Question about 2000 Toyota Corolla
How Can i Install the remote starter on my Toyota Corolla 2000
1. Go to the manufacturer's website and find the exact product you have and want to install.
2. Download the installation manual and READ it thoroughly
3. If you don't understand how to install it, find a qualified professional installer locally and have them install it correctly
4. You don't want to mess up your car's wiring; it can lead to untold misery
Posted on Dec 08, 2014
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
should be on the back of the engine block going into the transmission somewhere you may need to get under the car to access it good luck please rate -jeff
Posted on Sep 05, 2008
remove phillips scew and the door handle. remove padded arm rest on the door by lifting it up, and remove 2 screws. You can use a panel tool to remove the plastic toggle like pins holding the panel border in. Be as gentle as possible they may break due to becoming brittle.
Posted on Apr 06, 2009
Do not install the OEM starter - it only works from about 80 feet away and is quite problematic. I just purchased a new V6-AWD with the push button start and the dealer is taking the OEM start out as we speak and taking it for an after market starter.
If you decide to do it yourself (you'll need to be quite mechanically inclined for this install), check youtube as the poster above has suggested - but again I highly suggest you consider an aftermarket starter and save the money that I didn't.
Posted on Jan 18, 2010
Raise the car.
Loosen the fuel filler neck rubber hose clamp. Remove hose from tank. Insert tubing into tank and siphon out all fuel.
Undo the brake line bracket blots and move brake lines out of the way.
Undo the exhaust to muffler flange bolts. Exercise extra care if they appear rusted as they will shear off.
Remove rear seat and undo fuel pump cover. Undo fuel pump bolts.
Disconnect the fuel and return lines.
Support tank with a jack. Undo tank strap bolts. Remove straps.
Lower tank and remove fuel pump.
Drop tank and slide out over exhaust.
Posted on Feb 23, 2010
adjust the accelerator cable.
Posted on Mar 15, 2010
Testimonial: "i thought the idle was ecu controlled,but i see what your saying,ajust cable stop.ie allen screw with locknut to bring up revs.thanks"
Tips for a great answer:
Nov 18, 2016 | Toyota Corolla Cars & Trucks
Mar 14, 2016 | 2005 Toyota Corolla
Sep 13, 2014 | 2001 Toyota Corolla Sedan
Jun 25, 2013 | 2006 Toyota Corolla
Mar 19, 2011 | Toyota Corolla Cars & Trucks
Oct 26, 2009 | 2003 Toyota Corolla
Sep 12, 2009 | 2003 Toyota Corolla
Jul 03, 2009 | 2003 Toyota Corolla
204 people viewed this question
Usually answered in minutes!