Question about Toyota Cars & Trucks
No year?, wow. now chassic class number or tonnage rating,..,.
try googling yet>?
a diesel right?
that is a wrong name for this engine.
here is what to do .
find out the real name of engine., 5 cylinders, why not at least post that>>
see the wiki, see all diesels, ;pick one
then google like this.
omg,the first google hit. am i lucky?:
just and example.
learn the correct name of your engine off the wiki first
Posted on Dec 22, 2014
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
hey, torque must be done in 3 steps:
1st 22 ft lbs
2nd 43 ft lbs
final 47 ft lbs
use this sequence of tightening:
9 - 3 -1 -6 -8
7 - 5 - 2 -4 - 10
Posted on Jan 14, 2009
Tighten in several passes to 44 foot pounds.
I just wanted to add. Since this is an aluminum cylinder head, I hope you loosened the head in the loosening torque pattern. The pattern opposite of the torque tightening pattern. If not, you stand the chance of warping the head.
Again, since it's an aluminum head, it needs to be checked for flatness. Most aluminum heads need to be surfaced before re-installing.
Tightening torque pattern is as follows:
1.The Drivers side of the engine is the Left side.
From the Front going towards the back; the bolts are numbered 10, 6, 1, 3, and 7.
From the Front going towards the back on the Passenger side; the bolts are numbered 8, 4, 2, 5, and 9.
The Exhaust and Intake Camshaft Bearing Cap bolts go to 9 foot pounds. Tighten gradually. One bolt to the other with so many foot pounds, work back, and forth up to 9lbs.
Camshaft Timing Pulley bolts go to 43 foot pounds. (In a tightening sequence, and gradually)
Posted on Jul 25, 2009
BMW cylinder torque setting all models
According to my service manual as follows.
Cyl head to engine block (torx e12 M10 bolts)
Stage 1 30nm (22 ft – lb)
Stage 2 + 90 degrees
Stage 3 + 90 degrees
Cyl head to lower timing chain cover 10nm (89in – lb)
The tightening sequence is from inside to outside crossover as normal. Loosening sequence is from outside to inside crossover. Remember to set torque wrench at low setting and work gradually up through the whole sequence until you get the desired torque.
Posted on Aug 29, 2009
hi to tighten you have to do it in 4 stages as follows
1st stage 40nm leave 5 mins 2nd stage 60nm leave 5 mins 3rd stage 90 degrees leave 10 mins 4th stage 90 degrees then you are done i will try put order on here i hope this works as follows
10 4 2 6 8 front of engine back of engine 7 5 1 3 9
in that order hope this helps
Posted on May 10, 2010
Tips for a great answer:
May 25, 2015 | Toyota Cars & Trucks
Dec 15, 2014 | Toyota Cars & Trucks
Aug 06, 2014 | Cars & Trucks
Mar 31, 2014 | 2003 Toyota Corolla
Oct 15, 2012 | Toyota Cars & Trucks
Apr 12, 2012 | Toyota Cars & Trucks
Feb 22, 2011 | 1995 Toyota Corolla
Apr 24, 2010 | 1992 Toyota Cressida
Jan 14, 2009 | 1985 Toyota Corolla 2 Door
344 people viewed this question
Usually answered in minutes!