Question about 2000 Toyota Corolla

1 Answer

After your discription of P0300 and P1305, would this cause the car to surge and jerk after it warms up?

After discriptioin of Code 0300 & P1305. Could this include surging and jerking and enjine dies for no reason? At a red light it will die and setting in traffic and then jerk and hesitate.

Posted by on


1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 20 achievements.


    An expert that got 10 achievements.


    An expert that got 5 achievements.

  • Toyota Master
  • 1,253 Answers

This points towards the number 2 cylinder ignition coil or ignitor circuit malfunctioning. If it is intermittent, your car will have and lose power, making the engine run like a bucking bronco. A diagnosis is in order, it could be a wiring issue or a bad spark plug causing the symptom. Could also be ignition coil or ignition module. Should be a quick repair. After your discription of P0300 and P1305, would t - 25315923-dz1fkxf1fwolart5ai0divhk-5-0.jpg

Posted on Dec 10, 2014

  • alma_sowell Dec 10, 2014

    Thanks so very much!!



1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

ReNissan P0300

a misfire can be mechanical as well as electrical
code p 0300 is random/ multiple misfires detected
low fuel pressure is a probable cause from a problem fuel pressure regulator or problem EVAC system not venting properly causing a vacuum in the tank and starving the pump
erratic could be from valve problems on heating
loose valve seat insert/s, incorrect valve clearance from faulty hydraulic followers, cam shaft lobe failures are all part of the mechanical reason for random /multiple misfires

Oct 01, 2016 | Cars & Trucks

1 Answer

0300 reading

P0300 is a code that indicates the engine has a random cylinder misfire. The causes of this are so numerous as to not to be able to provide any real help without hands on testing. You also may need the engine control computer flashed, many vehicle makes did updates because this code keep setting and no problem was found to justify it.

Jul 01, 2016 | 2001 Nissan Xterra

1 Answer

I have a code p0300 on a 1997 chev c1500 with a 5,0 engine 2wd

code p 0300 refers to random/ multiple cylinder misfires === causes ---spark plugs--HT leads ---injector/s ---ignition coil/s low compression ---wiring--- low fuel pressure

Dec 10, 2015 | Cars & Trucks

2 Answers

What does code p0300 on a jeep liberty mean

just check online: P0300 Jeep; and the10 possibilities will be given you.

Jun 15, 2014 | 2002 Jeep Liberty

1 Answer

Failed emmissions codes 0400-0443-0300

P0300 Random Misfire, means any cylinder at anytime.

P0400 Exhaust Gas Recirculation Flow. EGR passages are full of carbon
clean passages and misfires may go away

P0443 Evaporative Emission Purge Control Valve circuit.

now just because a code is present doesn't mean a part/sensor is bad, just where to look and to test.

Oct 10, 2012 | 2001 Nissan Maxima

1 Answer

P0300 lhs code

A P0300 diagnostic code indicates a random or multiple misfire. If the last digit is a number other than zero, it corresponds to the cylinder number that is can use this tool clear the DTC.

Jun 20, 2012 | 1996 Chrysler LHS

1 Answer

P0300 2006 envoy

P0300 indicates random multiple misfire. The engine computer is detecting a misfire on more than one cylinder.

Apr 20, 2012 | 2006 GMC Envoy

2 Answers

My check engine light on my 07 saturn ion keeps coming on and gives the code p1174 and p0300 what do they mean and how do i fix

1174 is a lean code, and would have to been set first because it will not set when the 0300 is there. 0300 is a random misfire, because it read after the lean code, it was probably caused by the lean condition. 1st check for vacuum leaks from hoses or intake gaskets, you cal listen for a hissing sound, or spray carb cleaner around intake systems, a change in rpm will be noticed when spraying near a vac leak. other probable causes are the upstream 02 sensor, map sensor, or fuel delivery problems. does the vehicle idle porly, or does it miss at the top end?

Dec 19, 2009 | 2007 Saturn ION-2 Quad Coupe

Not finding what you are looking for?
2000 Toyota Corolla Logo

206 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts


Level 3 Expert

78936 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22326 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8836 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides