVE THE ENTIRE DASH NORMALLY CHARGE ABOUT 7 HOURS TO DO THIS, HOWEVER THE BLEND DOOR MOTOR IS EASY TO REPLACE

Dec 03, 2010 | 1999 Ford Taurus

1 Answer

Afternnon, just wondering about the best way to locate the blend doors in the hvac box without ripping out the dash on my 2000 jeep grand cherokee. Thanks in advance. Duane


y9ou can gain access to the driver side blend door actuator by removing the glove box. The actuator will be in the left corner of the glove box opening. If you remove the actuator you will be able to turn the pin. If you can turn it 360 degrees the blend door is broke.

If your lucky its only the drivers side. If you get the repair kit from chrysler it will come with instructions with pictures on how to replace the blend door without pulling the HVAC unit/Dash. If the passenger side is broken the HVAC unit will need to be removed.

Heater treater (google them) also have a metal blend door replacement and instructions online on how to replace them without pulling the HVAC housing.

Nov 28, 2010 | 1999 Jeep Grand Cherokee

1 Answer

My 01 chevy venture blend door acuator is not working. Is there a way to manually change it when the summer gets here? The ac worked just fine this last summer but I had no heat. The shop manually changed...


Your blend door in the Venture is on the driver side of the van, under the dash just above your right knee at the side of your plenum. You will see a white arm that will move to adjust the blend door. The blend door actuator sits on top of the plenum held down with 3 screws. If you did not want to diagnose the problem you could just wire it in place for summer or winter. Personally I would try and diagnose the problem. Hope this helps.

Mar 16, 2010 | 2001 Chevrolet Venture

1 Answer

Were is the blend door located on the 2004 jeep grand cherokee overland


blend doors are located in the heater box behind the dashboard.. if you are having heating problems because of faulty blend doors, try heatertreater.com they have a permently quick fix solution that really does work. i have fitted quite a few with no problems, even better heat than standard jeep blend doors..
hope this helps

Dec 24, 2009 | 2004 Jeep Grand Cherokee

1 Answer

How to replace blend door actuator in a ford


I recently did mine, I hear you can do it without taking the entire dash apart but I had no luck with it myself. I have to get ready for work but, on mine it was located down and to the left of the radio. its a white box...are you hearing a clicking noise or something? I had to roll the entire dash back and it was still a major pain getting it out.

Dec 06, 2009 | 2003 Ford Explorer

1 Answer

The heating and air works but doesn't blow hot or cold air there is a part under the dash board that is missing some kind of valve,could you please help me with this


There is a blend door that is know to give problems. Sometimes the blend door itself will break but there is also a blend door actuator that can fail. The blend door actuator is located behind the dash...kinda behind the temperature control knob and is a pretty easy fix if you're able to hang upside down under your dash for about 20 minutes. The actuator costs around $50.
I've never replaced the blend door itself, but have read up on it when I thought that might be the problem. Let's just say the part is cheaper but clear your weekend. I think step one of building a Taurus is the blend door....it's buried in there.
Hope this helps.

Oct 25, 2009 | 1997 Ford Taurus

Not finding what you are looking for?
2005 Hyundai Tucson Logo

114 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hyundai Experts

yadayada
yadayada

Level 3 Expert

74896 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7688 Answers

Are you a Hyundai Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...