Question about 1996 Chevrolet Corvette

1 Answer

I. have a 1996 corvette no horn. check the horns strait to the battery they work.any suggestions.

Went straight to the battery they blow.is there a relay in the steering wheel?

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Governor:

    An expert whose answer got voted for 20 times.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 17 Answers

It's looking like the horn press is not completing the circuit. Either that, ir the wiring is open circuit somewhere.

Posted on Dec 04, 2014

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

95 GMC Sierra horn does not work, fuse keeps blowing.


the fuse blows because somewhere after the fuse , the wire is dead shorting out to ground
check / replace any horn relays

use a multimeter set on ohms resistance and that will tell you that it is shorting out as it will register as a circuit

Jun 27, 2017 | GMC Cars & Trucks

1 Answer

Corvette horn not working


I have a 1999 corvette and the horn will not blow when pushing on the horn pad. It beeps when locking the car and security system.how do I locate the problem. Thanks Bob

Jul 12, 2012 | 1986 Chevrolet Corvette

1 Answer

JUST BOUGHT A 98 VETTE AND THE HORN DONT WORK. LOOKED AT THE FUSE AND IT WAS BLOWN.PUT A NEW ONE IN AND IT BLEW IT UP. THE RELAY WORKS. ANY SUGGESTIONS!!


disconnect the plug(s) at the horns. install a new fuse. if it blows then the problem in in the wiring. if it doesnt blow, plug in the horns one at a time to find the one that causes the problem. replace horn

Nov 01, 2010 | 1998 Chevrolet Corvette

1 Answer

Horn doesn't work on 2000 Corvette - Where do I start to solve the problem?


First u need to check horn by direct battery supply, before that u can try to hear the horn relay sound. If horn & horn relay is ok then u can check steering horn switch/ Ribbon. Wel, is there glowing chk light ?

May 16, 2010 | 2000 Chevrolet Corvette

1 Answer

Horn on my 2003 corvette is not working


it's probably a burnd fuse i don't think the horn went out tha't car is way new for that problem check the fuse hope this helps.

May 13, 2010 | 2003 Chevrolet Corvette

2 Answers

Purchased 1996 Ford Crown Victoria. On driving it home the cruise control went out. Tried to reset and won't work, as well as the horn. What is the problem?


The horn relay is located toward the front of the engine. It is located just behind the radiator overflow reservoir and attached to the inner fender next to two other relays. It is the only one without a plastic cover over the top of it. FYI, our Crown Vic horn didn't blow, and the cruise didn't work. I changed the relay and still no horn. I decided to check the horns themselves. Found wires disconnected from terminals. Touched wire to horn terminal and horn blew incessantly. (previous owner had disconnected horn rather than diagnose why) Pulled the horn "button" from steering wheel and disconnected the wire leads and horn quit. Disassembled the "button" assembly. Foam had degraded over time between the contacts. (Ford has discontinued this part). Cleaned and replaced foam with Scotch foam mounting squares with holes punched out over contacts (2 layers thick). Re-assembled and viola! Horn and cruise control both work! Relay was bad as was horn button.

Mar 29, 2010 | 1996 Ford Crown Victoria

1 Answer

Replaced horn relay on 1977 Corvette, horn still won't blow??


check for power at the horn, the relay sends the ground

Dec 06, 2009 | 1980 Chevrolet Corvette

1 Answer

1985 corvette horns...


Have you tried replacing the horns themselves? Have you checked all the fuses relating to the horns? Relay? Maybe its the horn button itself? Hope this helps.

May 24, 2009 | 1985 Chevrolet Corvette

1 Answer

Horn stopped working.


if u hear a click that is the realy, so it would not be the problem, most likely the horn is burned out.

Apr 20, 2009 | 1996 Chevrolet Corvette

Not finding what you are looking for?
1996 Chevrolet Corvette Logo

95 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

75744 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8123 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...