Question about Cars & Trucks

Open Question

Where to buy on/off switch for iheater 1500 - Cars & Trucks

Posted by on

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

4 wheel drive doesnt work 4 wheel selector lights do not come on 1999 chevy Silverado 1500

Can't be to sure with yours. It maybe the switch. On my 2002, I found I had a Transfer Case Control Module issue. Shopped around and found one on Amazon for half the price the local box stores wanted. I would Google this before starting to buy a bunch of parts.

Apr 08, 2017 | 1999 Chevrolet Silverado 1500

1 Answer

My iheater awakened me in the night making a squealing noise. What needs to be repaired? Could it be a fan bearing?

Yes, that is the classic sign of an unlubricated bearing with dry metal on metal rubbing.

Jan 26, 2017 | Cars & Trucks

1 Answer

I own an 2001 Chevy 1500 ls, 5.3ltr. P/u and my power window switch on. Passenger side quit working. My question is, what colors and which wires are the ones I use to hook a temporary switch???

Do your self a favor and buy a new switch you can got one fairly cheep at a junk yard, if you start jumping wires you might confuse the computer that will lead to different problems. You can take the door panel off and pull the window up manually until you get a new switch.

Nov 08, 2014 | Cars & Trucks

1 Answer

Heater wont switch to defrost

You have one or more broken blend doors in your HVAC plenum which was a common problem with 03's. You can buy upgraded parts from Dodge or better yet, go to www, for an easier and more permanent fix.

Sep 11, 2014 | 1998 Dodge Ram 1500 4WD

1 Answer

I own a 2007 dodge ram 1500 with the 5.7 hemi and automatic transmission, my auto 4x4 stays on and wont switch back to 2 wheel drive or 4x4 lock. ive only owned the truck for 2 weeks and its happened each...

The problem may be related to technical service bulletin TSB 03-001-07 which involves replacing the front axle actuator disconnect and a software update. You should be able to Google the TSB and look at the build date listed in the bulletin to determine if it applies to your vehicle.

Apr 18, 2011 | 2007 Dodge Ram 1500 Quad Cab Sport

1 Answer

Head lights going off while draving

that could be in the light switch itself try changing the light switch i would just buy one from the auto weckers and try that dodges are bad for that

Dec 27, 2010 | 1997 Dodge Ram 1500 Club Cab

1 Answer

Have a 1996 Dodge Ram 1500 4x4 i have high beams but no low beams why?

on rare occasions I have seen both low beams burn out I would buy one new bulb and replace either one in the truck if the low beam works with the new bulb then replace the other one as well if the low beam still does not work then replace the headlight switch also check to see if the headlight switch recall was done on that particular truck or if it was under that recall,they had a problem with some of the ram trucks burning up headlight switches but I would check to see if yours might have been one of them there is a wiring upgrade that they will put in at the headlight switch that will cure that,like I said though check to be sure first yours might have not been one of them.

Feb 02, 2010 | 2001 Dodge Ram 1500 Truck 2WD

1 Answer

Shift indicator off on a chevy silv 1500

The problem is your ignition switch.It is located in the steering column.You have to remove the column covers to gain access to the switch.You don`t have to remove the steering wheel but some do to get better access.Buy the switch first so you know what it looks like and you know what to look for.After removal of the switch make sure that the plastic gears on the new switch line up the same as the old one.Also make sure that the shifter is in park before removing the switch.You should also disconnect the battery and wait a 1/2 hr.before you start.Be careful because the horn ring is going to make contact with the switch.You also have to be aware of static electricity because of the air bag inflator module on the steering wheel.Hope this helps.Good luck.

Dec 29, 2009 | 2003 Chevrolet Silverado 1500

1 Answer

Neutral ignition switch

automatic or stick? makes a difference, if it's a stick it's on the chutch pedal if it's an automatic it's on the transmisson where the linkage hooks up to the shifter, remove the linkage by removing the nut that hold the shifter on then remove the screws that hold the safety netural backup light switch on be sure you have the E brake on before removing and chalk the wheels remove the switch and go to the parts store and buy a new switch and replace you will have to disconnect the wire harness connted to the switch as well it is a short wire with 4 wire or sometimes 5 on it when installing the new switch be sure to move the new switch to the forward postion so that it set on the can correctly you can turn the inside ring with your fingers to move it once it is lined up replace hold down screws and replace linkage nut.

May 27, 2009 | 1997 Dodge Ram 1500 Club Cab

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

20 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts


Level 3 Expert

75822 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides