Question about 2000 Land Rover Discovery

1 Answer

On a Discovery II, year 2000, Which wiring harness connection at the front of the car is used for the front fog lamps?

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Cheetah:

    An expert who has answered 20 or more questions within one hour.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 158 Answers

The one in the engine compartment.

Posted on Mar 11, 2016

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 750 Answers

SOURCE: 2001 landrover dis II headlights are very dim

bulbs wattage may be to high, heat genarated
by them may be to much for plugs try investing in a HID light svstem it uses higher wattage bulbs with out the exsesive heat

Posted on Jul 08, 2009

  • 534 Answers

SOURCE: I want to wire 2 driving lamps into my discovery

Instal a relay (preferably in a mounting socket); Wire one side of the control coil to the +12v mainbeam 'on' circuit.
Take the other relay coil control connection to the additional 'Driving-lamp on' control switch (switched to ground).
Supply relay contacts 'common' with a fused +12V from battery - use wire with sufficient current carry capacity to feed driving lights. Connect switched +12V output to the driving lamps.

Posted on Oct 27, 2009

ronaldo_ross
  • 1056 Answers

SOURCE: Discovery II. Wiper blades get stuck and dont retract

You meant the wiper do not park? That is a problem with the motor assembly, which is responsible for parking the wipers. The switch just turns it on, and off.

Posted on Nov 14, 2009

  • 978 Answers

SOURCE: I own a 2000 land rover discovery ii and the rear

brake light switch is faulty should be in the area of brake pedal just disconeect switch if lights go out you have your problem

Posted on Mar 27, 2010

  • 23 Answers

SOURCE: I own a 2000 land rover discovery ii and the rear

sounds like a faulty brake light switch which was commom on disco2

Posted on May 23, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Where do i find the attachment point to connect harness for fog lamps on a 2004 jeep wj


If it didn't have fog lights the vehicle may not have the wiring harness.

Sep 01, 2016 | 2004 Jeep Grand Cherokee

1 Answer

I have a 97 escort that is not prewired for fog lights and i have noticed a wite harness for power mirrors that is not being used Can i use this to power my fog lights and connect a switch?


i wired my front fog lights on my escort van using the rear fog lamp switch u change the actual switch to the double switch(front an rear fog switch) if you buy this off a scrap car you cut the wiring and connect rear fog plug to bottom of switch and connect front fog wiring to the top plug.

Apr 07, 2014 | Cars & Trucks

1 Answer

Put new foglights on my 2002 hyundai elentra gls but dont know how to wire them


First of all, did the vehicle previously come with fog lamps? I'm assuming it didn't. Normally, each YM (Year/Model) Hyundai wiring harness is complete for every feature which might be included with certain trim specifications. However, you probably don't have the multi-function switch which has the 'Fog Lamp Switch' on it (Left Hand Turn & Parking/Headlamp Switches). However, the wiring for the fog lamps is probably there, you just need the multifunction switch which contains the fog lamp switch. The illustration attached shows where the wire harness plugs into the fog lamp bulb. This connector may be taped up in the wire harness out of the way (since I'm assuming the vehicle didn't originally come equipped with fog lamps).

Aug 29, 2011 | Hyundai Elantra Cars & Trucks

1 Answer

Wiring diagram for spotlights on a discovery I/II (1999) Would like to mount and wire the spotlights up so as they come on highbeam only, and would like to connect it into the ' rear fog light ' switch....


You can find factory wiring diagrams here (free RAVE Download) http://www.landroverresource.com/ And sure you can wire your spots into rear fog switch, depending on watts/draw of your lights you might want to "UP" the fuse rating

Mar 20, 2011 | 1999 Land Rover Discovery

1 Answer

I need the wiring diagram for a 2006 ford f150 xlt super crew headlight in order to wire oem fog light harness to headlight harness to get my fog lights to work.


This is the diagram for the fog lamps ( headlamp is a different cell ).
If you are trying to add them to the existing wiring, do not expect the headlamp switch to cab fuse panel wiring to be there ( that is usually what is missing when you can find the fog lamp connectors under the front of the truck ).

File Save as so you can magnify it with the JPEG viewer you use.

sscullys_90.jpg

Close up of switch
sscullys_91.jpg

Jan 28, 2011 | 2006 Ford F-150

1 Answer

Does a 2000 f 250 have a connection for fog lights in the wiring harness if it did not come with fog lights


There may be a connection in the harness or a place to connect the cabling, but what you'll find out is that the light switch is different for the trucks that have fog lights from the factory. They have a pull-to-activate function for the fog lights and an indicator led on the switch that shows the fogs are illuminated.
I would suggest purchasing an aftermarket fog lamp kit with the entire package...switch, wires, relay etc..cheaper in the long run... not too hard to wire on these either...the toughest part is feeding a wire thru the firewall... but even that's not too difficult.
Hope this helps...

May 31, 2010 | 2000 Ford F250 Super Duty Crew Cabs

1 Answer

Where does the hot wire for aftermarket fog lamps get wired in? hoping to use one of the empty buttons on the dashboard.


The factory wiring harness for the fog lights may already be there, if not you will need a relay and usually the relays have wiring instructions with them, if not the aftermarket fog lights DO have instructions on how to wire them, however you may need a wiring diagram for your vehicle, get a haynes manual it will have it.

Mar 29, 2010 | 2000 Mercury Cougar

1 Answer

How to factory wire fog lights on a 2000 ford f150. pig tail, relay, and fuse are there. Only no wiring from fuse box.


This is a common problem on 97-00 MY trucks, regardless of the trim level ( XL, XLT, Lariat ).

If you install the fog lamp fuse in the BJB ( aka Battery Junction Box, Engine Compartment fuse panel ) Fuse # 9 ( 15 A fuse ) and jumper the normally open contacts in the fog lamp relay socket ( see diagram below ) the fog lamps should illuminate ( to confirm what you have doing on ).
8491ddd.jpg
The problem usually is the main headlamp switch to the BJB is not in place ( this is the yellow wire from the main headlamp switch connector to the relay socket pin #1 ).
One easy route is to make an aux lighting relay & harness, or purchase one online. With this, you can cut the factory ends and attach them to the harness you purchased. There is an air inlet next to where the steering wheel column runs through the firewall. This would give you an easy route to the fog lamp switch. The fog lamp switch, you can buy the factory one, and change the yellow wire from the connector to your added relay, or just add a switch for this function.
This will give you an idea of what the DIY relay and harness would look like.
5954a15.jpg

Hope this helps, more than confuses at this point

Sep 16, 2009 | 2000 Ford F150 Flareside SuperCab

1 Answer

Fog lamps won't turn on


OK, you will need to first check the fog light wiring harness. make sure there are no worn wire lines or connections, replace if you see noticeable flaws in the wiring harness. Next, check the clip that fits over the back side of the fog light bulbs. Make sure that the inside copper pins are in good condition and, the the fit is tight. replace the wiring harness if these clips are worn or not fitting properly.

If the above inspections show no apparent wiring harness issues, you will then need to check for bulb failure. make sure that your fog light bulbs are operational. if the bulbs are ok, replace the switch.

Please rata and have a great day:)

May 20, 2009 | 2008 Chevrolet Malibu

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

61 people viewed this question

Ask a Question

Usually answered in minutes!

Top Land Rover Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

yadayada
yadayada

Level 3 Expert

75797 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8140 Answers

Are you a Land Rover Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...