Question about 2001 Ford Taurus
EVERYTIME I POUR COOLANT IN IT. IT RUNS RIGHT OUT THEM MY CAR RUNS HOT
After you put it, turn on the car and see if it's leaking. Car must warm up first. If you don't see it coming out that might be because its going into the engine. Shut car off and check motor dip stick. Make sure it doesn't have water mixed with oil.
Posted on Dec 06, 2014
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
1. Check the level you filled the coolant to...If you overfilled it this will happen. 2. Did you add the correctly diluted antifreeze? 3. Check to be sure the radiator is unobstructed
Posted on Jun 14, 2008
SOURCE: low coolant light always on
Low coolant means just that, find out if the system is really low or the light is receiving a false signal from the low coolant sensor, just check the level in the coolant recovery tank and the make sure the radiator tank is full, if you are low on coolant then check out why, a leak is probable, most likely a water pump or hose related issue, and no a bad thermostat will not in itself turn on the low coolant light unless the engine boils over and the system becomes low. Remember never ever open a radiator cap on a hot engine, you would be surprised how many professional mechanics get burned this way, be careful..
Posted on Aug 17, 2008
Is your temperature gauge working now? That is of more concern then your heater as you wouldnt know if your engine was overheating until its too late. Your heater core could be clogged, they get clogged quite easily. You can flush them or replace. The part is inexpensive but on some models you have to take out dash to replace them, but on other models it only takes about 30 mins and a few bolts.
Posted on Dec 17, 2008
Hello! There is a Technical Service Bulletin (TSB) #1-15-6 that addresses electrolysis in the cooling system...If this TSB has been installed on your vehicle...There will be a tag on the drivers door with the TSB #...Also, a restrictor will be inserted into the heater core inlet...Lets eliminate this right up front...Check to see if this TSB is installed...
The vehicle does have a closed system...Electrolysis, coupled with air in the system is the likely culprit...Replacing the metal lines with rubber will increase electrolysis, which turns the coolant to a "goop"...Coolant flow is adequate when being pumped, but when you shut the engine off the goop blocks the system...Pressure is high...So coolant spews out...
I'll send a test to determine the level of electrolysis...You will need a DIGITAL multimeter...We'll fix the the electrolysis...flush the system...replace the thermostat...And properly bleed the air...Send comment about TSB and do yo have the digital meter...Guru...........Saailer
Posted on Aug 19, 2010
Testimonial: "No, TSB is not installed. No label, and there was nothing in the heater core inlet when I re-did the system. I own a DMM."
Tips for a great answer:
Apr 28, 2016 | Jeep Cars & Trucks
Aug 23, 2012 | 2009 Pontiac G6 GT
Jul 22, 2012 | 2000 Plymouth Breeze
Aug 10, 2011 | Mitsubishi Galant Cars & Trucks
Jan 23, 2011 | 1996 Lincoln Continental
May 31, 2010 | 1993 BMW 5 Series
May 23, 2010 | 2002 Mercury Cougar
Dec 26, 2009 | 1992 Toyota Camry V6
Dec 09, 2009 | 1993 Toyota Corolla
81 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: