Question about Cars & Trucks

1 Answer

Bleed clutch hydraulic system John Deer 4300 Tractor - year 1998

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Cars & Trucks Master
  • 22,219 Answers

Two of you needed here ,put a big screwdriver into the operating arm and pull it back so the piston goes in ,slacken bleed nipple then helper pushes clutch down -hold it down then tighten nipple .repeat a few times and you will feel pressure on the clutch arm ,now get helper to push pedal down and hold it down ,pull bar to push piston in as it moves you open nipple then close it after a squirt of air comes out and repeat this a few times and it should have a hard pedal

Posted on Dec 06, 2014

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get to try the service completely Free afterwhich it costs $6 per call and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Our mechanic who worked on the tractor earlier this week and thought he fixed the clutch. Unfortunately the hydraulic/clutch has air in it and the mechanic does not know to get to it to "bleed" it wi


Loosen the cab mounting bolts, and insert a small hydraulic jack between the cab and frame to get the necessary clearance. The cab will not have to come off, just loosened, and propped up to reach in and bleed the clutch. With out knowing the make and model of the tractor, its hard to get more specific. Get a service manual for the tractor, and it will tell you what needs to be done.

Jan 08, 2015 | Cars & Trucks

2 Answers

How do you bleed a hydraulic clutch on a 1977 corvette


you bleed like you would the brake system. there is a bleeder screw on the slave cylinder that you bleed the system.

Oct 11, 2014 | 1977 Chevrolet Corvette

1 Answer

How to tighten a loose clutch pedal on Ford Laser GLXI 1998 5 speed manual hydraulic clutch


Firstly bleed out any air in the clutch system. If that doesn't t work check for fluid leaks at the slave cylinder and if none replace the clutch master cylinder

Oct 13, 2013 | Cars & Trucks

1 Answer

I'm trying to bleed out the clutch on my 1998 Mazda 626. I am having trouble locating the area I need to press to bleed it. Is there a diagram on the website or somewhere showing where this is at? I know...


The bleed nipple will be located on the slave cylinder which is mounted on the side of the transmission. If you like , you can follow the hydraulic line down from the clutch master cylinder and it will go right to it. Also, if you fill the clutch master cylinder and simply pump the clutch pedal up and down with your hand, this system will eventually self-bleed and the pedal will firm up.

May 02, 2011 | 1998 Mazda 626

1 Answer

Clutch slave cylinder how to bleed


HYDRAULIC SYSTEM BLEEDING Do not use fluid which has been bled from a system to fill the reservoir as it may be aerated, have too much moisture content or possibly be contaminated. Clean the dirt and grease from the cap to ensure that no foreign substances enter the system. It is also important to maintain the fluid level in the clutch reservoir to the top step with hydraulic clutch fluid Hydraulic Clutch Fluid GM P/N 12345347 or equivalent.
  1. Attach a hose to the bleeder screw on the clutch actuator assembly and submerge the other end of the hose in a container of hydraulic clutch fluid.
  2. Depress the clutch pedal slowly and hold.
  3. Loosen the bleeder screw to purge air.
  4. Tighten the bleeder screw to 18 inch lbs. (2 Nm).
  5. Let up on the clutch pedal.
  6. Repeat Steps 2 through 5 until all air is purged from the system.
  7. Fill the reservoir to the top step with hydraulic clutch fluid.
  8. Repeat this bleeding procedure if there is a grinding noise during the clutch spin down procedure.
prev.gif next.gif

Oct 13, 2010 | 1998 Chevrolet Cavalier

1 Answer

How to adjust clutch for 1998 saturn sc2


HYDRAULIC SYSTEM BLEEDING The clutch hydraulic assembly has been filled with fluid and bled of air at the factory. Do not attempt to bleed the hydraulic system. While the unit does not require periodic checking, it must be serviced, when necessary, as a complete assembly. The system is full when the reservoir is half full. Only DOT 3 brake fluid should be added to the system. If the fluid level drops, inspect the system, including the slave cylinder, for leakage. A slight wetting of the slave cylinder surface is normal. Fill the clutch master cylinder reservoir with brake fluid. Be careful not to spill brake fluid on the painted surface of the vehicle.

Aug 11, 2010 | Saturn SC2 Cars & Trucks

1 Answer

My clutch is not angaging need to see how can i bleed


Hydraulic Clutch System BLEEDING The clutch system can be bled using a pressure bleeder. Follow the instructions that come with the pressure bleeder for the proper pressure bleeding procedure. The maximum line pressure while pressure bleeding must not exceed 36 psi (248 kPa). NOTE: To bleed a clutch manually requires the assistance of a second person, a section of hose that is compatible with brake fluid (preferably clear) and fits the slave cylinder bleed screw snugly and a container to catch the fluid that is bled through the system. As brake hydraulic fluid easily absorbs moisture, always use fresh fluid when bleeding a hydraulic system.
  1. Before servicing the vehicle, refer to the precautions in the beginning of this section.
  2. To bleed the system perform the following:
    1. Top off the hydraulic fluid reservoir using a fluid that meets the standards of the vehicle's hydraulic system.
    2. Open the clutch slave cylinder bleed screw and press the clutch pedal to the floor and hold the pedal down.
    3. Close the clutch slave cylinder bleed screw.
    4. Release the clutch pedal.
    5. Check the hydraulic fluid level and top off as necessary.
  3. Repeat the above steps until the discharged fluid is clean and no air bubbles appear during the bleeding process.
prev.gif next.gif

Aug 03, 2010 | 1998 Audi A4

1 Answer

I have a 1998 nissan 300zx My clutch is not working


if it suddenly failed then is probally a hydraulic problem, check for fluid in the master cylinder mounted to the firewall, id the small round one, if its empty, fill it with brake fluid and will need to bleed the system, there is a bleed fitting on the side of the gearbox and a secret one hinding in a supid place on the front strut tower, if you bleed both of these the hydralulic system should work.
If the flud is ok, then the clutch itself is prob stuffed and will require gearbox removal to replace it.

Apr 21, 2009 | 1998 Nissan 200SX

1 Answer

The clutch is stuck down on hyundai 1998 wagon can anyone suggest how to fix?


inspect clutch linkage,hydraulic clutch system,oil level in master cylinder,if its low or empty,check for leakage from master to slave cylinder at transmission release lever,repair and bleed system at slave.

Mar 10, 2009 | 1998 Hyundai Elantra

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

64 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

76630 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...