Question about 1993 Dodge Ram

1 Answer

Gotta 93 dodge ram 5.2 sb 4x4, it keeps popping coils... and back firing i want to do carb conversion but its 1200 bucks in parts alone. Any thoughts oh yeah and 3 bad injectors. Mice have chewed hell out if the injector harrnesses and than some... maybe i should of gotten rid of this truck along time ago but its to badassto toss away help!!!

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • Dodge Master
  • 45,659 Answers

Problem vehicles just cost money regardless of how badass they are. Having said that the way to fix the problem will be to go to a dodge wreckers ( plenty of them around) and get all the wiring harnesses connected to the engine . Be smart and disconnect and connect as you go so that you do not need a wiring diagram

Posted on Dec 10, 2014

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
bad_dog1
  • 104 Answers

SOURCE: OIL COMING OUT EXHAUST MANIFOLD

If oil is coming out of your exhaust manifold you probably have bad piston rings. you can buy a compression tester at auto parts to verify the problem.

Posted on Mar 09, 2009

  • 17 Answers

SOURCE: i have no fuel injector pulse. the truck is a 92

replace the module in the distributor

Posted on Apr 09, 2009

csmock132
  • 4669 Answers

SOURCE: dodge cummins won't start, fuel reaching injector pump but no fuel coming out of injector pump.

You said you have fuel flowing from the inlet line of the injection pump? But not at the injector lines?

Posted on May 05, 2009

  • 10 Answers

SOURCE: Help w 1994 chevrolet truck

disconnect the batt. is your fuel pump running check fuse listen for it

Posted on May 28, 2009

polarcycle
  • 1392 Answers

SOURCE: Dodge Cummins Diesel injector change

They are a pain in the ****. You have to take the valve cover off, remove the fuel lines, remove the inlet valve, remove the rocker arms, then unscrew the injector out. There is no doubt, that you can do it yourself, just leave yourself 3-4 hours probably.

Posted on Jun 14, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

It mayI have no fire going to the coil or from the coil to the plugs


Have you checked the wiring, the spark @ plug, Power to the coil???

Engine Won't Start No Spark - Auto Diagnosis Repair Help

aa1car.com/library/no_spark.htm
If your engine cranks normally but will not start because it has no spark, or it ... If an engine has a coil-on-plug ignition system with no plug wires, remove one of ...

No-start, No-Spark diagnosing simulated - YouTube

? 5:13
https://www.youtube.com/watch?v=XSWN1M8Hoqo
May 19, 2010 - Uploaded by FrankHurtAuto
Simulation of no start with no spark diagnosing, ... Ignition coiland module test with test light (ScannerDanner Premium lecture) - Duration: ...

getting fire from coil but not to plugs - CarGurus

www.cargurus.com > Questions > Dodge > Ram 1500

CarGurusJun 12, 2013 - 2000 dodge ram 1500 4x4 not getting fire changed distributor cap, coil, pickup ignition, rotor, plugs, plug wires 2 answers. ... 1994 dodge 5.9 just shut off and wont start back up there is no spark or fire from coil or plugs. ... 94 dodge van 318 eng will not start new plugs new crank ...

Ignition Coil Troubleshooting: (No) Fire in the Hole

www.secondchancegarage.com/public/coil-troubleshooting.cfm

Jan 27, 2016 | Cars & Trucks

1 Answer

My 93 chevy 350 has issues. I'm Stumped???????????


back firing through the carby is an indication of valve timing, bad valves, ignition timing or crossed HT leads. Check the firing order

Mar 09, 2015 | Chevrolet Cars & Trucks

1 Answer

I have a 1995 dodge ram 1500 4x4 with a 5.2 l automatic. There is vacuum line sticking up behind the the engine with a vacuum brake hooked to it. where does that go


Not certain... just a thought... I believe Dodge uses vacuum solenoids to switch air flow from floor to vents and to defrost. Perhaps your loose line is from that solenoid. My '93 would go from defrost to floor when climbing a hill because of loss of vacuum. I hope this helps steer you to a solution.

