Question about Cars & Trucks

1 Answer

What if the back signals work but front dont - Cars & Trucks

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Expert
  • 71 Answers

If you're lucky you may have two burned out front turn signal bulbs, if not it may be a bad ground or problem with the wiring.

Posted on Dec 04, 2014

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a 2001 Pontiac Montana and none of my lights in the back work . I dont know.what it may be and dont know how to fix plz help.


If none of the lights in back work, it sounds like something happened to the main wiring harness. Which is probably beyond your ability to repair at home.
If the parking lights and turn signals work in front you know the fuses are good, so they should also work in back.
The parking lights, turn signals, back up lights and brake lights are on 4 different circuits.

Nov 21, 2015 | Pontiac Cars & Trucks

1 Answer

Front signals arent burnt out but do not flash, back signals work, flash fast


Look in your manual find the relay pull it and take it to a parts store and check it.

Feb 17, 2014 | 1997 Dodge Caravan

1 Answer

My turn signals dont work in the frunt but they work in the back. bulbs are new in the frunt i just put new ones in and still nothing works in the frunt i got a flasher but i dont no where to put it plz...


to start with if the flasher unit was faulty none of the turn signal lights would work, your problem may be the wiring to the front signal lights a loose wire or connector plug,you need to check all the wiring to see if you can find the problem......hope this helps.....cheers.

Sep 19, 2011 | Buick Century Cars & Trucks

1 Answer

In my 88 camaro the low beams dont come on! i can pull the light switch out all the way high beams come on when i get out all the 4 lights on the front of the car work i pull it out just a little bit i get...


ok...silly question, and dont be offended that i asked please, but have you checked the globes...as i have had alot of cusomters coming in with noticing that all the lgiths have blown, but they do not realise until they have none, they dont seem to notice if one goes out ????

Dec 20, 2010 | 1988 Chevrolet Camaro

1 Answer

My left turn signal no longer works on my '00 T&C. Hazards, brakes and right turn signal works. I've replaced both lights in front and back, replace turn signal switch and check fuses'. What else can I...


SOUND LIKE WIRE PROBLEM.YOU NEED A WIRE DIAGRAM TO CHECK THE TURN SIGNAL SWITCH WIRING DONT PLUG A WIRE IF YOU DONT KNOW WHERE IT GOES COULD CAUSE ELECTRICAL BLOW OUT.TRY TO GO ON LINE LOOK FOR AUTODATA DIY COM LOOK FOR ELECTRICAL DIAGRAM.

Nov 18, 2010 | 2000 Chrysler Town & Country

1 Answer

Turn signals not working properly


make sure you have the right bulb on the front if that dont do it you probably have a bad socket.

Apr 21, 2010 | 1997 Nissan Maxima

1 Answer

My hazards in my 1997 camaro rs work, but the back and front turn signals dont. The lights for the signals dont work in the dash either, just the lights for the hazards


check the signal flasher ( little silver or colored can in fuse panel or under dash. 4 ways have 1 flasher and the signals have a seperate flasher. Put hazards on to hear click, to determine which flasher is which. Hope this helps

Apr 13, 2009 | 1997 Chevrolet Camaro

1 Answer

My turn signals will blink very fast until I jiggle the turn signal arm, sometimes turning on the bright lights accidentally. Now only the back left blinker (turn signal) will not come on until I jiggle...


check ur connection....check ur light bulbs front and back and replace the ones who dont work....also undo the stearing casing and look for loose or broken wire...if problem cant be fixed bring it to a auto electrician....
good luck

Mar 07, 2009 | 1998 Chevrolet Lumina

1 Answer

1990 acclaim signal and brake lights


You need to check for power & ground at left rear socket, and clean it & contacts in it well, and may have to squeeze socket a bit to supply better ground to outside of bulb base. If that doesn't work, poke wires going into back of socket with test light, with signal on, and if power present, replace the socket assy. About $5.00

Feb 12, 2009 | 1990 Plymouth Acclaim

2 Answers

Turn signals dont work 97 Geo Metro


There is probably something shorting the front turn signal wires; the car is supposed to turn the signal light circut on and leave it on if it detects a burned out light bulb. The flashers, however, are supposed to work normally no matter what happens.
Hope this helps!

Nov 10, 2008 | 1997 Geo Metro

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

12 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

74945 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...