Question about 2001 Toyota Corolla

1 Answer

Why my car when i turn large light fail and the car try to turn off?

I have a toyota corolla 2001 that when i turn large light on, lights failed and car tried to turn off. The lights is working when i stopped the car on parking everything work good again. But running the car gave a change off light the car start failed tried to turn off.

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Toyota Master
  • 1,249 Answers

Sounds like a loose cable, weak battery, or charging system problem. Start out by making sure all battery and ground and alternator and starter connections are tight. An auto mechanic would make quick repairs out of this problem. why my car when i turn large light fail and the ca - 25314047-wng3opgl1pug32fsc4t4fc4i-1-0.jpg

Posted on Dec 09, 2014

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 1861 Answers

SOURCE: 2001 toyota corolla parking lights stay on

Most likely a bad headlamp switch, UNLESS you have a remote starter hooked up. Corollas with a body computer really do not like remote starters, they cause really bizaare things to happen.

Posted on Sep 25, 2008

  • 651 Answers

SOURCE: Headlights not working, fuses good...

there sounds like a deffinant short some where. you'll need someone that knows electrical to find the sourse. sorry

Posted on Dec 01, 2008

  • 1 Answer

SOURCE: tacoma won't start, or shift out of park.

Try putting foot on brake, or is key in ignition, also over-ride button by shifter. Auto's have safety micro switches in these places so not to have car in drive and start, "extremely dangerous" Try this first easily missed. lol

Posted on Mar 08, 2009

ourhowse
  • 2007 Answers

SOURCE: 2001 Toyota Corolla high beam lights are not

Your switch must be working since your indicator is telling you when the high beams are on, so my guess is that your bulbs are faulty. The high beam part. They probably burnt out one at a time, so you didn't notice until the second one went. Change your bulbs, and see if that solves it. If not, let me know.

Posted on Jul 23, 2009

  • 171 Answers

SOURCE: Blower motor on my 2001 Toyota Corolla

Yes could be the blower relay or loose ground in the blower circuit.
Try your local library they may have a manual with the cicuit diagram.

Posted on Nov 02, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Why my car when i turn large light fail and the car try to turn off?


I also agree with electrical power failure. Either the battery or the alternator is not charging enough current.

check the voltage supply of your alternator, it must be supplying more than 12v and less than 14V.

Dec 09, 2014 | 2001 Toyota Corolla

1 Answer

Toyota corolla 2003 air conditioning green light blinking and cold air not blowing


You've figured out by now the blinking light means the system has a problem. You'll need to find out if the system is low on freon or if a relay or electrical part is failing. The cooling fan could also be failing to come on, which would make the high side pressure exceed the limit and shut down the system.

Jun 24, 2012 | 2003 Toyota Corolla

1 Answer

My maintenance light is still on even though i have changed my engine at 60,000 mileage, what could be the problem and how can i make it stop (toyota corolla 06)


To reset Maintenance light, do the following procedure:

  1. Turn the ignition to run (one position before starting engine).
  2. Ensure odometer reading is shown. Turn ignition off.
  3. While holding down the trip meter reset knob turn the ignition to run (one position before starting engine).
  4. Hold down knob for at least 5 seconds. The odometer indicates "000000" and the light goes off. If the system fails to reset, the light will continue flashing.
  5. Turn the ignition off and then start the engine to verify the indicator has been reset.

Apr 13, 2012 | 2006 Toyota Corolla

2 Answers

Dashboard lights - 2001 toyota corolla


May not be any fuse and if it was other things would not work either. It is most likely the sitch that controls the running and dash board lights.

Oct 23, 2011 | 2001 Toyota Corolla

2 Answers

There is a light on the dash above the fuel level indicator light that flashes on briefly when I turn a corner. I cannot tell what the indicate light is as it is only on for nanosecond. I do not have a...


With the engine off turn the key to on. Then turn the key just past on, but before the starter starts. This should turn all the dash indicator lights on.

Jan 04, 2010 | 2001 Toyota Corolla

1 Answer

Blower motor on my 2001 Toyota Corolla


Yes could be the blower relay or loose ground in the blower circuit.
Try your local library they may have a manual with the cicuit diagram.

Nov 01, 2009 | 2001 Toyota Corolla

4 Answers

2005 toyota corolla ce maint. required need to know how to reset.


To reset the system. Turn the ignition key to the "OFF" position with the odometer reading shown. Turn the ignition key to the "ON" position while holding down the trip meter reset knob. Hold down the knob for at least 5 seconds. The odometer indicates "000000" and the light goes off. If the system fails to reset, the light will continue flashing.

Jun 12, 2009 | 2005 Toyota Corolla

1 Answer

Car dead no power, just an audible beep when I insert key


the battery has failed, or the battery cables are corroded.or both.

May 15, 2009 | 2001 Toyota Corolla

1 Answer

Battery on toyota corolla 2003


make sure battery cables are secure on or into the battery and not loose. If cables are loose it will cause your alternater to fail therfore not fully keeping battery charged. If battery cables are not loose replace battery.

Nov 17, 2008 | 2003 Toyota Corolla

Not finding what you are looking for?
2001 Toyota Corolla Logo

67 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts

yadayada
yadayada

Level 3 Expert

75807 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22133 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8172 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...