Question about 1999 Chevrolet Malibu

2 Answers

How do i remove passenger side front seat on a chevy malibu

Posted by on

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

How do you remove the drivers seat in the front of a 4 door Chevy Malibu

Posted on Mar 04, 2016

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Chevrolet Master
  • 625 Answers

I don't have one in front of you, so this is a generic answer. Important: unhook wiring connector or connectors under the seat! If you don't, you will rip it out when you remove the seat and it will be a huge expense to repair/replace it. You should see 4 bolts that attached to each seat legs, unbolt these. If there is nothng else attached to it, you simply remove the seat.

Posted on Dec 10, 2014

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Is driver airbag still functional when passenger airbag light is on in a 2010 Chevy malibu?


Hello Collette,

(Owner Manual Page 2-68)
The passenger sensing system turns off the right front
passenger frontal airbag and seat-mounted side
impact airbag under certain conditions. The driver
airbags and the roof-rail airbags are not affected by the
passenger sensing system.
The passenger sensing system works with sensors that
are part of the right front passenger seat. The sensors
are designed to detect the presence of a properly-seated
occupant and determine if the right front passenger
frontal airbag and seat-mounted side impact airbag
should be enabled (may inflate) or not.

I'm not sure if a purse or other light weight objects would activate the passenger airbag but if your display is showing random passenger activation it would be best to have a qualified dealer check into it...better safe than sorry.
http://www.gm.ca/media/owners/manuals/2010_Chevrolet_Malibu_Manual_en_CA.pdf

Jul 19, 2016 | 2010 Chevrolet Malibu

2 Answers

How do I disconnect the horn on a 2002 Chevy Malibu?


Find the horn unit and remove connectors. Insulate connectors.

Feb 13, 2015 | Cars & Trucks

1 Answer

How does spark plug wires go from front to back in fireing order123456 on a 2001 Chevy malibu


rear of engine from passenger side to driver side is 1,3,5
front of engine pass to drivers 2,4,6 and coil pack it goes from left to right cyl 5,2 middle coil 3,6 and end coil 4,1

Sep 19, 2014 | 2001 Chevrolet Malibu

1 Answer

How to remove front passenger side seat


Always disable the air bag system first, to prevent accidental deployment of the air bags. The main airbag module is beneath carpeting under passengers seat. To remove passengers seat, At the rear of the seat remove the two bolts securing the tracks to the floor, tilt the seat up and towards the instrument panel, unplug any electrical connectors beneath and remove the seat. the front plastic track covers can remain in place while the seat track tabs are lifted out of the slots on the floor. ( caution disable airbag before removing the seat ) Good-Day! Hope this helps you!

Sep 12, 2014 | 2000 Chevrolet Malibu

1 Answer

2009 Chevy Malibu power seat won't move


Check for a blowin fuse, Defective relay, Loose wires break in one of the wires, Switch could be shot, OR evan the motor has burn,t out,

Dec 06, 2012 | 2009 Chevrolet Malibu LTZ

1 Answer

How to remove drivers side seat 1999 chevy malibu


Usually configuration on any seat. Slide seat all the way back and take out 2 front bolts. Sometimes the bolts are covered with a plastic cover that needs to be removed. Slide seat all the way forward the remove the 2 back bolts. Then I usually tilt the seat backwards and unhook any wires underneath. Carefully lift seat out of the vehicle being careful not to scratch the car.

Sep 24, 2012 | 1999 Chevrolet Malibu

1 Answer

Horn on my 2004 Chevrolet Malibu won't work. Fuse is good and relay is working properly. Where is the actual horn?


If its like my 99 Chevy Lumina, its behind the front bumper, passenger side. You'll have to take the whole front bumper off. Stupid I know. But thats how Chevy made them.

Aug 19, 2010 | 2004 Chevrolet Malibu

1 Answer

Seat belt is locked up


try rapidly but gently working belt in and out sometimes they will release, the belt is probably twisted

May 09, 2010 | 2006 Chevrolet Malibu

2 Answers

How do i remove the seats in my 99 chevy malibu


They are bolted down at four corners. Slide seat all the way back to locate them. Be careful if you see a computer box because you do not want to actuate the air-bags.

Jul 24, 2009 | Chevrolet Malibu Cars & Trucks

2 Answers

2000 Chevrolet Malibu LS airbag problems


The passenger side airbag is a lot easier then driver side. Take the glove box out and you will see two 10mm bolts holding it in place. When you open the passenger side front door, remove the panel on the side of the dash and you will see yellow connectors.The 1 closest to the front is attached to the air bag, it is clipped into the frame. Just pull it loose and take it out and your done. For the Driver side, it takes a skinny T27 to remove the two star bolts, then just disconnect the horn red clip and ground and install new airbag. The module is located under the passenger seat, underneath the carpet. Kinda stupid but thats where its at. You also need to replace the front impact sensor located behind the grille on the back side of the metal bar to each side. Follow the hood latch down. Also just to make sure, you know to disconnect the battery before you do all this. You don't want new airbags to accidentally deploy.

May 13, 2009 | 2000 Chevrolet Malibu

Not finding what you are looking for?
1999 Chevrolet Malibu Logo

184 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

75797 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8152 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...