Question about 2000 Chrysler 300M

2 Answers

My rear tail light s stop worgin i remoe the fuse. And now the computer on starting resets an my tail lights work. But I can't pass smog test because il lights or stop lightsof the resetting

Removed fuse I do not get engine check light

Posted by on

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 6 Answers

I would test the power wire in the rear check your ground wire is not broken and has good clean contact check your brake light switch is good check all of your fuses not just the one if all eslse fails run a jumper wire from the battery to the positive in the back if this works it means you have a bad wire some where and you can run a wire from the tail lamp in to the fuse panel and this will fix your problem

Posted on Dec 11, 2014

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Chrysler Master
  • 1,249 Answers

Sounds like a control module problem. If the symptom is regular a tech can diagnose and repair the problem quickly (translation: cheaper than buying unneeded parts). If you're a gambler, find a wiring diagram and a good junkyard. Bring a tool box and a voltmeter and start pulling parts. You can get a whole milk crate full of modules and parts for 20 bucks or so. Pick a day when it won't rain. My rear tail light s stop worgin i remoe the fuse. - 25315658-dz1fkxf1fwolart5ai0divhk-4-1.jpg

Posted on Dec 10, 2014

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 7 Answers

SOURCE: no dash lights and no tail lights

Check for faulty wires at the fuse block, had one fall off from the block itself from the rear, or it could be a wire break somewhere along the way.

Stop Lights and Blinkers are independant fuse.

Tail lights are on there own fuse and could be a wire break in the rear or removing the bulb and using a metre check for signal at bulb socket where trouble is, Check for disolored connections, Green in color or simular, could be a bad connection which in turn is not letting the curent to other side, Causing a short and loss of power to all remaining lights in curcuit.

Posted on Sep 15, 2008

jmeyer847
  • 185 Answers

SOURCE: resetting the computer

I would reset your computer. CEL will stay on unless you clear the codes or reset the computer. To reset the computer you will need to pull the negative cable off the battery for 20 Seconds, place it back on for 5 seconds then back off for 20 seconds then back on for good. Thanks for using fixya!

Sincerely,

JC

Posted on Dec 06, 2008

  • 1 Answer

SOURCE: 2005 pacifica. Frt Defoster and heat not blowing. rear works

You probably need to replace the thermostat.

Posted on Jan 15, 2009

66 chrgr
  • 1011 Answers

SOURCE: no dash lights on 2005 PT Cruiser

this needs the multifunction switch in the steering column the flasher switch is connected to this!

Posted on Jan 25, 2009

  • 1 Answer

SOURCE: instrument panel lights don't work

please advice, have you solved the problem? I have the same one on my Sebring. Many thanks.

Posted on Apr 06, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

WONT PASS SMOG.. CHECK ENGINE LIGHT IS NOT ON


Even after resetting the computer it may take several days to reset the internal workings of the computer. When i went for my E Test they asked me if my check engine lite was on in the last thirty days and if I reset the computer I was to run the car and come back in two weeks. I drive an 2005 car.

Jan 17, 2016 | 2003 Mercury Sable GS

1 Answer

Turn off or rest check engine light to pass smog


It takes at least one "Good trip" stored in the computer before it will pass a smog check. Simply resetting the light did not fix the problem that caused the light to come on to begin with, and attempting to smog it will only result in a failed test.
You must address the fault first, then reset the system and drive upwards of 150 miles before a "Good trip" has been stored in the computer.

Mar 30, 2015 | 2003 Toyota Avalon XLS

1 Answer

Nissan Xterra Brake Light Fuse Location


It's 15A FUSE 39 in the fuse & fusible link box

Mar 25, 2017 | Nissan Xterra Cars & Trucks

1 Answer

Nissan Xterra Brake Light Fuse Location


Hi, you need to test if the power is coming to the plug for rear brake light. If the power is not there that is your first problems. Also may have earth wire problem.

Jul 20, 2013 | Nissan Xterra Cars & Trucks

2 Answers

Engine Check light


Take it to autozone or another place like it and have them read the codes and tell us what they are.

Jun 19, 2013 | 2011 Jeep Wrangler Sport

2 Answers

My tail lights on my 1999 chevy venture work when they won't to and I think it's a ground short.. But I don't know where to look for it!


get a wiring diagram, follow this circuit, wire by wire, start @ rear, your tail lights, check each bulb, then proceed to front, along frame rail, to switch & fuse block. test for continuity & shorts, bad wires, corrosion, etc

Jan 18, 2013 | Cars & Trucks

1 Answer

My dashboard and rear lights don't work


Assuming this has the V6, the 15A PARK LPS fuse in the underhood fuse block feeds constant power to the auto park lamp relay. When the relay closes, 12V power passes through the 10A INST LPS fuse in the right instrument panel fuse block to the panel dimmer switch and then to the five instrument cluster lamps.

If by "rear lights" you mean everything in the rear lamp assemblies, power for the tail lights (running lights) starts at the 15A PARKLAMP fuse in the underhood junction block, passes through the automatic lamp control (ALC) relay and the right instrument panel junction block to the tail filament of the dual stop/tail lamp and the separate tail lamp on each side. The 12 V power for the stop lamps is protected by the 20A STOPLAMPS fuse in the left I/P junction block, passes through the stoplamp switch when brakes are applied, stop filament of the dual stop/tail lamps. That leaves the turn signals and the hazard lamps. Power for the turn signals originates at the 10A TURNLAMPS fuse in the left I/P junction block and is applied to the hazard switch. Switch output goes to the turn/headlamp/wiper switch for selection of left or right turn signals. That switch output goes to the turn lamp. Power for the hazard function begins at the 10A HAZRD LPS fuse in the left I/P junction box and goes to the hazard switch. Switch output is sent to the left I/P junction box to make the turn signals flash. That's it. Post a comment if you need more information.

Sep 15, 2012 | 2002 Oldsmobile Alero

1 Answer

2009 Impreza 5-door left tail light and turn signal don't work .


first of all check and confirm whether in the fuse box separates the left from right side and see for blown fuse. or check for any disconnection on the rear light

Aug 10, 2012 | 2009 Subaru Impreza 2.5i

2 Answers

I have a Mercedes E420 1997. I am having tail light issues, all the lights work turn sig., brake, back up, but no tail lights. I have changed out both rear tail lights, bulbs, and checked all of the fuses....


Check for power with a test light(not a dvom) at the tail lamp assembly. Test right at the spot where the bulb socket sits. If you have power then i would check the connection tab on the bulb socket itself for pits or corroded tabs. If you do not have power present at test point then double check the fuse chart and see if it says 'electronic' instead of having a fuse amp rating for the tail lamps. If it says electronic for any of the light circuits then it means their is no external fuse that can be replaced and the problem is most likely internal of the headlight switch. Since the headlight switch is actually a power source for the lights. I would start there at this point. Let me know what you find and if you need anything else just let me know

May 14, 2012 | Mercedes-Benz E-Class Cars & Trucks

2 Answers

Tail light doesnt turn on with headlights but works fine as a break light and turn signal, why?


in the rear lights you may have two bulbs one is the turn signal the other one is stop light / tail light the stop light / tail light has two filaments, one for the stop light (21 watt) & one for the tail light (5 watt) it is possible that the tail light filament is blown, try replacing the bulb to see if that fixes the problem,also check all the fuses as well.......hope this helps......cheers.

Aug 15, 2011 | 1994 Cadillac DeVille

Not finding what you are looking for?
2000 Chrysler 300M Logo

49 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chrysler Experts

yadayada
yadayada

Level 3 Expert

75797 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8152 Answers

Are you a Chrysler Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...