Question about Mitsubishi Cars & Trucks
Hello, I have a 2008 Mitsubishi Outlander, when it parked and locked (alarm active) if a car passes the rear of the vehicle the hazards will flash. The alarm does not activate. Could this be a pressure change affecting the system? It has rear parking sonar sensors but they should not be active with the car secured. Any ideas anyone please ?
Any chance you are close to the car when this happens? You could be seeing a security-system interaction. Outlander ES features a standard remote keyless entry system, and all models include a standard anti-theft engine immobilizer and security alarm system. Outlander Special Edition, LS and XLS models add the FAST-Key system that allows the driver to unlock the vehicle simply by having the remote in a pocket or purse and grasping the handle on either of the front doors or the tailgate. The FAST-Key system provides both convenience and security, since the driver does not need to search for a key or remote control while carrying packages, or when in a poorly lit area, for example. The system operates when the driver (carrying the remote unit) is within 27 inches of the front doors or the tailgate. While walking into that range, the system verifies the user i.d. Bioelectrical sensors are built into the door handles, and when the person carrying the remote grasps one of the handles, the door unlocks: grasping the driver's door handled unlocks only that door; grasping the front passenger door handle will unlock all four doors and the tail gate.
Posted on Dec 04, 2014
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
I press the remote control middle (BMW) botton, one time to set up the alarm, when I release the alarm, I press the one above the
BMW botton one time, this botton control driver side door too, if I want to open other three doors, I have to repress the same botton one more time.
Hope this can help .
Posted on Jul 09, 2008
now sometimes this happens to let you know that one of the doors are open
check your doors
this is the only thing i can think of altho you have most likely checked it lol
also lock the car with the key
you don't want it to get stolen
Posted on Dec 29, 2008
It means that the remote is not passing the signal to the car . The alarm has triggered because the system has detected an illegal entry. Replace the remote batteries
Posted on Jan 07, 2009
SOURCE: Tire pressure hazard light.
good afternoon and welcome to fixya.
your problem is relatively easy to fix, stop the car by a tire barn or discount tire and have them reset the tpms sensor that is located under the valve stem, it is not working properly, or it is broke, you may need to have them check them after they reset them, if the light comes back on. there is a computer inside your tire that tells you when a tire is low, if the sensor is bad they normally run between 30-100 dollars depending on where you get it at. that should fix your problem, good luck and let me know
Posted on Mar 10, 2009
somehow the car when on valet mode, go to a alarm shop , they should be able to re arm your car without to much damage to your pocket, or read your cars manual, it might inform you on how to fix the problem.
Posted on Sep 23, 2009
Tips for a great answer:
Jul 28, 2016 | Ford Cars & Trucks
Mar 01, 2016 | Cars & Trucks
Jan 10, 2016 | Mitsubishi Cars & Trucks
Dec 19, 2015 | 2001 Mitsubishi Pajero Pininfarina
Oct 01, 2013 | Mazda Cars & Trucks
Feb 19, 2013 | 2005 Mitsubishi Outlander
Jul 31, 2011 | 2005 Mitsubishi Outlander
Dec 24, 2010 | 2005 Mitsubishi Outlander
Aug 19, 2010 | 1994 Jeep Grand Cherokee
160 people viewed this question
Usually answered in minutes!