Question about Ford Cars & Trucks

1 Answer

Just installed a multi-function switch on a 1995 Ford Escort 1.9L wagon. The "Clock Spring", instructions say to "Turn clockwise to lock, and backoff 3 turns & align arrows" Is this done before starting the engine or after it's running with everything back in place?

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Ford Master
  • 2,355 Answers

Before starting

Posted on Dec 07, 2014

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Need electrical wiring diagramignition 1995 ford escort wagon


I wasn't sure what part of the ignition you wanted? Make sure battery has a full charge and battery connections all good. The diagram is for ignition switch. The top wires are voltage to ignition switch. The bottom wires are voltage from ignition switch.

26320141-hjoucmhbzfbz3mvwcqcg3lht-4-0.jpg

Oct 20, 2016 | 1995 Ford Escort Station

1 Answer

94 ford escort "clock spring" adjustment


The Clock Spring is not that difficult. It lifts straight out. The easiest way to adjust the clock spring is to remove it, you can rotate it GENTLY all the way one way and then go the opposite direction COUNTING THE ROTATIONS...

Say it is 4 rotations...

Turn it Back to the Neutral position (2 Turns)

Reinstall

Apr 05, 2013 | 1998 Ford Escort

1 Answer

NEED HOW TO DIAGRAM OR SCHEMATICS FOR INSTALLING NEW SWITCH ASSEMBLY TURN SIGNAL WIPER 1995 FORD F150.


Removal

  1. Disconnect battery ground cable
  1. Remove the steering column shroud
  1. Remove two self-tapping screws that attach the multi-function switch to the steering column tube casting. Disengage multi-function switch from casting.
  1. Disconnect the two electrical connectors, using caution not to damage the locking tabs. Do not damage PRNDL cable.
    raineman_15_19.gif

1
Steering Column 2
Screw 3
Multi-Function Switch 4
Wiring to Multi-Function Switch A
Tighten to 2-3 Nm
(18-27 Lb-In)


Installation

  1. Install the two switch electrical connectors to full engagement. The wiring for the switch is to be routed under the PRNDL cable.
  1. Align the mounting holes on multi-function switch with the holes in the steering column tube casting. Install two self-tapping screws making sure to start the screws in the previously tapped holes. Tighten to 2-3 Nm (18-27 lb-in).
  1. For automatic transmission (7003), verify that the PRNDL adjustment is correct.
  1. Install the steering column shroud.
  1. NOTE: When the battery has been disconnected and reconnected, some abnormal drive symptoms may occur while the powertrain control module (PCM) relearns its adaptive strategy. The vehicle may need to be driven 10 miles or more for powertrain control module to relearn the strategy.
  2. Connect the battery ground cable.
  3. Check the steering column tube for proper operation.

I hope this helps, if you have any questions just ask

Jan 01, 2011 | 1995 Ford F150 Styleside Regular Cab

1 Answer

The rpm's in my 1995 escort wagon surge when shifting from 2nd to


It sounds like your clutch is slipping. Does it do it more when the wagon is loaded or going uphill?
Most likely needs a new clutch.

Jul 23, 2009 | 1995 Ford Escort

1 Answer

Key won't turn in my 95 escort wagon


Try pulling the steering wheel hard to the left and right as you try to start the car.

May 19, 2009 | 1995 Ford Escort

1 Answer

How do I install headlight switch on 95 mercury tracer?


  • Headlamps Inoperative
  • Fuse.
  • Headlamp switch.
  • Headlamp relay.
  • Circuit.
  • Bulbs.

Section 11-05: Steering Column Switches 1996 Escort, Tracer Workshop Manual
REMOVAL AND INSTALLATION Multi-Function Switch
Removal
  1. stf~us~en~file=ani_caut.gif~gen~ref.gif WARNING: THE ELECTRICAL CIRCUIT NECESSARY FOR AIR BAG DEPLOYMENT IS POWERED DIRECTLY FROM THE BATTERY. TO AVOID ACCIDENTAL DEPLOYMENT AND POSSIBLE PERSONAL INJURY, THE BATTERY GROUND CABLE MUST BE DISCONNECTED PRIOR TO SERVICING OR REPLACING ANY AIR BAG SYSTEM COMPONENTS.
    Disconnect the battery ground cable (14301) and wait one minute for the backup power supply to be depleted.
  1. Remove the steering wheel (3600). Refer to Section 11-04 for the removal procedure.
  1. Remove the four screws from the lower steering column shroud (3530).




  1. Remove the ignition switch lock cylinder illumination lamp socket from the lower steering column shroud.
  1. Remove the lower steering column shroud.
  1. Remove the upper steering column shroud.
  1. Disconnect the three multi-function switch electrical connectors.
  1. Remove the multi-function switch screws.
  1. Remove the multi-function switch electrical connectors and the multi-function switch (13K359).

Jan 16, 2009 | 1995 Mercury Tracer

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

33 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

76051 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

fordexpert

Level 3 Expert

5516 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...