Question about Cars & Trucks

Open Question

I need torque specs, and a assembly diagram of a Iveco F4GE diesel motor

Assembly details, for setting the timing gears, and the Rods. Also torque specs for the complete motor

Posted by on


6 Suggested Answers

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017

  • 783 Answers

SOURCE: torque specs 7.5 inch rear axle 96 ford ranger

Differential bearing caps 70-85 ft lb
Ring gear bolts 70-85 ft lb
Pinion bearing preload if using original bearings 8-14 lb-in, if installing new bearings 16-28 lb-in

Posted on Jan 30, 2009


SOURCE: need torque specs for a 85 s10 chevy with a 2.5 engine?

here you go!


Posted on Jun 21, 2009

  • 1 Answer

SOURCE: torque specs

2005 Chevy 1500 4x4 front hub bearing assembly, what is the torque spec

Posted on Jun 29, 2009

  • 333 Answers

SOURCE: Replacing front wheel hub assembly on 2006

Caliper mount bolts are 74 ft/lbs
Driveshaft axle nut is 177 ft/lbs
Hub and bearing mounting bolts are 133 ft/lbs

Posted on Sep 10, 2009

Testimonial: "The info on the torgue specs was very helpful. I couldn't find it anywhere. Thanks a bunch!"

  • 540 Answers

SOURCE: torque specs on 2002 chevy

the bolts that hold it to the knuckle are 133 ft.lbs. and the axle nut is 155 ft. lbs.

Posted on Oct 14, 2010

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

All specs on assembly of engin

How can we do that ?we do not know make,model year engine size

Mar 12, 2016 | Cars & Trucks

1 Answer

How do I fix head light range control default on vw touareg

This fault is usually set because of high resistance in the headlight motors. Usually the problem occurs when the gear/rods get dirty and make it hard for the motors to move them. Sometimes the gears can strip out as well. You need to remove the headlight assemblies and inspect/clean/grease the gears and rods. In some cases, the gears and rods need replacement and you can purchase repair kits from the dealer rather than replace the entire assemblies

Jul 09, 2015 | Cars & Trucks

1 Answer

How to remove a cylinder head for a 1964 Austin Healey 3000 safe ?

Drain water out of engine . remove the rocker cover . remove the rocker shaft and rocker assembly . lift out the push rods ( check if rods are the same length and if not check that you keep them in the right sequence for reassembly) . remove inlet and exhaust manifold . Undo the head bolts and lift off the head. Search the web for the manual or cruise the used book shops/ libraries for the manual as you will need it for the settings and torque specs.. Austin engines had little change between vehicles up to 1964

May 20, 2014 | 1964 Austin-Healey 3000

1 Answer

I have a Mazda/Ford B2500 diesel 4x4double cab 96/97model . Would later model Diesel engine say 1999 to 2005 be inter changeable with existing gear box. That is remove old engine and put another engine in...

As the later engine would have a higher torque rating I would be looking at clutch pressure plate size to determine if the whole unit would be a best course of action. If you have both later engine and gear box assembly then I would fit it as a unit then I would know that the gear box would handle the extra torque from the engine.

Sep 07, 2013 | Cars & Trucks

1 Answer

Torque spec for 10.5 ford ring gear

Here is all the specs

Assembly Specifications:
  • Cover Bolt Ft. Lbs. 28
  • Pinion Brg. Preload In. Lbs 16-29
  • Pinion Brg. Preload In. Lbs 8-14 Used
  • Ring Gear Backlash .008"-.015"
  • Ring Gear Bolt to carrier Ft. Lbs. 100-120
  • Side Brg. Caps Ft. Lbs. 70-85
  • Mar 28, 2011 | Ford F-350 Cars & Trucks

    1 Answer

    What are the front wheel bearing torque specs? For 2000 Chev silverado 2500 4x4,motor 6.0.

    Those vehicles should have a hub assembly which incorporates a bearing and hub in one unit. To my knowledge the bearing is not serviceable. The hub assembly is bolted to the steering knuckle, so there actually is no wheel bearing torque. The tire/wheel assembly bolts directly to the wheel flange on the new hub assembly.

    Dec 31, 2010 | Chevrolet Silverado 2500 Cars & Trucks

    1 Answer

    I need a suspension diagram that shows the Inner tie rods.

    The inner tie rods are screwed into ends of the steering rack assembly.

    Look at this diagram. #6 is the rubber boots and #7 is the shaft from the inner tie rods.

    Jun 08, 2009 | 2000 Ford Windstar

    2 Answers

    Torque specs

    the center bolt for cv axle!103ft-lbs,hub bearing assembly bolts!77ft-lbs

    Apr 26, 2009 | Chevrolet Blazer Cars & Trucks

    2 Answers

    Window passenger side gives problem to close

    try squirting some oil with a conventional oil can down the runners either side of the glass,

    Dec 30, 2008 | 2001 Ford Escort ZX2

    Not finding what you are looking for?
    Cars & Trucks Logo

    Related Topics:

    38 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top Cars & Trucks Experts


    Level 3 Expert

    78289 Answers

    Colin Stickland
    Colin Stickland

    Level 3 Expert

    22326 Answers

    Thomas Perkins
    Thomas Perkins

    Level 3 Expert

    14405 Answers

    Are you a Car and Truck Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides