Question about 2012 Ford Focus
I change the battery and starter.. but it was same problem.. how can i solve this problem? should i change the pcm?
Are you getting power to the starter , no do not change anything else , should have not changed that , stuff , do not just change parts . when you turn the key , is the dash lighting up, are your headlights coming on , if not and you have a good battery and starter , ck the wire on the back of the alternator , and make sure it is hot should be hot all the time , I mean 12 volts, the red wire , how is your ground wire , if you are not getting any power with the key on and the battery is good and the starter is good and you cked all the wires to make sure none broke , could be you ignition switch , but have to know exactly what it is doing with the key being turned to start . LMK
Posted on Dec 10, 2014
Testimonial: "everything are good.. the dash is also light up.. id treid to remove the ecm relay, and treid to crank the engine, and its crank.. but it doesnt start.. then i put again the ecm relay, and it will be same issue, no crank at all.."
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
Tips for a great answer:
Mar 15, 2017 | 2012 Ford Focus
Oct 13, 2015 | 2008 Ford Focus
Jul 15, 2014 | 2012 Ford Focus
Apr 08, 2014 | 2007 Ford Focus (3 Door) Hatchback
Aug 17, 2013 | 2002 Ford SVT Focus
Nov 04, 2012 | 2003 Ford Focus
Oct 16, 2012 | Cars & Trucks
Car not starting or turning over indicates towards multiple possibilities.
It can be issue with battery or weak battery. But if battery checks out ok, then
it can be starter issue or faulty alternator or problem with low fuel pressure
or no spark at spark plugs due to dirty spark plugs or faulty
ignition coil or injectors getting cracked or dirty and needs to be cleaned.
To confirm the problem, the basic troubleshooting is required.
Click this link below and follow the troubleshooting:------
This will help.
Feb 28, 2012 | 2001 Ford Focus
146 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: