Question about 2000 Subaru Outback

1 Answer

I have a 2000 out back legacy and the blinkers and hazards won't work all fuses are good new flasher and no blown bulbs where do I go from here

Posted by on

  • Kevin Blair
    Kevin Blair Dec 13, 2014

    did you get the hazard switch replaced?

  • Kevin Blair
    Kevin Blair Dec 13, 2014

    also there is a flasher relay hidden up inside the dash this could be the root cause of your issue

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 16 Answers

Check your wiring.

Posted on Dec 06, 2014

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Right indicators not working on Mercedes 270ml, hazards only work on left side. Only checked back bulb(not blown) fuse not blown either. Any help appreciated


check right side bulbs to verify they are correct bulbs especially the tail light bulbs.....commen on imports...if all Bulbs are good then replace flasher unit under dash....before replacing blinker lever at steering column

Aug 13, 2016 | Cars & Trucks

1 Answer

How can i fix the problem blinkers & hazards don't work


If both the blinkers and hazards are not working, check the fuse block for a blown fuse. Also see if your running and brake lights come on. If they do, and there is no blown fuse, try replacing the flasher unit, usually located either near the fuse block or in the glove box area.

Jun 02, 2015 | 1984 Nissan Sentra XE

1 Answer

I have a 2000 dodge neon the blinker on the drivers side is not working and its makes a buzzing noise.


this sounds like the flasher unit is no good and needs to be changed.it is located in the fuse panel under the dash on the drivers side.if you turn on the hazards and check all the bulbs for working,if they are working then you can look under the dash with the hazards on to find the flasher and this will show you what the signal flasher looks like at the fuse panel as they are two different units.

Apr 08, 2011 | 2000 Dodge Neon

2 Answers

No blinkers or hazards...


Check the fuses in the fuse panel area. Check to see that the bulbs are good. Good Luck, Jim

Sep 09, 2009 | 2000 Volkswagen Jetta TDI

2 Answers

96 Dodge Grand Caravan. blinkers not working


check the fuse and relay that control the blinkers, also check all bulbs make sure they are good

Jul 30, 2009 | 2000 Volkswagen Beetle

1 Answer

Location of Flasher


check inside kick panels in front of doors

May 27, 2009 | 1996 Subaru Legacy

2 Answers

Hazards and blinkers not working


There are separate fuses for the turn signals and blinkers, but you should check both of them just to see if they're good.

You may have a burnt out turn signal bulb as well. I know that this sounds like an obvious answer, but a single bulb can sometimes disable the entire system because of the way that some flashers operate.

You could also have a defective turn signal/hazard light flasher. This is located under the dash board on the driver's side between the steering column and the door. You have to remove the sound insulation/kick panel (the cover on the bottom of the dash board) to reach the flasher (it is easy to remove - I don't think you even need tools).

May 16, 2009 | 1997 Pontiac Grand Am

2 Answers

My signal wont work hazard lights are okay and fuse is fine


try a new flasher unit . you will see 2 one is for turn and other is for flashers so just switch them and try it again. good luck

Sep 10, 2008 | Chevrolet Cavalier Cars & Trucks

Not finding what you are looking for?
2000 Subaru Outback Logo

62 people viewed this question

Ask a Question

Usually answered in minutes!

Top Subaru Experts

yadayada
yadayada

Level 3 Expert

75797 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8140 Answers

Are you a Subaru Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...