Question about Cars & Trucks

1 Answer

I have replaced the heater resistor because the blower would only work on high speed. It worked fine for about a week but it is now only working high speed again. What is next?

I have replaced. It work fine for about week now it is only work on high speed again. What is next?

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 11 Answers

What's your year make and model? It could have a bad wire harness causing the other speeds to burn up or short. Does anything else not work?

Posted on Dec 11, 2014

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

98 buick heater stop working


Its faulty blower motor resistor. The low and medium speed on blower motor is controlled by resistor and its actual speed is high. So because resistor is not working, blower motors actual speed which is high is working.


It can be faulty blower motor or faulty blower motor resistor. Get the blower motor inspected. If it's faulty it has to be replaced.


=======

For blower motor testing and replacing, check the link below: ----

Blower motor Testing/replacing for all vehicles?

http://repairhelpcenter.blogspot.in/2012/02/blower-motor-replacing-for-all-vehicles.html

------------

These will help.

Thanks.

Dec 14, 2012 | 1998 Buick LeSabre

1 Answer

My heater blowers dnt work and i need to knw where i can locate the resister blocks for my heater blowers so i can ghange them


Its located under dash,or near glove box.

The dash panel lower side has to be out.

HEATER BLOWER MOTOR


Its faulty blower motor resistor. The low and medium speed on blower motor is controlled by resistor and its actual speed is high. So because resistor is not working, blower motors actual speed which is high is working.


It can be faulty blower motor or faulty blower motor resistor. Get the blower motor inspected. If it's faulty it has to be replaced.


=======

For blower motor testing and replacing, check the link below: ----

Blower motor Testing/replacing for all vehicles?

http://repairhelpcenter.blogspot.in/2012/02/blower-motor-replacing-for-all-vehicles.html

------------

These will help.

Thanks.

Nov 28, 2012 | Cars & Trucks

1 Answer

Heater is not working


HEATER BLOWER MOTOR


Its faulty blower motor resistor. The low and medium speed on blower motor is controlled by resistor and its actual speed is high. So because resistor is not working, blower motors actual speed which is high is working.


It can be faulty blower motor or faulty blower motor resistor. Get the blower motor inspected. If it's faulty it has to be replaced.


=======

For blower motor testing and replacing, check the link below: ----

Blower motor Testing/replacing for all vehicles?

http://repairhelpcenter.blogspot.in/2012/02/blower-motor-replacing-for-all-vehicles.html

------------

These will help.

Thanks.

Nov 28, 2012 | 1988 Honda Accord 4 Door

3 Answers

I only get the fan to work on high speed, the lower speeds do not work


Hi!!
The Blower Motor Resistor also called Manual Temp. Control resistor), is fried, replace. The price with floor console $25 and without floor console $65. here is a pic.
87b9810.jpg

the resistor is located on the blower motor housing, fastened by two screws. It is the part where the electrical plug connects, the plug on the pic. goes to the blower motor.
A HELPFUL - 4 THUMBS rating for this solution would be greatly appreciated. Thank you for using FixYa.

Oct 19, 2010 | GMC Yukon Denali Cars & Trucks

2 Answers

Heater blower works on high speed only. Manual


most likely ur multi-switch[fan selector switch] test out put for the other speeds if no output replace switch if good test motor

Mar 03, 2010 | 2001 Chrysler Town & Country

2 Answers

Last week the heater blower motor stopped working on intermediate speeds and would only work on high. Today after working for a little while on high I lost all speeds of the blower motor. Is it the switch...


resistor for sure, the switch would have caused all speeds to fail as it only has one moving contact but the tapped wirewound resistor is a common part for this fault.

Jan 13, 2010 | 1995 Chevrolet C1500

2 Answers

My 02 Stratus heater only works on high. Any idea


Your blower resistor is bad. It controls the mutiple speeds to allow you to go from low/med/high. When it goes bad you get one speed or no speeds....It's about $20-$50 at any local auto parts store. It mounted directly to the speed switch or on the heater plenum unit on the passenger side behind the glove box....

Nov 05, 2009 | 1999 Plymouth Breeze

1 Answer

AC only work on high speed


If the blower motor only works on the high speed it most likely needs to the blower motor resistors replaced. Sometimes when replacing the resistors the dealer recommends that the blower motor be replaced in conjunction. It's believed the blower motor burns out the resistors. The resistor pack is either in the engine bay mounted on the heater box or under the passenger side of the dash board.

Oct 04, 2009 | 2001 Chrysler Town & Country

3 Answers

Blower speeds on ac/heater for 2003 chevy pickup(v6)


Hi, sounds like your blower motor resistor needs to be replaced. If not the resistor, check the blower motor.

Jul 27, 2009 | 2008 Dodge Ram Pickup 1500

1 Answer

A/C only works on high. 1998 Jeep Cherokee.


replace the blower motor resistor. the resistor burns out on the low settings and the only speed left is high because it can handle more current. i have replaced hundreds. i do at least 10-15 a week

Jan 09, 2009 | 1998 Jeep Cherokee

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

30 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

75077 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...