Question about Honda Cars & Trucks

2 Answers

How do I connect the fuel pipes onto the petrol tank filter as it has 3 connection points on a Honda Luxline 150 1995 model

Posted by on

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Honda Master
  • 14,585 Answers

The two lines on one side of it has different size pipes. Made this way so you hook them backwards.

Posted on Jan 25, 2015

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • Honda Master
  • 43,020 Answers

Backward of how you took the old one off

Posted on Jan 25, 2015

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 1 Answer

SOURCE: toyota previa petrol smell

I had similar problem some months ago it turned out to be the pipe under wheel arch (corroded) where cap filler is.
my problem was solved by replacing pipe which is connected to rubber pipe fixed to tank and filler hose from filler cap.
tools neede llong large cross head screwdriver, small socket set ( 12 mm , 13mm , 14mm) 150 mm extension bar. to remove bracket bolts
possibly some new pipe clips as others may be corroded.
you will need to jack up car and remove wheel to gain access.
took me about 1 hr, somebody with competent DIY skills should be able to deal in couple of hrs
check with dealer as there are two different pipes on different models one is longer.
my one was the one with the piggybacked overflow pipe.
small hands are advantage
Ian

Posted on Oct 21, 2008

  • 1 Answer

SOURCE: Mazda B4000 Fuel Filter replacement

remove the bracket from around the filter, and remove the clip from the fuel line, and it should pop right off.

Posted on Dec 23, 2008

fknstart
  • 404 Answers

SOURCE: Replace fuel filter on 2004 Honda Civic

it come with a filter as one unit

Posted on Jan 06, 2009

darjr
  • 378 Answers

SOURCE: Nissan primera saloon 2002 1.8cc, petrol. Light

Locate your petrol tank, then at top of it there is a hole where you can get access to the float level switch, before you removed it you check the socket on it, maybe lose connection.

Posted on Jun 07, 2009

  • 7353 Answers

SOURCE: 1997 Honda How do I replace the fuel pump inside the fuel tank?

the tank will have to come out.

Posted on Oct 02, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

How do I remove a fuel tank from a 2004 Buick Rendezvous


First of all, there is a recall for gas tank replacement for your vehicle. The dealer will replace it free. The link will get you to the document in PDF form
Redirect Notice
It looks like there is a bracket on one end of the tank hidden by a heat shield
0601244b03-002.jpg
FUEL SUPPLY SYSTEM Fits Buick Rendezvous

Feb 08, 2015 | 2004 Buick Rendezvous

1 Answer

I have been told that my 1999 Cadillac Deville may be experiencing hesitation and rough running because the fuel filter may need to be replaced. Are there any instructions for that?


First we need to check if really fuel filter is at fault for rough running. Open the bonnet and pull out fuel pipe from the engine. Put this pipe in a clean and empty clear bottle (so that you can see the pipe) and now switch on the ignition but do not start the car, just turn it on. See the flow of fuel, if its constant then rough running is due to something else and if your fuel filter is really clogged then petrol flow will not be constant. To change the fuel filter, get under the fuel tank and locate a plastic cylindrical component with two fuel pipe connected to it. This is fuel filter. Buy a new one and replace. Make sure you check the pipes for any fuel leakage after you have connected the new fuel filter.

Aug 17, 2011 | 1999 Cadillac DeVille

1 Answer

Honda Accord 2000...how do you drain petrol tank...


Vehicle manufactures have made it extremely difficult to remove fuel from tanks. There are several ways, all not too easy. Try pick up a connection the fuel supply line either under the car or in the engine compartment and see if you can pump the fuel out of there, If the fuel pump is in the tank and has an anti siphon valves in it, this will not work. The other method then is to remove the rubber connection that connects the tank to the filler pipe and push a pipe into the tank from there.

Feb 23, 2011 | 2000 Honda Accord

1 Answer

I try to start my 1995 Cutlass Ciera and It won't start and as soon as I let off the key fuel leaks from between the tank and the drivers side rear tire. Is the fuel filter clogged and pressure is pushing...


Without having a look myself i would hazard a guess and say that teh fuel line is perished on teh rubber flexible that connects up with the fuel tank sender unit .Honestly cannot see it being a blocked fuel filter as never changed a petrol filter in 40 years .Diesel filters yes but petrol never only on old old cars with ,metal tanks have i had to clean them out and the gauze filter on the pick up pipe in the tank.

Feb 03, 2011 | 1995 Oldsmobile Cutlass Ciera

2 Answers

Where is the fuel filter on a 1991 Honda civic Si. And how do i change it?


Under the hood, by the fire wall, to remove unscrew both clamps, top and bottom, when installing new fuel filter, make sure the outlet side of the fuel filter is toward the engine.

Sep 01, 2010 | 1991 Honda Civic

1 Answer

How to Change a Fuel Pump on an 2005 Envoy XLT? Must drop the tank? Does it have access under the rear seat?


Usually there is no access under the rear seat for safety reasons.prev.gif next.gif Fuel Tank Removal & Installation 2002-2004 To Remove:
  1. Relieve the pressure in the fuel system.
  2. Lift the vehicle.
  3. Remove the frame brace from the frame.
  4. Remove the fuel tank shield from the fuel tank.
  5. Drain the fuel from the tank into an approved container.
  6. Loosen the fuel hose clamp and disconnect the hose from the fuel tank.
  7. Disconnect the evaporative emission (EVAP) vent valve and fuel tank pressure sensor connectors. Evaporative emission cansister pipes removal and installation gm-05-00-1546.gif

  8. Disconnect the evaporative emission (EVAP) vapor and vent valve pipes from the evaporative emission (EVAP) canister.
  9. Disconnect the fuel return and feed pipes from the fuel tank.
  10. To avoid system contamination, cap the evaporative emission (EVAP) and fuel pipes.
  11. Use a jack to support the fuel tank. Fuel tank removal and installation gm-05-00-1547.gif

  12. Detach the fuel tank straps from the frame.
  13. Lower the fuel tank.
  14. Disconnect the fuel sender connector.
  15. Remove the fuel tank from the vehicle.
To Install:
  1. Place the fuel tank under the vehicle.
  2. Connect the fuel sender connector.
  3. Attach the fuel tank straps to the frame. Torque the bolts to 24 ft-lb (32 Nm).
  4. Remove the caps from the evaporative emission (EVAP) and fuel pipes.
  5. Connect the evaporative emission (EVAP) vapor and vent valve pipes to the evaporative emission (EVAP) canister.
  6. Connect the evaporative emission (EVAP) vent valve and fuel tank pressure sensor connectors.
  7. Connect the fuel hose to the fuel tank. Torque the clamp to 22 in-lb (2.5 Nm).
  8. Connect the fuel return and feed pipes to the fuel tank.
  9. Lower the vehicle.
  10. Refill the fuel tank.
  11. Turn on the ignition for 2 seconds, with the engine off, and then turn off the ignition. After 10 seconds, turn the ignition back on with the engine off.
  12. Lift the vehicle.
  13. Check for leaks in the fuel lines.
  14. Install the fuel tank shield onto the fuel tank.
  15. Install the frame brace onto the frame.
  16. Lower the vehicle.
2005-2007 To Remove:
  1. Relieve the pressure in the fuel system.
  2. Lift the vehicle.
  3. Remove the frame brace from the frame.
  4. Remove the fuel tank shield from the fuel tank.
  5. Drain the fuel from the tank into an approved container. Evaporative emission cansister pipes removal and installation gm-05-00-1544.gif

  6. Disconnect the evaporative emission (EVAP) canister fresh air, solenoid, and purge pipes from the evaporative emission (EVAP) canister.
  7. Disconnect the fuel filler pipe recirculation hose from the fuel tank.
  8. Loosen the fuel fill pipe clamp and disconnect the pipe from the fuel tank.
  9. Disconnect the fuel feed and evaporative emission (EVAP) pipes from the fuel tank.
  10. To avoid system contamination, cap the pipes.
  11. Use a jack to support the fuel tank. Fuel tank removal and installation gm-05-00-1545.gif

  12. Detach the fuel tank straps from the frame.
  13. Lower the fuel tank.
  14. Disconnect the evaporative emission (EVAP) vent valve, fuel tank pressure sensor, and fuel sender connectors.
  15. Remove the fuel tank from the vehicle.
To Install:
  1. Place the fuel tank under the vehicle.
  2. Connect the evaporative emission (EVAP) vent valve, fuel tank pressure sensor, and fuel sender connectors.
  3. Lift the fuel tank.
  4. Attach the fuel tank straps to the frame. Torque the screws to 24 ft-lb (32 Nm).
  5. Remove the caps from the pipes.
  6. Connect the fuel feed and evaporative emission (EVAP) pipes to the fuel tank.
  7. Connect the fuel fill pipe to the fuel tank. Torque the clamp to 22 in-lb (2.5 Nm).
  8. Connect the fuel filler pipe recirculation hose to the fuel tank.
  9. Connect the evaporative emission (EVAP) canister fresh air, solenoid, and purge pipes to the evaporative emission (EVAP) canister.
  10. Lower the vehicle.
  11. Refill the fuel tank.
  12. Turn on the ignition for 2 seconds, with the engine off, and then turn off the ignition. After 10 seconds, turn the ignition back on with the engine off.
  13. Lift the vehicle.
  14. Check for leaks in the fuel lines.
  15. Install the fuel tank shield onto the fuel tank.
  16. Install the frame brace onto the frame.
  17. Lower the vehicle.

Jul 11, 2010 | 2005 GMC Envoy Xl

1 Answer

How do i remove gas tank


NOTE Always maintain cleanliness when servicing fuel system components.
  1. Relieve the fuel system fuel pressure.
  2. Drain the fuel tank.
  3. Raise the vehicle.
  4. Disconnect the fuel tank wiring harness connector at the body pass through.
  5. For 3.4L engines, disconnect the quick-connect fitting at the inlet side of the in-pipe fuel filter.
  6. For 3.4L engines, disconnect the quick-connect fitting on the fuel return pipe, near the fuel filter.
  7. Disconnect the fuel tank evaporative emission (EVAP) pipe quick-connect fitting near the fuel filter.
  8. Remove the fuel feed, the fuel return, and the EVAP lines from the fuel pipe retainer.
  9. Remove the retaining nut for the EVAP canister bracket.
  10. Loosen the fuel tank filler pipe hose clamp.
  11. Disconnect the fuel tank filler pipe from the fuel tank.
  12. For 3.5L engines, disconnect the EVAP vent pipe near the fill pipe hose.
    NOTE Do not bend the fuel tank straps. Bending the fuel tank straps may damage the straps.
  13. With the aid of an assistant, support the fuel tank and remove the fuel tank strap attaching bolts.
  14. Remove the fuel tank from the vehicle and place the fuel tank in a suitable work area.
  15. If the fuel tank is not being replaced, go to the Installation Procedure.
  16. Disconnect the fuel tank wiring harness from the fuel sender assembly.
  17. Remove the fuel sender shield from the fuel tank.
  18. Disconnect the fuel feed and return pipe quick-connect fittings at the fuel sender.
  19. Disconnect the EVAP vapor pipe assembly from the fuel sender.
  20. Remove the fuel and/or EVAP pipe assembly from the fuel tank.
  21. Remove the fuel sender assembly.
  22. Remove the EVAP vent solenoid valve.
  23. Remove the EVAP canister.

To install:
  1. Install the EVAP canister.
  2. Install the EVAP vent solenoid valve.
  3. Install the fuel sender assembly.
  4. Install the fuel and/or EVAP pipe assembly.
  5. Connect the EVAP vapor pipe to the fuel sender assembly.
  6. Connect the fuel feed and fuel return pipes at the fuel sender.
    NOTE Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.
  7. Install the fuel sender shield to the fuel tank and tighten the shield nuts to 53 inch lbs. (6 Nm).
  8. Connect the fuel tank wiring harness to the fuel sender assembly.
  9. With the aid of an assistant, position and support the fuel tank.
    NOTE Do not bend the fuel tank straps. Bending the fuel tank straps may damage the straps.
  10. Install the fuel tank retaining strap attaching bolts and tighten the fuel tank retaining strap bolts to 35 ft. lbs. (47 Nm).
  11. Install the EVAP canister retaining nut and tighten the retaining nut to 53 inch lbs. (6 Nm).
  12. Connect the fuel tank filler pipe to the fuel tank and tighten the fuel tank filler pipe hose clamp to 22 inch lbs. (2.5 Nm).
  13. Connect the fuel feed pipe quick-connect fitting at the inlet side of the fuel filter.
  14. Connect the fuel return pipe quick-connect fitting near the fuel filter.
  15. Connect the fuel tank EVAP pipe quick-connect fitting near the fuel filter.
  16. Connect the fuel tank wiring harness connector at the body pass-through.
  17. Lower the vehicle.
  18. Add fuel and reinstall the fuel tank filler pipe cap.
  19. Connect the negative battery cable.
  20. Inspect for fuel leaks with the following procedure:
    1. Turn ON the ignition for 2 seconds.
    2. Turn OFF the ignition for 10 seconds.
    3. Turn ON the ignition.
    4. Inspect for fuel leaks.
Thanks for using FixYa - a 4 THUMBS rating is appreciated for answering your FREE question.

Apr 15, 2010 | 2001 Pontiac Aztek

3 Answers

How to drain ford fusion fuel tank


The "MOST EFFECTIVE
" way is to REMOVE The FUEL TANK and DRAIN it By Tipping it over to Pour From FUEL INLET HOSE. Im Sure you Dont want to Here this as it Requires Much WORK . , BUT It IS The MOST EFFECTIVE Way to EMPTY The TANK.

Oct 31, 2009 | 2004 Ford Fusion

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

59 people viewed this question

Ask a Question

Usually answered in minutes!

Top Honda Experts

yadayada
yadayada

Level 3 Expert

75817 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Kevin Daniels

Level 3 Expert

1455 Answers

Are you a Honda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...