Question about Chevrolet Cars & Trucks

1 Answer

What causes aChevrolet z71 to not shift into overdrive and take off in 2nd gear after I change my transmission out 5.3 liter motor with a 4l60e transmission 4-wheel Drive

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Chevrolet Master
  • 5,316 Answers

If you are lucky, bad shift solenoid (common failed part) may cause it to start in second. Other problem of no overdrive (ie: no torque converter lockup) could be as simple as misadjusted brake pedal switch or TCC solenoid. Where did you get this apparently bad transmission?

Posted on Dec 10, 2014

  • Andy Popo Jan 17, 2015

    I would agre, 1-2nd shift solenoid bad will do this.

×

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get to try the service completely Free afterwhich it costs $6 per call and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 2 Answers

SOURCE: Overdrive button on shift knob doesn't work

Most likely the turning on and off might have trigered or burned out your relay switch located in the front of your engine. The overdrive button on your nissan was only ment to be used sporadically and not as a stick vehicle ( According to your expression ). You can purchase this relay in your nearest nissan dealer. Good luck.

Posted on Dec 17, 2008

  • 1114 Answers

SOURCE: 2002 Ford F150 5.4L hard shifting

Have you ever changed the transmission fluid flush and replaced the transmission filter?

Posted on Jan 11, 2009

SOURCE: 94 dodge neon auto tranny

Hi,

Here is some possible reasons why your transmission is having those problems .

* The gear shift linkage is binding
* There is an internal problem in the transmission
* The throttle cable is broken or disconnected
* The vacuum modulator on the transmission is faulty or the vacuum line is damaged
* The electronic transmission control circuit may be faulty

Posted on Feb 26, 2009

matney68
  • 426 Answers

SOURCE: 1997 z71 Transmission removal



  1. Disconnect the battery negative cable.
  2. Raise the vehicle. Support the vehicle. Refer to Lifting and Jacking the Vehicle in General Information.
  3. Disconnect the range selector cable from the transmission bracket and from the transmission range select lever. Refer to Shift Cable Replacement .
  4. Remove the rear propeller shaft. Refer to Rear Propeller Shaft in Propeller Shaft.
  5. Support the transmission with a transmission jack.
  6. Remove the transfer case if equipped. Refer to the appropriate Transfer Case Replacement in Transfer Case:
  7. Transfer Case Replacement (Selectable Four Wheel Drive) . • Transfer Case Replacement (Auto Four Wheel Drive ) . • Transfer Case Replacement (Manual Four Wheel Drive) .
    102329.gif
    tif.gif
  8. Gasoline Engine--Remove the following components:
  9. 7.1. Two bolts 7.2. Two washers 7.3. One nut 7.4. The transmission to engine brace
    102332.gif
    tif.gif
  10. Diesel Engine--Remove the following components:
  11. 8.1. Two bolts 8.2. Two washers 8.3. One nut 8.4. The transmission to engine brace
  12. Remove the transmission rear mount.
  13. Remove the frame crossmember.
  14. Remove the exhaust pipe from the exhaust manifolds. Remove the muffler assembly from the exhaust pipe, if required. Refer to Exhaust System.

  15. 102208.gif
    tif.gif
  16. For the 5.0L Gasoline Engine: Remove the six bolts securing the converter cover to the transmission.
  17. Remove the starter. Refer to Starter Replacement in Engine Electrical.
  18. For the 4.3L Gasoline Engine: Remove the dust plug at the end of the starter mounting port in order to gain access to the converter bolts.

  19. 102335.gif
    tif.gif
  20. For the Diesel Engine and 7.4L/5.7L Engines: Remove the four bolts securing the converter cover to the transmission.
  21. Mark the flywheel and the torque converter alignment.

  22. 102211.gif
    tif.gif
  23. Remove the bolts that attach the torque converter to the engine flywheel.

  24. 102339.gif
    tif.gif
  25. Remove the transmission vent hose.
  26. Disconnect the wiring harness connectors from the vehicle speed sensors and from the park neutral position switch.
  27. Remove all vehicle electrical harness wires, harness clips, tubes, and brackets that may interfere with the removal of the transmission.
  28. Remove the fluid fill tube and the fill tube seal from the transmission. Refer to Filler Tube Replacement .
  29. Plug the fluid fill tube opening in the transmission.
  30. Disconnect the transmission oil cooler pipes from the transmission. Refer to the oil cooler pipe quick connect fittings removal procedure in Oil Cooler Hose/Pipe Replacement .
  31. Plug the transmission oil cooler pipe connectors in the transmission case.
  32. Install the J 21366 in order to keep the torque converter from sliding off of the transmission turbine shaft.
  33. Support the engine with a suitable jack stand before removing the transmission from the engine.

  34. 102341.gif
    tif.gif
  35. 5.0L and 5.7L Gasoline Engine: Remove the studs and bolts securing the transmission to the engine.

  36. 102343.gif
    tif.gif
  37. 4.3L Gasoline Engine: Remove the studs and bolts securing the transmission to the engine.
  38. Pull the transmission straight back from the engine.
  39. Lower the transmission using the transmission jack.
  40. Flush the transmission oil cooler and the pipes whenever you remove the transmission for overhaul, or replacement of the torque converter, the pump, or the transmission case. Refer to Transmission Fluid Cooler Flushing .
  41. Clean the transmission case using a solvent dampened cloth. Do not allow solvent to enter the transmission.
  42. Air dry the transmission.
  43. Clean all hardware and the flywheel cover using solvent. Air dry all the parts.
  44. Inspect all the components for wear and damage.
  45. Inspect all the seals and the fittings for signs of wear.
  46. Inspect the torque converter for stripped or broken weld nuts.
  47. Inspect the transmission case for cracks.

Posted on Jul 06, 2009

  • 151 Answers

SOURCE: 1995 Chevy 1500 Z71...transmission only shifts

It sounds like a vacumm modulator issue.

Posted on Apr 13, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Transmission not shifting into high gear since abs/4x4 code


answer to any 4l60e trouble ' GMT400 - The Ultimate 88-98 GM Truck ...

www.gmt400.com > Street and Track > Transmissions
Mar 5, 2011 - Before guessing at transmission problems, check the fluid level (car warmed up, ... that do not show up as PCM codes (like shift A&B solenoid failures, for example). ... 1-2 shift is delayed and harsh, may not shift into OD: Check TPS for ...goes into 3rd gear: Reaction planetary is worn out due to high miles or ...

GMC Jimmy Transmission Problems - Edmunds

forums.edmunds.com > GMC > GMC Jimmy
Dec 20, 2013 - 1998 Jimmy After truck warms up shifts hard between 1st and 2nd gears. any ideas ... The ABS light stays on,the engine light stay on, the speedo doesn't work, .... I have a 1990 S15 4x4 Jimmy with a manual 5 speed transmission that went out. .... While driving it will only shift into 2nd gear and 3rd no overdrive. and usually ... Ford F-Series Transmission Problems - Edmunds
Dec 18, 2013
Buick Rendezvous Transmission and AWD Problems - Edmunds
Dec 18, 2013
Dodge Dakota Transmission Problems - Car Forums at Edmunds.com
Dec 18, 2013
Ford Transmission Problems - Edmunds
May 14, 1998
More results from forums.edmunds.com

Automatic Transmission May Not Shift Correctly at High ...

repairpal.com > Problems > Toyota > 4Runner

Feb 03, 2016 | Cars & Trucks

1 Answer

How do I fix automatic transmition in 2002 GMC ENVOY 4x4 shifts hard into third will not shift into overdrive already replaced the two solenoids in front before it would not shift to third


How To Rebuild A 4L60E Automatic Transmission - YouTube

? 13:19
https://www.youtube.com/watch?v=JpmJtuVrdWk
Mar 16, 2011 - Uploaded by Nick Stageberg
How To Rebuild A 4L60E Automatic Transmission ... Also here is a link to some common break/fixes that may require a rebuild:... GMC canyon, envoy, safari savana, sierra Sonoma, Yukon, ....Great video, my 96 sierra 4x4 when shifting into high gear motor races as if nothing is there........................always ...

30 Common 4L60E Transmission Problems & Repair ...

www.twincharlotte.com/transmission-repair.../30-Common-4L60E-Trans...
Mar 18, 2011 - The 4L60-E is an automatic shift, four-speed overdrive, longitudinally...... 4l60e 2002 gmc 4x4 was not driven for 1 year,will not shift into 3rd or ... I have a 2005 GMC envoy 4x4 6 Cylinder I assume it is a 460LE Transmission.

Nov 24, 2015 | GMC Cars & Trucks

1 Answer

4L60E Transmission wont shift into 2nd or Overdrive


Check the fluid level. You may want to consider having the transmission flushed. (I recommend BG Products flush system.) Properly flushing the trans removes any varnish the may have built up causing erratic behavior.

Apr 09, 2014 | 1994 Chevrolet C1500

1 Answer

1994 k2500 4x4 wont shift in to 3 and overdrive


This year of GM Transmission doesn't have a vacuum modulator, it is all electronically controlled. And yes a shift solenoid can cause this but that should turn the check engine light on and set a fault code.

Mar 13, 2014 | 1998 GMC Sierra

1 Answer

My 94 z71 4x4 wount shift into 2nd gear or overdrive


anyone is going to need far more information, like what tranny is in it what motor is in it, what happened the last time it worked, have you checked your transmission fluid with the engine running and at operating temperature?, (YES IT MATTERS IF ITS RUNNING OR NOT AND YES TEMP MATTERS)

Mar 24, 2013 | 1994 Chevrolet K1500

1 Answer

1994 gmc Z71 4x4 automatic.****** will not shift out of 2nd gear.What's up?


Shift modulator on the transmission may be bad, or clogged filter. Maybe time to changed oil and filter. Also a simple adjustment on the trans kickdown cable, or a new cable. The cable can stretch enough to cause a shifting problem.

Jan 26, 2013 | 1994 Chevrolet K1500

1 Answer

4l60e going from 1st to 3rd and dont have overdrive any more


You most likely have a broken sunshell inside the transmission. They tend to go out when the transmission is shifted to drive when while still rolling in reverse.

Dec 28, 2009 | 1994 Chevrolet C1500

3 Answers

4L60E Shifts fine in 1st, 2nd, & 3rd but will not shift into OD


check fluid conditon and level, may be a faulty soleniod

Apr 24, 2009 | 1994 Chevrolet C1500

2 Answers

95 GMC Sierra 4L60E will not shift down to 1st or up to 4th.


no power stuck in 3rd gear electric shop unless youve burnt it up good luck...www.TransmissionGarage.com

Jan 28, 2009 | 1995 GMC Sierra

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

138 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

76630 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8514 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...