Question about Nissan Navara

1 Answer

How 2 fix are leaking tappet on are 1999 model Nerada

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • Nissan Master
  • 45,552 Answers

Leaking hydraulic tappets are a sign of worn out. Best fix is to replace the lot as they will all be worn.

Posted on Dec 05, 2014

Ad

2 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 583 Answers

SOURCE: Tappet clearances

hydraulic

Posted on Aug 04, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

What is the tappet clearance for a 2.7 Diesel Nissan Hardboy 1999 model?


Try setting the valve clearance on your 1999 2.7 Nissan Hardboy diesel to 0.14 inches on the intake and exhaust sides.

Oct 07, 2014 | Cars & Trucks

1 Answer

Number 4 cylinder will not fire on my datsun 620 with a l20b engine


If you havent fixed it yet then .
Then either your distributor cap is cracked/points set to 012" /lead no good/plug no good/tappet totight set tappets to 012" [No 4] cylinder/burnt out exhaust valve/ worn or broken piston rings [No 4 ]or a leaking inlet manifold gasket.,,or sometimes burnt or blown head gasket

Apr 14, 2014 | Datsun 720 Cars & Trucks

1 Answer

Does a 1999 frod contour have hydraulic lifters or mechanical lifters


Both the 2.0 liter 4-cylinder, and the 2.5 liter V6 are overhead cam engines. While all years of the V6 us hydraulic tappets, the 4-cylinder engines varied. From 1998 and earlier, they had hydraulic tappets. From 1999 on, they used shimmed mechanical tappets. Adjusting valve clearance on the later engines is a little involved, and, if you're not familiar with the procedure, it is perhaps best left to a professional mechanic who is familiar with the engine.

Aug 07, 2013 | 1999 Ford Contour

1 Answer

When I removed #4 sparkplug there is oil on sparkplug hole on a 2000 Kia sportage


If oil is on the spark plug tip then it could be from worn valve stems or from worn piston rings. When you accelerate away from the traffic lights and the engine blows a lot of greyish smoke then this is a sign of worn parts.
If the oil is leaking into the spark plug hole, then it could be leaking from the tappet cover, either the tappet cover bolts are loose or the tappet cover gasket is faulty.

Dec 27, 2011 | 2000 Kia Sportage

1 Answer

Tappet cover leaking oil


Pull the value cover, remove the old gasket and replace with a new gasket. Then, reinstall value cover.

Jan 09, 2011 | 1999 Daewoo Lanos

2 Answers

Tappets are making noise when the engine is running


You have hydrolic lifters that pump up with oil pressure. With age, the lifters will leak down when not running and eventually not pump up at all. It is a fairly easy fix and rather than try to figure out which are the culprits, I recommend that you change all. They are not very expensive however there will be probably 4 or 5 hours of labor involved..Good luck! I hope you find this to be very helpful!

Mar 25, 2010 | 1999 Daewoo Lanos

2 Answers

Is there supposed to be oil around the tappets on a diesel engine?


The mechanic should check on the tappets and check some oil seal that are worn out or destroyed .It is the cause that's why there is a leak on the tappet some oil seals are worn out or destroyed. And its the reason why oil flow over or on the tappet.

Aug 27, 2009 | 1978 Ford Granada

1 Answer

I have a 1999 mercury tracer that has 184,000 miles. I'm the third owner....just recently purchased the car for my teen and now I'm being told that it needs a valve lifter. I'm curious as to wonder how...


good for the most part, it got to 184,000 miles didn't it.
WHy do you think it needs a lifter? IS it nosiy?

This is not a big job. Shouldn't cost over $200.

SECTION 303-01A: Engine — 2.0L SPI 1999 Escort/Tracer Workshop Manual
IN-VEHICLE REPAIR Valve Tappet Removal
sxf~us~en~file=ani_caut.gif~gen~ref.gif CAUTION: If removing more than one valve tappet, mark the components removed for proper location.
  1. Remove the valve cover (6582); refer to Valve Cover .
  1. Remove the rocker arm (6564).
  1. Remove the valve tappet(s).
    1. Remove the valve tappet guide plate retainer(s).
    1. Remove the valve tappet guide plate(s)
    1. Remove the valve tappet(s).
Installation
  1. NOTE: Lubricate the valve tappet(s) with Super Premium 5W30 SAE Motor Oil XO-5W30-QSP or equivalent meeting Ford specification WSS-M2C153-G before installing.
    NOTE: Always return the valve tappet (6500) to their original bores unless they are being replaced.
    NOTE: The oil feed hole in the valve tappets must face away from the oil feed hole in the cylinder head (6049).
    NOTE: Be certain the valve tappet guide plate retainer tabs are toward the rear of the cylinder head , and the valve tappet guide plate tabs are toward the front of the cylinder head.
    To install, reverse the removal procedure.
1d27007.gif

Apr 22, 2009 | Mercury Tracer Cars & Trucks

1 Answer

Noisey tappets


8 valve engine ,intake cold 0.13 to 0.17mm hot 0.23 to 0.27 exhaust cold 0.16 to 0.20 hot 0..26 to 0.30 mm 16 valve engine (intake and exhaust) cold 0.13 to 0.17mm and hot is 0.17 to 0.21mm

Nov 22, 2008 | 1999 Suzuki Vitara

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

27 people viewed this question

Ask a Question

Usually answered in minutes!

Top Nissan Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Phil Lovisek
Phil Lovisek

Level 3 Expert

726 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Are you a Nissan Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...