Mar 23, 2014 | 1996 Dodge Ram 1500 Club Cab

1 Answer

2001 DODGE DAKOTA 3.9 AUTO 4X4 IT STARTED WHEN I DROVE TRUNK ABOUT 15-20 MILES WOULD SKIP BUCK BACKFIRE. RAN A SCANNER ON CODES P1391-REPLACED CRANKSENSOR. RAN GREAT DROVE HOME 30MILES. NEXT MORNING WAS...


Yes I have heard of it a few times on this site and it most often wiring harness related, bad branch out splices. Of course the PCM (ECM on earlier models) contains the ignition control module so it is also a suspect part.

Jan 26, 2012 | 2001 Dodge Dakota

1 Answer

We can not figure out why my 1990 dodge ram keeps back firing we replaced the plugs, button, cap,wires and coil and its still back fires


You need to get an exact firing order diaghram for your make,model and engine,

call any autoparts store, and they will give you the firing order for your truck, if one

or more wires are wrong, can cause the engine to backfire or run bad. also make

sure you have the correct gap on your sparkplugs. check and set the timing,

if needed, the auto parts will also have the timing marks position. good luck!

Jul 10, 2011 | 1990 Dodge Ram

1 Answer

I have a 2001 dodge ram 1500 4x4, when I have the truck in 4 wheel drive it fights me when trying to turn. When I try to turn the front gets tight, pops and at times bucks. I think it maybe the U joint but...


Normally manual 4X4 vehicles will jump and buck when turning. When you engage the transfer case to direct power to the front axle it locks the front differential. When driving on dry asphalt there is sufficient traction to cause lurching while turning . In snow ,mud or on wet asphalt there is enough slippage that you won't notice the lurching. In these vehicles the 4X4 is intended for use when driving conditions warrant it, and for normal driving conditions it should be driven in 2WD only.

Feb 04, 2011 | 2001 Dodge Ram 1500 Truck 2WD

1 Answer

1999 Dodge Ram 2500 P/U 5.9L Gas V8 Standard cab Auto transmission 4x4 @ 38K miles. Started and ran January 10,2010 but will not start anymore. Tried Starting fluid down the throat of the carb - nothing....


This could be a number of things...
Crank sensor, cam sensor, coil, PCM, spark control module, ect.
Start with the sparkplugs, make sure they are firing if not work your way back from there spark pligs, wires, coil, control module, cank and cam sensors, PCM this is what i would do if this rolled into my shop.

Jul 18, 2010 | 1999 Dodge Ram 2500 4WD

2 Answers

Firing order of 2003 dodge grand caravan


For the 2003 Dodge Caravan (and Grand Caravan) ALL 3.3L V6 Engines (including the Flex Fuel): Also for 3.8L V6 Engines:

Firing Order:
1-2-3-4-5-6

Cylinders:
........(back).......
|...1....3....5...|
______________
|...2....4....6...|

Ignition Coil:
.......(back)
electrical connection
...........|
..........V
5........1........3
2........4........6
.......(front)

Let me know if this helped, or if you have additional information or questions. Feel Free to contact me at FixYa.com!

Jun 06, 2010 | 2003 Dodge Grand Caravan AWD

1 Answer

Looking for firing and coil order 2004 hemi 5.7


For ALL 2004 Dodge RAM (1500, 2500, and 3500) (2WD and 4WD) 5.7L V8 Hemi:

.........Firing Order:
Coil...1-8-4-3-6-5-7-2
Plug..6-5-7-2-1-8-4-3

This should have been located at the top of the your Intake Manifold.

Let me know if this helped...

Apr 15, 2010 | 1998 Dodge Ram 1500 4WD

Not finding what you are looking for?
1993 Dodge Ram Logo

66 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts

yadayada
yadayada

Level 3 Expert

76848 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6927 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...