Question about 1995 Subaru Legacy

1 Answer

1995 subaru legacy reverse is slipping think it could be a solenoid? Which solenoid and where can I find it? Thanks in advance. Yahthay

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Sergeant:

    An expert that has over 500 points.

    Governor:

    An expert whose answer got voted for 20 times.

  • Subaru Expert
  • 180 Answers

This is not an electrical issue as you suspect.
These transmissions operate each gear you select by pressurizing the valve body passage that engages the gear. Get a transmission specialist to test/inspect the valve body to determine the actual cause. It could be as simple as original fluid in the car or the valve body is losing pressure. Worst case is the main pump is failing then getting a working used transmission would be the least expensive repair

Posted on Dec 04, 2014

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

My 1995 subaru legacy lost reverse gear, what could the problem be?


When you loose reverse it is pretty much over for the trans

Only a complete disassembly & rebuild,usually resolve that

Jul 18, 2012 | 1995 Subaru Legacy

1 Answer

1991 subaru legacy wagon automatic shifts fine into 1st , 2nd, & reverse but slips in 3rd & drive


Sounds like the clutches for 3rd Gear are worn out. Need to rebuild or replace the transmission.

Nov 04, 2011 | 1990 Subaru Legacy

2 Answers

Need diagram for 1995 subaru legacy automatic transmission. 176K , Reverse went out about 10 months ago but all other gears shift fine. Have driven from San Francisco to Lake Tahoe 4/5 times with no...


It's a bad solenoid. Reverse and low gears work off the same set of clutches. If you have first gears , then its a solenoid problem. I would first start by pulling plugs, transmission, TCM and everything in between. Check for corrosion, Use an ohm meter and check the wires for continuity. On some models the safety neutral switch/ range selector switch has a lot to do with how the transmission shifts. If the tcm can't read the switch it wont send power to the solenoid. so far I haven't found a place that will sell just solenoids. You have to buy the whole package. These start at about $200.00

Aug 14, 2011 | 1995 Subaru Legacy

1 Answer

HEY GUYS i m having realy big truble bith my transmission i think, its subaru liberty 1995 utomatic ej22 engine, its loose power nd car doesnt moove , engine sounds perfectly fine, i dont know where to...


hi i would suggest checking the amount of oil in the trans by removing the dip stick by the firewall in the centre of the engine bay first if thats low it will cause trans to slip, if thats all good next step would maybe to get trans computer tested

Apr 09, 2011 | 1995 Subaru Legacy

1 Answer

I have a 95 subaru legacy 4 door. When I turn the key it clicks. I repeat this until it finally starts. What could my issue be?


YOU HAVE THE STARTER SOLENOID CONTACTS BURNT. REPLACE THE SOLENOID, OR STARTER WITH A REBUILD ONE.

Nov 08, 2010 | 1995 Subaru Legacy

2 Answers

I have an 1995 subaru legacy with auto trans. Can anyone tell me how many quarts of fluid it takes


i think its 5 qts dexron II but if you look in the owners manuel it will tell you exactly

Aug 25, 2009 | 1995 Subaru Legacy

1 Answer

Fault code 45- how do i repair it?


The code 45 in a later model is for the AWD control module causing harsh shifts. On a 2000 model the warranty per recall is 8 years and 100,000 miles. For your model you can try calling a dealer about recalls.

Jun 02, 2009 | 1995 Subaru Legacy

1 Answer

1995 subaru legacy with new starter and solenoid,every week or two solenoid will click but starter won't engage.I can jump from solenoid to starter and start it.


A solenoid needs so much power to kick in.  I think your battery is getting old and not at full capacity.  Hove it check and replace if needed.

Mar 29, 2009 | 1995 Subaru Legacy

3 Answers

1995 subaru legacy - transmission fluid dipstick?


The Dipstick is on the driver side right next to the starter and yes you also put the fluid in there.

Dec 19, 2008 | 1995 Subaru Legacy

2 Answers

1995 Subaru Legacy will crank but won't run.


You can start by checking the fuel pump and testing it for current but it may also be in the starting system so check to see if the starting solenoid is working properly.

Nov 15, 2008 | 1995 Subaru Legacy

Not finding what you are looking for?
1995 Subaru Legacy Logo

128 people viewed this question

Ask a Question

Usually answered in minutes!

Top Subaru Experts

yadayada
yadayada

Level 3 Expert

75077 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7768 Answers

Are you a Subaru Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...