Question about 2000 Chrysler Grand Voyager

2 Answers

No low beams on 2000 voyager

Nothing so far

Posted by on

Ad

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Chrysler Master
  • 937 Answers

Unlikely but did you confirm that they aren't both burned out?

Posted on Dec 06, 2014

Ad
  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Chrysler Master
  • 14,585 Answers

Replace the turn signal switch. All the lights run threw it. Except the third brake light.

Posted on Dec 06, 2014

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

2000 Plymouth voyager Doesn't have low beam and right headlamp wont turn off. Whats the fix.


Has both problems occurred at the same time?

You could have 2 problems, one being the dimmer switch, and the other being a shorted ground to the headlight relay.

The other thing to check is for corrosion at the relay panel for your headlights and fan controls. That will also cause these gremlins you're experiencing.

May 17, 2016 | 2000 Plymouth Grand Voyager

1 Answer

Low beams do not work on my 05 Bonneville SLE. High beams work? What is the problem & fix? Thanks.


You would need to find out if you have power and ground to the low beam circuit. Then check back thru the relays and the dimmer switch for the problem.

Feb 16, 2015 | Cars & Trucks

1 Answer

Low to highbeam indicator


Make sure your Hi Beam relay is not bad.

Mar 18, 2014 | 2000 Plymouth Voyager

1 Answer

My 2000 Chevy Impala LS high beams will not work. The low beams work fine but when I turn on my high beams, nothing


Check bulbs. had this happen on my intrigue had no high beams but lows worked. If bulbs are fine check fuses and relays.

Oct 20, 2013 | Cars & Trucks

1 Answer

How can I tell which light is the low beam and which one is the high beam?


The low beams are always on the outside of the lens so if you standing in front of the car the far right and far left bulbs are the low beams.

Oct 23, 2010 | 2004 Suzuki Forenza

2 Answers

2000 impala-low beams don't work but high does


sounds like the problem is the dimmer switch, get a price on the dimmer switch. If you have to, get one at a junk yard . It's cheaper.

Dec 31, 2009 | 2000 Chevrolet Impala

3 Answers

No low beams only high beams


bad dimmer switch put on a new one

Nov 09, 2009 | 2000 Plymouth Grand Voyager

1 Answer

How do you adjust the headlights for a 2000 nissan xterra


The adjustment screws/nuts should be located either on the top of the headlamp assembly, behind the headlamp assembly, or near the frame rail by the radiator support.

You will have vertical adjustment screws for each independent beam (separate highs and separate lows, but will be same screw if highs and lows are the same bulb). You may also have additional horizontal adjustment screws as well

Park your car on a level ground 30 feet from a wall and measure the height from the ground to the bulb and mark on a wall (do this for highs beams and low beams if the bulbs are separate, if highs and lows are the same bulb, only do it for the lows)

For Low Beams: If the headlights read VOR, then aim the brightest part or cutoff part just below the mark on the wall. If it says VOL or nothing, aim them 2 inches below the mark on the wall.

For High Beams (if separate from low beams): Aim the headlight directly at the line you marked on the wall.

Oct 16, 2009 | 2000 Nissan Xterra

1 Answer

Adjusting headlights in 1996-2000 rav 4


The adjustment screws/nuts should be located either on the top of the headlamp assembly, behind the headlamp assembly, or near the frame rail by the radiator support.

You will have vertical adjustment screws for each independent beam (separate highs and separate lows, but will be same screw if highs and lows are the same bulb). You may also have additional horizontal adjustment screws as well

Park your car on a level ground 30 feet from a wall and measure the height from the ground to the bulb and mark on a wall (do this for highs beams and low beams if the bulbs are separate, if highs and lows are the same bulb, only do it for the lows)

For Low Beams: If the headlights read VOR, then aim the brightest part or cutoff part just below the mark on the wall. If it says VOL or nothing, aim them 2 inches below the mark on the wall.

For High Beams (if separate from low beams): Aim the headlight directly at the line you marked on the wall.

Mar 03, 2009 | 1999 Toyota RAV4

Not finding what you are looking for?
2000 Chrysler Grand Voyager Logo

43 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chrysler Experts

yadayada
yadayada

Level 3 Expert

76673 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8531 Answers

Are you a Chrysler Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...