Question about 2001 Chrysler Voyager

1 Answer

Step by step replacing the thermostat

Anything i think i know just need to reflesh

Posted by on


1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.


    An expert that has over 500 points.

  • Chrysler Expert
  • 405 Answers

Break free 2 bolts on thermostat housing, loosen hose going into housing and clamp, it will leak some antifreeze. Once the housing is taken off block clean off old gasket material from both surfaces. The block and housing, be careful not to scratch the surfaces. No sharp pointy objects, aluminum is soft. Then take the old thermostat out and put in the new one. Put gasket in place ,align housing and put , bolts in by hand first, so it doesn't cross thread. Just snug bolts and top off system with antifreeze . Start engine ,put on heat and run until thermostat opens. Check for leaks, tighten bolts 1/4 turn should be fine. Add antifreeze in overflow bottle if needed.

Posted on Dec 15, 2014


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

I have a 2007 Grand Prix. It looks like it is over heating on the gauge alittle bit. I also have no air conditioning. Should I replace the thermostat?

How many miles on it ? Has it ever been done before ? Mite as well have cooling system flushed too . New antifreeze , I think 100,000 miles it should be done at . GM had problems with stepper motors in the instrument ,these step motors control the gauge's . Have had an instrument cluster problems ? Bad step motors 03 to 06 but who's to say some where not put in 07 . I replaced a few instrument clusters because gauges not reading right. We can test this at the dealer with factory tech 2 scan tool . Do the cooling fans turn on ?
How to repair GM Instrument Cluster Speedometer Gauge Stepper

I have replaced a few in chevy cavaliers ,besides trucks .

Jun 09, 2017 | Cars & Trucks

1 Answer

Step by step on how to replace a dodge stratus 2005 water pump and Thermostat.

i hope this helps for the water pump. The thermostat is located at top of engine simply follow upper hose to engine and remove housing and replace thermostat.

Jul 03, 2016 | Dodge Cars & Trucks

1 Answer

Step by step instructions on how to change a thermostat on a 1995 acura legend

drain coolant, locate thermostat housing on engine at end of lower radiator hose, loosen clamp to remove hose from housing and disconnect sensor...remove bolts and carefully remove housing from engine. Inspect parts and replace anything worn (such as swollen hoses, damaged housing, defective temp sensor). Sealant is not necessary to re-install the thermostat.

Apr 13, 2013 | Acura Legend Cars & Trucks

1 Answer

How do I replace the Thermostat Housing on a 2008 Dodge Magun 2.7L V6?

It will take more than two hours, because the first step is to allow the car to cool for at least 2 hours. But I think that the thermostat should be replaced by the professional repairman, because the thermostat is very important for the car.

Sep 05, 2012 | 2008 Dodge Magnum

1 Answer

I think i have located the thermostat but there is something mounted about it that would have to be unbolted in order to get to the thermostat, does anyone know what this is and if i can get to the...

You state that you think you have located the thermostat. The part that will need to be unbolted and removed is the thermostat housing. Simply remove the radiator hose and remove the bolts holding the housing in place. You may need to tap the housing gently to break it loose. The thermostat is located in the housing. Be sure to carefully scrap off any remaining gasket on the thermostat housing and the engine where the housing sits. Replace the thermostat and install a new gasket, replace housing, tighten bolts evenly and reattach radiator hose. Top off the radiator to replace any lost coolant.

Jun 28, 2010 | 1998 Mercury Sable

1 Answer

Thermostat, location. I need to replace it but i'm not much of a mechanic. About where on the motor is it located. I think i know but before i loosen anything i want to make sure. Also if the hose looks...

The thermostat is virtually always on the engine end of the upper radiator hose, often under a housing that the hose clamps onto. The water that flows through the upper hose is virtually always the water that the thermostat is allowing to leave the engine and go to the radiator for cooling.

Jun 15, 2010 | 1992 GMC Jimmy

1 Answer

2002 Ford Focus with 90k miles stalls on freeway going 65, then, won't start until it cools down; it won't idle correctly and makes a load rattling noise under the hood. No dash lights and no codes show...

either your mechanic is just a jug head who doesnt know anything or you are being taken for a ride,suggest you get a second opinion from the ford dealer.Possibility this car has been clocked at some times as well so it could have a lot higher mileage hence changing the support mountings?? From your description i think you have cooked this engine and its now cream crackered and someone knows this and is just after a quick earner changing the easy bits leaving you with having paid out so much that then you dont want to get rid of car thinking that its cost you so much,best advice ----trade it in and buy another car because without seeing car its hard to advise but i think you will need a new head gasket and a head skim at the very least

Jun 09, 2009 | 2002 Ford SVT Focus

1 Answer

I need help finding where the thermostat goes

when did you replace the coolant?
flash the radiator and replace with new coolant, if it still runing hot change the themostat.

May 27, 2009 | 1997 Honda Civic

Not finding what you are looking for?
2001 Chrysler Voyager Logo

99 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chrysler Experts


Level 3 Expert

76649 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8522 Answers

Are you a Chrysler Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides