Question about Jaguar S-Type

1 Answer

As I can solve the problem with this code p1589 en un jaguar s type 2001

Now replace the accelerator pedal and the throttle position sensor and still the problem

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Jaguar Master
  • 1,249 Answers

Could be a wire, a bad connector, bad voltage supply, or a bad data capture. Could need a calibration done or a new engine computer. If you have changed all the easy parts, take it to an authorized mechanic or learn to live with a check engine light. as I can solve the problem with this code p1589 en - 25315267-wng3opgl1pug32fsc4t4fc4i-3-0.jpg

Posted on Dec 10, 2014

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a 2003 S-type jaguar that goes into a limp mode and stops running then the engine system fault shows ,the parkbrake fault and DSC not available also shows. Diagnostic showed codes PO121,P1582??


code p 0121 is associated with the throttle position sensor and accelerator position sensor
causes are from cable adjustment --throttle position and accelerator position sensors
code p0533 refers to ac refrigerant pressure sensor--high input== causes --ac pressure too high (cooling fault -condenser fan not running at radiator-- too much gas --pressure sensor
p 0105 refers to map sensor / barometric pressure sensor --circuit malfunction===causes wiring--- map sensor --baro sensor ECM
code p0566 refers to cruise control master switch== causes --control switch , ---ECM
code p1582 refers to electronic throttle monitor data available which will be associated with the p 0121 code and faults

Jan 08, 2017 | Jaguar Cars & Trucks

1 Answer

I changed everything on a 2007 Chevy uplander the camshaft position sensor And the purged sensor And the throttle body and still the check engine light and the reduce engine power came back on


Reduced Engine Power Mode When the ECM detects a condition with the TAC system, the ECM may enter a reduced engine power mode. Reduced engine power may cause one or more of the following conditions:
?€¢
Acceleration limiting--The ECM will continue to use the accelerator pedal for throttle control, however, the vehicle acceleration is limited.


?€¢
Limited throttle mode--The ECM will continue to use the accelerator pedal for throttle control, however, the maximum throttle opening is limited.


?€¢
Throttle default mode--The ECM will turn OFF the throttle actuator motor and the throttle will return to the spring loaded default position.


?€¢
Forced idle mode--The ECM will perform the following actions:


-
Limit engine speed to idle by positioning the throttle position, or by controlling the fuel and spark if the throttle is turned OFF


-
Ignore the accelerator pedal input


?€¢
Engine shutdown mode--The ECM will disable fuel and de-energize the throttle actuator.
Did you have it checked for DTC's - diagnostic trouble code's related to the reduced engine power ?
All so has APP sensor gas pedal !
Accelerator Pedal Position (APP) Sensor
The accelerator pedal contains 2 individual accelerator pedal position (APP) sensors within the assembly. The APP sensors 1 and 2 are potentiometer type sensors each with 3 circuits:
?€¢
A 5-volt reference circuit


?€¢
A low reference circuit


?€¢
A signal circuit

The APP sensors are used to determine the pedal angle. The engine control module (ECM) provides each APP sensor a 5-volt reference circuit and a low reference circuit. The APP sensors provide the ECM with signal voltage proportional to the pedal movement. The APP sensor 1 signal voltage at rest position is less than 1 volt and increases to more than 4 volts as the pedal is actuated. The APP sensor 2 signal voltage at rest position is less than 0.6 volt and increases to more than 2 volts as the pedal is actuated.
Your best bet is take your vehicle to the dealer !
al

May 03, 2016 | Cars & Trucks

1 Answer

How can I replace the accelerator pedal assembly?


It's easy ! Disconnect the electrical connector , un bolt it .
Removal Procedure
Notice: Handle the electronic throttle control components carefully. Use cleanliness in order to prevent damage. Do not drop the electronic throttle control components. Do not roughly handle the electronic throttle control components. Do not immerse the electronic throttle control components in cleaning solvents of any type.
Remove the connector position assurance (CPA) retainer. Disconnect the accelerator pedal position (APP) sensor electrical connector. Reposition the carpet to access the lower nut.
Remove the accelerator pedal nuts. Remove the accelerator pedal assembly.

Feb 09, 2016 | 2003 Chevrolet Suburban

1 Answer

2001 MDX will not idle


Error Code: P0221
Description:
Throttle Position (TP) Switch/Sensor B
Accelerator Pedal Position (APP) Switch/Sensor B Range/Performance Problem
Possible Cause:
- Accelerator cable adjustment.
- Throttle position (TP) switch/sensor .
- Accelerator pedal position (APP) switch/sensor.
- Check valve clearance, adjust if required.

Mar 03, 2014 | 2001 Acura MDX

1 Answer

Throttle pedal position sensor "A" circuit low input


Sounds like the Throttle Plate is sticking

You were fooled into changing the TPS because of the code

Not the way you diagnose vehicle issues

You find out why a sensor--- good or bad set the code

Get some CRC Throttle Body Cleaner & follow the instructions

Don't need much sprayed around the throttle plate

Then have someone step on gas pedal to confirm success

May need the key on

Your low input is the throttle not returning to home position

Almost like the sensor was telling you what was wrong

Fun stuff isn't it & not easy to understand

Feb 03, 2013 | 2001 Ford Taurus

1 Answer

My estima ACR50 engine warning light come on. toyota scanner reads P1589 ACCELERATOR SENSOR LEARNING, pls help how to solve this problem?


P1589 - TCU Unable To Control Desired Throttle Angle

You need the dealer to check the throttle blade control motor which is part of the electrically controlled throttle body, it may be defective.

Aug 06, 2012 | Toyota Cars & Trucks

2 Answers

Problem code for JAGUAR s-type 2001------ P1576


change the pedal sensor...thrttle is fine and will function properly as soon as its changed..make sure once you change it you turn the key to position two for 5 seconds then turn it back to position one ,then wait ten more seconds and turn the key to postion two for 5 seconds again to allow the ecu to calibrate.And make sure you unplug the neg terminal to do the install...once reconnected follow the above procedure...the crank the car.

Aug 24, 2011 | 2001 Jaguar S-Type

1 Answer

Code P1577 APP sensor output throttle position sensor error


Code 1577 - Pedal position sensor disagreement between sensors

Having read most of the other posts regarding EFM issues it would appear that there are a few main suspects: Brake Switch : Dirty Throttle Body : Throttle Body Connections : Accelerator Pedal Sensor.

Given that the car operates without issue on cruise control and using steering wheel speed adjustment, I am guessing the problem is with the Pedal Sensor.

After tightening the Throttle Position Sensor I had about 4weeks of no warnings. Then on a very rainy day I drove from Dundee to Edinburgh and at the end of the trip the EFM warning re-surfaced. I took the car to get the OBDII codes read and the technician flagged up 1 code: P1577 Pedal Position Sensor Disagreement btwn Sensors.

He cleared the codes and suggested that I might think about cleaning the connections. However since he cleared the codes I have had no more warnings and am reluctant to do anything at present.

I think that all the snow (much of which I dragged into the footwell with my big workies boots) has created a little to much damp in that area and some of the water has evaporated then condensed on the PPS.

Hope helps.

Aug 12, 2010 | 2000 Jaguar S-Type

3 Answers

VITZ 2006 AUTO WITH CODE P1589


p1589 acceleration sensor learning value how fix problems

Apr 11, 2009 | 2007 Toyota Yaris

1 Answer

Throttle Pedal Position Sensor Switch A


its just a sensor. you do not have to replace the entire throttle body.

Mar 16, 2009 | 2000 Jaguar S-Type

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

158 people viewed this question

Ask a Question

Usually answered in minutes!

Top Jaguar Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

yadayada
yadayada

Level 3 Expert

75744 Answers

SPEEDY CAR WORK SHOP...

Level 2 Expert

489 Answers

Are you a Jaguar Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...