Question about 2002 Jaguar X-Type

2 Answers

Tried to replace dashboard cluster on my 02 plate x type jag now wont start at all and flashing up security failed can anyone please shed any light on what the problem may be thanks nigel

Have tried to replace the dashboard cluster and now nothing is happening car wont start just flashing a security failure message car just wont start

Posted by on

Ad

2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Sergeant:

    An expert that has over 500 points.

  • Expert
  • 314 Answers

The problem is most likely your ignition key isn't programmed for the new cluster so what it sees is a mismatch. New clusters some with two new keys. This seems as though you would then also need a new lock cylinder in the ignition and the door. I would try to reprogram. The buttons on your keyfob must be working.

Open the driver's door and leave it open.


Put the key in the ignition. Cycle to "On." Then, turn back one "click" and turn forward again. You should do this four times, relatively rapidly.

Wait for the sound. You should hear a chime from the GEM (General Electronics Module).

Take the key out. Press any button on the keyfob.

Another chime will be heard. This means that key one is now programmed.

These steps need to be repeated if you have more than one key.

Posted on Dec 07, 2014

Ad
  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Genius:

    An expert who has answered 1,000 questions.

  • Jaguar Master
  • 1,100 Answers

The instument pack is part of the pats. security system i guess the pack is saying pecus error, it needs to be programmed to the car so the other modules on the system recognise it, you need find someone with jaguar ids or compatiable diagnostic equipment to carry out this task.hope this helps.

Posted on Dec 07, 2014

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2006 bf falcon Dashboard light flashing red hand with a picture of car in the centre of the hand. Car wont start, any suggestions please.


Security system cannot identify your key. Try other key. If both keys fail, system may need to be repaired.

Aug 06, 2017 | Cars & Trucks

1 Answer

I replaced my 2003 Jag x type ignition lock cylinder and now its flashing security failed on the instrument panel and flashing code 1 5 on the console. Does anyone know what is code 15??


the pats antitheft system d. oes recognise your key check the reluctor ring around the ign lock. it may need reprogramming by someone with jag diag equipment code 15 is a mismatch in the pats system

May 21, 2017 | Jaguar X-Type Cars & Trucks

1 Answer

Chrysler pt cruiser dashboard lights are off


Chrysler PT Cruiser Dash Lights Instrument Cluster lights ...

? 5:02
https://www.youtube.com/watch?v=Xl8B78vBDXk
Jul 8, 2015 - Uploaded by World Mechanics
Chrysler PT Cruiser Dash Lights Instrument Cluster lights ON & OFF Blinking COMMON PROBLEM! We took ...

PT Cruiser Dash Light/Instrument Cluster Removal and ...

? 12:58
https://www.youtube.com/watch?v=rsITrfvYBIE
Jan 22, 2015 - Uploaded by WeekendHandymen
PT Cruiser Dash Light/Instrument Cluster Removal and Replacement ... Chrysler PT Cruiser Dash Lights ...

PT Cruiser dash lights replacement - YouTube

? 3:03
https://www.youtube.com/watch?v=S1dFuACAMk0
May 9, 2013 - Uploaded by 2stroketurbo
A quick overview of how to replace burned out dash lights on a 2005 ... How To Install Replace Engine Ignition ...


Dec 20, 2015 | Chrysler PT Cruiser Cars & Trucks

1 Answer

Car will not turn on unless dashboard works


Unfortunately these cars and the Skylarks by Buick have this issue. The cluster in the dash goes bad and activates the security system, which shuts the vehicle down. Security bypasses won't work due to the cluster issues, and clusters are extremely hard to find. Check some junkyards, but the internet is pretty tapped out.

Jan 19, 2014 | 1997 Oldsmobile Achieva

1 Answer

2001 jag won't start. Security light is blinking


the problem you have is caused by the pats anti theft system is not recognising your key it may be the transponder or you may need a new key and get it programmed by a jag dealer or someone with the needed gear to do it with best advise take it to a jag dealer

Aug 13, 2017 | 2001 Jaguar S-Type

1 Answer

Hello i took off my cluster on my 02 sebring and i have everything apart i want to know which bulb do i replace for my dash lights to work


If you have it all apart, I would replace all of them so you don't have to take it all apart again! Bulbs fail close to each other.

But not the error warning signal lights.

Generally the dashboard lights for the instrument cluster are directly above and below the cluster.

Aug 28, 2011 | Chrysler Sebring Cars & Trucks

1 Answer

200 jag stype no start anti-theft light flashing


Have you another key and fob ?

Try lock/unlock cycle with new key + fob. Your key may be corrupted.

Try also just unlocking the car with the key (not the fob) as soon as you unlock the door put the key in the ignition immediately and see if the car starts.

If you have your radio code it may be worth trying a total reset (leave the car unlocked) disconnect the battery and leave for 20 mins. then reconnect, most systems will then reboot and this MAY help?
Failing all the above it looks like dealer time - more ££ss

good luck !

Oct 28, 2009 | 2003 Jaguar S-Type

1 Answer

Flashing light in gauges


security system . Trun the ignition key on and leave it on for about twenty minutes,(light should stop falshing) then try and start it.

May 20, 2009 | 2000 Pontiac Sunfire

3 Answers

02 jag x-type wont start


Did you figure out what it was? It may be your key. Take it to a locksmith, or perhaps get it replaced.

Jun 30, 2008 | 2002 Jaguar X-Type

Not finding what you are looking for?
2002 Jaguar X-Type Logo

254 people viewed this question

Ask a Question

Usually answered in minutes!

Top Jaguar Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22326 Answers

yadayada
yadayada

Level 3 Expert

78289 Answers

SPEEDY CAR WORK SHOP...

Level 2 Expert

489 Answers

Are you a Jaguar Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...