Question about 2010 Ford Taurus Limited

1 Answer

Rear Park Aid has no sound - How to you perform a factory reset on a 2010 Taurus?

2010 Taurus - no sound from "rear parking aid". Camera's are fine. All fuses appear to be good. Courtesy call to mechanic said to perform a "factory reset". If that didn't fix it, probably a sensor. How do you do a factory reset?

Posted by on

  • Rusty Echols
    Rusty Echols Dec 09, 2014

    I'll give that a try and report the results. Thanks

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Ford Master
  • 14,585 Answers

He should ahve told you...Any way, you have to check your owners manual. Different resets and personalation is done threw the radio. You have to get to the menu side of the radio. Otherwise the rest has to be done with a scanner.

Posted on Dec 09, 2014

Testimonial: "I'll give that a try and post the results. Thanks Randy."

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Back up camera on 2012 f150 4x4


The blue screen indicates no signal from the back up camera.

Apr 04, 2017 | 2012 Ford F-150

1 Answer

Check rear park aid


You have an electronic failure with your vehicle proximity sensors. Take to the dealer and have a diagnostic test to locate the defective parts

Jul 28, 2016 | Cars & Trucks

1 Answer

HOW DO YOU TURN OFF THE REAR PARK AID?


Page 88 of your owners manual....

Reverse Sensing System (Park assist) (if equipped)
This feature sounds a warning tone to warn the driver of obstacles near
the rear bumper, and functions only when R (Reverse) gear is selected.
1. Select this function from the
SETUP menu to disable the reverse
sensing system feature.
2. Press the RESET control to turn
the rear park assist OFF. When R
(Reverse) gear is selected, PARK AID OFF will be displayed.

Aug 16, 2015 | 2008 Mercury Milan

1 Answer

The screen displays check rear park aid


The Rear Park Aid sounds a warning tone to warn the driver of obstacles near the rear bumper.
CHECK REAR PARK AID is displayed when the transmission is in R (Reverse) and the park aid is disabled.

You can enable it under vehicle settings

May 22, 2015 | 2011 Ford Taurus Limited

1 Answer

Where is the Parking Aid Speaker located on a 2005 Ford Explorer?


Parking aid speaker attached to the parking aid module.



  1. Remove the RH quarter trim panel. For additional information, refer to Section 501-05 .




  1. Disconnect the parking aid module electrical connector




  1. Remove the bolt and the parking aid module.




  1. To install, reverse the removal procedure


  2. The parking aid system is disabled if a fault is detected in one of the 4 sensors, the parking aid speaker, or the parking aid module. This is indicated by the parking aid disabled warning. The parking aid module is on the international standards organization (ISO) 9141 network and can be diagnosed with a diagnostic tool.



  3. Rear Quarter Trim Panel

    Removal and Installation



    All vehicles




    1. Remove the rear door scuff plate.





    1. Remove the C-pillar trim panel. For additional information, refer to C-Pillar Trim Panel in this section.





    1. Remove the D-pillar trim panel. For additional information, refer to D-Pillar Trim Panel in this section.





    1. Remove the liftgate scuff plate trim panel.



    Vehicles with third row seating




    1. Remove the third row seat. For additional information, refer to Section 501-10 .





    1. Position the liftgate opening weatherstrip aside.



    All vehicles




    1. If equipped, remove the luggage assembly cover.





    1. Remove the stowage compartment doors.





    1. NOTE: RH side shown, LH side similar.


      Remove the stowage compartment assembly.





    1. Position the carpet aside.





    1. Remove the brackets.



      • Remove the bolts.







    1. Remove the rear quarter trim panel.

Feb 26, 2015 | 2005 Ford Explorer

1 Answer

Fix rear park aid


THAT 'S BECAUSE IT'S SUPPOSSED TO WHEN IT'S ON GO TO YOUR DASH AND PRESS SELECT THEN RESET TO GO THROUGH THE MENU THEN TURN IT OFF LOOK IN YOUR MANUAL OR DOWNLOAD IT FREE FROM FORD 2010 FORD ESCAPE OWNERS MANUAL IF YOU DON'T HAVE ONE

Feb 19, 2015 | 2010 Ford Escape Limited

Not finding what you are looking for?
2010 Ford Taurus Limited Logo

259 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

75197 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

fordexpert

Level 3 Expert

5481 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...