Question about 1995 Nissan Pickup

1 Answer

How do I replace starter from 1995 Nissan

Nothing

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Master:

    An expert who has achieved Level 3.

  • Master
  • 359 Answers

The basic starter replacement is simple.
1. disconnect the negative battery cable.
2. remove the starter mounting bolts
3. remove the starter
4. disconnect the cables from the starter.

Posted on Dec 12, 2014

Ad

4 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
daves944
  • 1050 Answers

SOURCE: need to replace starter

I'm pretty sure the last time I did this, I went through the right front wheel well after removing the tire. You may have to remove a clamp or two that hold some some steel hydraulic lines, just bend them a little out of the way and you will have access.

Posted on Mar 14, 2009

  • 30 Answers

SOURCE: 1995 nissan 200 sx will not start

check for a live feed to the low tension wire at the starter when a second person operates the ignition key. if no feed check fuses relays and then back of the ignition assembly. has it got an after market alarm fitted that may have gone faulty and has shut down the starting circuit. if so you need to find the wiring that it has been linked into and rejoin the original wiring back together.

Posted on Mar 30, 2009

ZJLimited
  • 17970 Answers

SOURCE: Howm do I replace a starter on a 1995 Nissan

Nissan 240SX/Altima 1993-1998 Repair Guide

Altima
(see Figures 1, 2 and 3)


ef972ea.jpg
Fig. 1: The starter is located to the left of the oil filter housing on the engine block


dfca7b3.jpg
Fig. 2: The starter motor is removed from the bottom side of the engine compartment


04c206e.jpg
Fig. 3: When installing, be sure to align the starter's mounting bolt holes with those in the engine block

  1. Disconnect the negative battery cable.
  2. Raise and support the vehicle safely.
  3. Remove the starter support bracket, as required.
  4. Label and disconnect the starter electrical harness.
  5. Support the starter from beneath the vehicle using a jackstand.
  6. Remove the starter mounting bolts.
  7. Carefully lower the starter from the vehicle.
To install:
  1. Position the starter on the engine and support it using a jackstand.
  2. Install the starter mounting bolts and tighten to 30-37 ft. lbs. (40-50 Nm).
  3. Connect the starter electrical harness.
  4. Install the starter support bracket, as required.
  5. Lower the vehicle.
  6. Connect the negative battery cable.

Hope helped with this (remember rated this help) Good luck.

Posted on Nov 27, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

1995 nissan 200sx when I try to start the vehicle all the lights are on but nothing happens,I can push start it but it won't start on its own,


First of all verify if all wires to the starter are tight. If yes then test the starting unit as follow:1. Disconnect the switch wire from the starter relay and connect a 12M gauge wire to its end on the relay. The wire must be long enough to reach the + pole of the battery.2. With the car in N, touch the + pole of the battery with the tip of the wire.3. If the starter turns then your problem is in the circuit from the switch to the relay. 4. Otherwise consider changing the starter.

Oct 12, 2011 | 1995 Nissan 200SX

2 Answers

1995 nissan altima starters bad how hard 2 replace


Not really easy.
It's under intake manifold , you need a lift.

May 25, 2010 | 1995 Nissan Altima

2 Answers

When i go to start my 1995 nissan pathfinder i turn the key all lights come on but it makes a slight click then nothing what do you think i should check is this something i can fix i also tried to jump...


This is Indicative of a STARTER FAILURE (TRY) Smacking the Starter with a Hammer SOUNDS CRUDE But IS VERY IFECTIVE at Times when the Starter is on its LAST LEG. Replace Starter

May 18, 2010 | 1995 Nissan Pathfinder

1 Answer

95 NISSAN QUEST GXE


coulb be a sticky starter give it a small hit with hammer or double up the battery

Feb 27, 2010 | 1995 Nissan Quest

1 Answer

Howm do I replace a starter on a 1995 Nissan


Nissan 240SX/Altima 1993-1998 Repair Guide

Altima
(see Figures 1, 2 and 3)


ef972ea.jpg
Fig. 1: The starter is located to the left of the oil filter housing on the engine block


dfca7b3.jpg
Fig. 2: The starter motor is removed from the bottom side of the engine compartment


04c206e.jpg
Fig. 3: When installing, be sure to align the starter's mounting bolt holes with those in the engine block
  1. Disconnect the negative battery cable.
  2. Raise and support the vehicle safely.
  3. Remove the starter support bracket, as required.
  4. Label and disconnect the starter electrical harness.
  5. Support the starter from beneath the vehicle using a jackstand.
  6. Remove the starter mounting bolts.
  7. Carefully lower the starter from the vehicle.
To install:
  1. Position the starter on the engine and support it using a jackstand.
  2. Install the starter mounting bolts and tighten to 30-37 ft. lbs. (40-50 Nm).
  3. Connect the starter electrical harness.
  4. Install the starter support bracket, as required.
  5. Lower the vehicle.
  6. Connect the negative battery cable.

Hope helped with this (remember rated this help) Good luck.

Nov 27, 2009 | 1995 Nissan Altima

2 Answers

1995 nissan maxima won't start sometimes


Check the battery cables for corrosion by peeling back the insulation a few inches. Probably all green or white dust. replace the cables

Jul 13, 2009 | 1995 Nissan Maxima

1 Answer

1995 maxima won't start.. Not turning over new


if u have a new battery and is charged most likely
your starter is bad

G

May 03, 2009 | 1995 Nissan Maxima

2 Answers

1995 nissan 200 sx will not start


check for a live feed to the low tension wire at the starter when a second person operates the ignition key. if no feed check fuses relays and then back of the ignition assembly. has it got an after market alarm fitted that may have gone faulty and has shut down the starting circuit. if so you need to find the wiring that it has been linked into and rejoin the original wiring back together.

Mar 30, 2009 | 1995 Nissan 200SX

1 Answer

Test Inhibitor Switch


HELLO I HAVE A 95 NISSAN ALTIMA THAT DID THIS SAME THING AND IT WAS THE STARTER CHANGE THE STARTER AND YOUR PROBLEMS FIXED

Feb 28, 2009 | 1995 Nissan Altima

Not finding what you are looking for?
1995 Nissan Pickup Logo

274 people viewed this question

Ask a Question

Usually answered in minutes!

Top Nissan Experts

yadayada
yadayada

Level 3 Expert

76691 Answers

Phil Lovisek
Phil Lovisek

Level 3 Expert

726 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Are you a Nissan Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...