Question about 2005 Audi A3

Open Question

Hi I have an audi a3 tdi 2006 with fault code po652

Ive just had the crank position sensor changed

Posted by on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad
chet_02
  • 1 Answer

SOURCE: audi a3 electric power steering not working in one direction

79a153a.jpg

Posted on Mar 01, 2009

Ad
  • 1 Answer

SOURCE: My Audi A3 2.0 tdi limp mode/turbo overboost

i also have done a diagnostic test and it states a turbo overboost condition and it drives fine locally but loses power on the motorway and struggles to reach 80mph? any suggestions please email me at shiz86@hotmail.co.uk

Posted on Sep 14, 2009

  • 3 Answers

SOURCE: audi a3 1.9 tdi se 5 door. complete faliure of

what ever you do don't go to a audi shop as it will cost you a £1000.00 with out vat and £32.50 for every half hour of there time. try to resync. switch engine on with spare key and remove the remote fob from the key, shut the door and lock the door with the key within 5 seconds press unlock on the first remote to be coded untill the indicators flash once, wait 5 seconds and press unlock again to confirm this memory position. Remove ignition key and test remote if o.k repeat for other remotes adding extra positions by sitting indicators flash. position 2 will be two flashes. if no flashes then get the fault memory read. This may take a few attempts and lots of sweaing. Regards Samantha

Posted on Apr 26, 2010

TDISLine
  • 1874 Answers

SOURCE: Where is the crank sensor

The Crankshaft Position (CKP) sensor on an Audi A3 2.0 TDI

tdisline_1.png

Posted on Nov 08, 2010

alicantecoli
  • 22156 Answers

SOURCE: Hello, Where is Crank position sensor

testing is easy ,connect to a multimeter on lowest volt /miliamp setting and then pass a spanner head over it rapidly and if it works it will show a voltage ,very slight mind but a voltage

Posted on Aug 01, 2011

Testimonial: "Thanx"

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Hi, on an audi a3 2.0 TDI would the engine position sensor coz the turbo not to kick in properly?


NO THE PROBABLE CAUSE IS A VALVE THAT ADJUSTS THE TURBO PRESSURE!CHECK FOR DTCS FIRST AND LET ME KNOW!!

Feb 20, 2014 | Audi A3 Cars & Trucks

1 Answer

Audi a3 1.6tdi fault code p261a


Got my 2011 audi a3 1.6 tdi se hooked up to a diagnostic machine last night and these were the fault codes that came up _ 01500, 00927, 00979 AND 01499. I KNOW IT'S TO DO WITH THE LIGHTING CIRCUITRY BUT WHAT DOES IT RELATE TO IN REPAIRS?

Aug 13, 2013 | Cars & Trucks

1 Answer

Where is the pollen filter on my Audi A3 1.9 TDi? (51 reg) I've found other model filter locations, but they don't apply to this year. Thanks.


Audi A3 1.9 TDI m.y. 2006 ... 2011
Dust and pollen filter location:

tdisline_851.jpg
Please do rate my response. Thanks!

Aug 29, 2011 | Audi A3 Cars & Trucks

1 Answer

My audi a3 2.0 tdi has cut out and wont start seems like it is turning over realy easy it has done 53k there is and was no fumnny noises there is no warning lights or anything


I would suggest that you scan the computer for fault codes. There are different sensors that control ignition and fuel and any one of these sensors can cause the car to stall and refuse to start. The crankshaft positioning sensor could be the cause if it has failed completely. The check engine light may be burned out , therefore no warning lights.

Feb 19, 2011 | 2005 Audi A3

1 Answer

Where is the crank sensor on an audi a3 20L TDI & how to change it


The Crankshaft Position (CKP) sensor on an Audi A3 2.0 TDI

tdisline_1.png

Nov 07, 2010 | Audi A3 Cars & Trucks

1 Answer

Audi a3 1.9 tdi se 5 door. Complete faliure of central locking system and electric windows. Can anyone offer any suggestions, or has experienced this problem with any audi mode. Thanksl


what ever you do don't go to a audi shop as it will cost you a £1000.00 with out vat and £32.50 for every half hour of there time. try to resync. switch engine on with spare key and remove the remote fob from the key, shut the door and lock the door with the key within 5 seconds press unlock on the first remote to be coded untill the indicators flash once, wait 5 seconds and press unlock again to confirm this memory position. Remove ignition key and test remote if o.k repeat for other remotes adding extra positions by sitting indicators flash. position 2 will be two flashes. if no flashes then get the fault memory read. This may take a few attempts and lots of sweaing. Regards Samantha

Apr 02, 2010 | Audi A3 Cars & Trucks

4 Answers

My Audi A3 2.0 tdi limp mode/turbo overboost


i also have done a diagnostic test and it states a turbo overboost condition and it drives fine locally but loses power on the motorway and struggles to reach 80mph? any suggestions please email me at shiz86@hotmail.co.uk

Apr 21, 2009 | 2005 Audi A3

Not finding what you are looking for?
2005 Audi A3 Logo

Related Topics:

38 people viewed this question

Ask a Question

Usually answered in minutes!

Top Audi Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

yadayada
yadayada

Level 3 Expert

76109 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

14363 Answers

Are you an Audi Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...