Question about 1992 Chevrolet C1500

1 Answer

I have a 1992 chevy c1500 with light issues. Left turn signal works fine, right side blinks like 4 ways,along with license plate light.when head lights are on nothing for right side turn signals. Hazards everything works fine. Changed fuse,relays,turn signal switch,flasher. Help I'm lost

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Chevrolet Master
  • 1,250 Answers

It seems to be a ground defect on right side. Do you have the same bulb's number . What about the front flasher. remove right rear lamp assembly remove connector measure voltage between ground and current .reconnect it measure voltage at bulb socket. you should find your problems
hope it helps

Posted on Dec 07, 2014

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do i find the talight relay sensor for a 1997 chevy cavalier


No such thing , tail lights get power from headlamp switch . When you turn on park or head lamps . tail lights light up . License plate lights come on as well as side marker lamps . Unless you thing of the turn signals an hazard lights . There is a flasher relay for that .
Turn/Hazard Flasher
At the left lower instrument panel, near the steering column

Aug 16, 2015 | Cars & Trucks

1 Answer

WHERE ARE THE GROUND WIRES FOR THE FRONT TURN SIGNALS LOCATED ON A 1994 CHEVY C1500


try moving the wires around the socket or could be the flasher

Apr 24, 2014 | 1994 Chevrolet C1500

2 Answers

I have a 94 Chevy C1500 and the right side brake light and blinker are not working. The tail light and reverse light work though, and the right front blinker works but it blinks twice as fast as it...


It could be a bad multifunction (turn signal) switch. The way that switch works, it is possible that it can turn on the front blinker and not the rear one. It also cancels the brake circuit so the turn signal can work with the brake pedal depressed.

However, a more likely cause would be a break in the YELLOW/BROWN wire at the rear of the truck. It is common for the connector to get corroded at the left rear frame area where the bed harness connects to the vehicle harness. If you have trailer connections spliced into the wiring harness, these connections are also prime candidates for corrosion. I would look there first. Inspect these harnesses thoroughly all the way up and into the tail light assembly.

If the wires under the back of the truck look good, then I would check for power coming out of the turn signal switch. The wire at the turn signal switch is plain YELLOW (with no brown tracer). It is Pin (M) on the turn signal switch connector. The front signal is a LIGHT BLUE wire at the turn signal switch Pin (H). If you probe these with a test lamp, they should both work the same except the yellow wire will be hot with the brake pedal depressed and the switch NOT in the left turn position. If there is no power at the switch connector, replace the switch.

May 13, 2011 | 1994 Chevrolet K1500

1 Answer

License plate lights do not work. Bulbs changed still does not work. The right brake light does not work. Changed bulb and plug. Turning signals work, tail lights work. All works on the left side.


Well for the license plat you might wanna check the fuse. and the brake light if one works fine then I'm sure you need a new bulb in the other side. Good luck

Jan 09, 2011 | 1999 Ford Windstar

1 Answer

Brake light, reverse light and turn signal issues


Hello. The symptoms you are describing are likely due to a poor ground. Temporarily install a new ground wire by securing a piece of copper wire to the frame with a self tapping screw. Use this ground wire along with the hot wire to see if each of these lights works. If it does, trace the ground wire back to the frame, unscrew it and clean up the metal with emery cloth so you reestablish a good ground.

Jan 28, 2010 | 2003 Ford Windstar

1 Answer

My turn signal lights dont work. They turn on they


i case you are unaware their are 2 flaher units on this truck one for ts swith and one for the 4 ways

Nov 21, 2009 | 1978 Chevrolet C1500

Not finding what you are looking for?
1992 Chevrolet C1500 Logo

176 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

75797 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8152 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...