Question about Cars & Trucks
Probably the bands and internal clutches for your particular transmission are shot. If you took off the transmission oil pan and looked at the filter you would find pieces of metal in the filter. Some transmissions also have a magnet to pick up some of the disintegrating metal as well. My recommendation is to take it to your trusted auto mechanic and have him find you a good used one or a rebuilt one. If you go to a dealer you will pay thousands. It will still cost over a thousand parts and labor but that's a hell of a lot less than the alternative. Also it would cost you more to have the transmission rebuilt than to get a good, low Milage used one or a rebuilt one from a place that rebuilds them all day. I have been down this road with both engines and transmissions and my info comes from a mechanic with over 50 years of experience that owns his own shop. Good luck. Cost about $1500 or less my way.
Posted on Dec 10, 2014
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: 1992 toyota 4 runner 4wd v6
There is an electronic module called ECT under the dash that controls the transmission ( a small computer), however if you had your vehicle serviced in the recent past the wiring connector (a 3 Pin connector) under the Drivers side (LHD) just before the T/case could have become loose or the wires broken, check this connector out.
Posted on Oct 17, 2008
SOURCE: removing a drive axle from
if you already have the ball joint dissconnect and the axle out of the steering knuckle just pry out the axle at the transaxle assembly. if it doesnt wont to come out try pushing it in and pry it out vary qiuck pull on the pry bar but they are only held in place with a colasable c-clip just giver.it will come dont worry it wont break
Posted on Mar 22, 2009
There only one problem wrong.You dont let your transmission warm up.You transmission has you warm up just like the motor.Try this and i promise when you take off it will shift like no other
Posted on Jun 29, 2009
Tips for a great answer:
Aug 20, 2014 | Cars & Trucks
Aug 20, 2014 | Cars & Trucks
AUTOMATIC TRANSMISSION FLUID AND FILTER?
-----------Transmission fault light on car dash? http://schematicsdiagram.blogspot.com/2011/12/transmission-fault-light-on-car-dash.html
--------Transmission shifting problem? http://schematicsdiagram.blogspot.com/2012/01/transmission-shifting-problem-on-toyota.html
--------Transmission Slips out of 2nd gear?
OD light flashing and transmission fluid leaking?
Why Transmission fluid leaks near radiator?
transmission fluid leaking?
****** wont go in reverse?
Automatic transmission will not go into reverse? http://technoanswers.blogspot.in/2012/02/dodge-automatic-transmission-will-not.html
----------Transmission is making buzzing noise? http://technoanswers.blogspot.in/2012/02/transmission-is-making-buzzing-noise.html
-----------This will help.Thanks.
Feb 22, 2012 | 1992 Chevrolet C/K 3500
Oct 29, 2009 | 1998 Toyota Camry
Aug 27, 2009 | 1994 Toyota Camry
Oct 28, 2008 | 1992 Toyota Camry V6
Sep 01, 2008 | 1993 Toyota Camry V6
Aug 14, 2008 | 2007 Toyota Camry
Jul 15, 2008 | 1990 Toyota 4Runner
66 people viewed this question
Usually answered in minutes!