Question about Dodge Cars & Trucks

1 Answer

I have a 99 Dodge Ram - automatic . I can shift into any gear, but it won't move forward unless I put it in low 1. When I get to 10 mph I can shift into drive and it drives fine. No slippin

Made sure transmission fluid was full

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

  • Expert
  • 155 Answers

Sounds like it needs new valve kits, and or a major overhaul, try checking selector linkages are lined up and tight, otherwise, if it has access to the sump pan then, drain fluid, take pan off carefully, look to see a nut threaded over a locking screw, hold screw with screwdriver and loosen nut anti clockwise, once loose, hold nut and turn screw inwards counting how many turns until all the way in and note this number, then turn 5 full turns out, hold screw and tighten nut, replace with new oil, check pan for filings, note and clean refit sump pan.

Posted on Dec 09, 2014

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How many times does a transmission supposed to shift starting from drive in a 1988 dodge ram with a 318 motor


Depends if you have a regular 3 speed automatic, or a 3 speed with overdrive.
Put it in drive, it will start out in first gear, then shift into second at about 15 MPH, into third at about 30-35 MPH. With overdrive, fourth gear will kick in at about 45-55MPH.

Oct 07, 2013 | Cars & Trucks

1 Answer

1996 dodge ram 5.2 auto 318 to shift to 4wd do u put in park or drive and can you shift to and from 4wd on the fly


Need to know what transfer case it has. Most t-cases have synchronized gearing...meaning shift on the fly. A quick test is drive at less than 5 mph, and shift, no gear clash means you have synchros. ****This is only from 2wd to 4 high. 4 low you MUST be stopped(doesn't matter what gear its in).****

Sep 14, 2013 | 1996 Dodge Ram

2 Answers

My 1999 dodge ram 1500 won't shift in first gear it's a automatic what could it be? I added a quart of tyranny fluid but it was synthetic would that be a problem?


is it the rite fluid for that car company--chec bottle make sure--synthetic is bettr--can lower 50 deegrees--cud be the linkage--getta haynes manual for ajust details

Feb 14, 2013 | Cars & Trucks

1 Answer

How do I turn 4wd on?


    • 1 Start your Dodge truck's engine.
    • 2 Turn the electronic transfer case from "2WD" to "4WD Lock" to engage the high range 4WD, if the dodge truck is equipped with an electronic transfer case; otherwise, shift the transfer case lever from "2H" to "4H." The electronic transfer case is located on the instrument panel and is marked with "2WD," "4WD Lock" and 4WD Low." The lever-equipped transfer case is located to the right of your leg and is marked with "2H," "4H" and "4L."
    • 3 Shift the transmission into "Neutral" while the vehicle is either stopped or rolling at 2 to 3 mph to begin engaging in the low range 4WD. Turn the electronic transfer case to "4WD Low," if the Dodge truck is equipped with an electronic transfer case; otherwise, shift the transfer case lever from "2H" or "4H" to "4L."
    Tips & Warnings
    • Indicator lights will come on and alert you that your vehicle is in either the high or low range of 4WD.
    • Do not engage in the low range of 4WD drive if the transmission is in gear; you must shift to "Neutral" first.
    • Many Dodge trucks allow you to shift from 2-wheel drive to the high range of 4WD at up to 55 mph--consult your truck's manual to ensure that this is possible. Do not exceed 55 mph while engaged in the high range of 4WD. Do not exceed 25 mph while engaged in the low range of 4WD.
    • Do not engage in 4WD unless you are on slipper or rocky roads.

Sep 02, 2011 | 2005 Dodge Dakota

1 Answer

1999 3500 dodge 4x4 dually, 47re Tranny. problem existed before and after having my Tranny rebuilt. tried 4 new valve bodies even a new BD VALVE BODY. Truck starts out in 2nd gear when put into...


the transmittion keeps shifting in & out of gear between 45 & 50 mph it shifts to a higher gear then a lower then higher then lower till I get above 50 mph whats the problem & how to fix it

May 03, 2011 | 1999 Dodge Ram

2 Answers

1997 Dodge Ram 4x4 1500 transmission shifting problems.


good day, you may try replacing your automatic transmission fluid, a good run will be noticeable, hope this helps, have a nice day

Feb 08, 2010 | Dodge Ram 1500 Cars & Trucks

1 Answer

99 dodge ram that jerks between 40 and 50 mph


Bring it back to the transmission shop and have them test drive it with the scanner to see if the Throttle Position Sensor (TPS) needs to be replaced. A worn TPS will case the transmission to have shifting problems, the TPE sends voltage signals to the PCM and will control the transmission shift points and firmness. If the TPS has a flat spot and the voltage is down at the point where the transmission needs to shift, there may be a conflict of shift program and needs to be addressed. Good luck and keep me posted.

Dec 08, 2009 | 1999 Dodge Ram 2500 4WD

1 Answer

99 dodge diesal will not shift past 1 st gear


sounds like the speed sensors. there are 2 of them. High and low speed. run about $20 each and are VERY common on dodge's. if you get a code 25 that is the problem.

Jul 22, 2009 | 1999 Dodge Ram

1 Answer

Dodge 2500 RAM 4x4 Tranny problems


the gears in transmission are going out..aka slipping.....check out pavementpounders.com or gotmud.com they cn help you out better on there than on here

Jan 02, 2009 | 1999 Dodge Ram

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

42 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts

yadayada
yadayada

Level 3 Expert

76164 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8273 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...