Question about Kia Cars & Trucks

2 Answers

In my Kia Cerato 2000cc, only heating of the driver seat is ok.the other sear not working. in addition to that, cooling of seats also does not work

Posted by on

Ad

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 16 Answers

Separated left and right fuse, seems to be a 30 and a 15 amp fuse.

Posted on Dec 04, 2014

Ad
  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Sergeant:

    An expert that has over 500 points.

  • Expert
  • 268 Answers

Check that the wiring harness plugs under the seats haven't become disconnected. Next thing to check is that the harnesses have power when the controls for heat/cool are activated. Also check the interior fuse compartment for blown fuses.

Posted on Dec 04, 2014

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

bschilz
  • 2049 Answers

SOURCE: Heated Drivers Seat Ford 500 2006 will not work.

It is usually one of two problems. Either the relay under the seat has failed or the heat element in the seat has failed.

If you are not electrically challenged, you can use a simple volt-ohm meter and check for continuity in the heat element. If you have continuity, the element is good, otherwise that's your problem.

If the heat element is good, you may want to take the good relay from under the passenger seat and put it on the driver's side to see if that fixes it. If so, then you have to get a new relay.

Last, but very unlikely, would be a bad switch.

Posted on Jan 10, 2010

  • 120 Answers

SOURCE: heated seats not working and

did you check the fuses? that would be the first thing to check.

Posted on Jan 10, 2009

  • 35 Answers

SOURCE: both front heated seats not working

Page 43 in the document linked to below is a wiring diagram of the heated seats in an 850. If you're lucky some wires have come loose and are hanging under the seats, if you're unlucky you might have to do some shredding of the seats in order to replace broken parts. If so there is a fairly inexpensive repair kit made specifically for this purpose, but I don't have the part number available right now. Arm yourself with a multimeter and get to it!

Good luck!

http://www.volvoclub.org.uk/tech/service/850/SystemWiringDiagrams.pdf

Posted on May 30, 2009

  • 94 Answers

SOURCE: heated and cooled seats quit working. won't work on either driver's or passanger's seats. checked the fuses and relays and they are all ok. what's wrong?

Remove fuses 10 and 11 in the underhood junction box. Leave out for 5 minutes then reinstall. If the seats start working your Zephyrs dual climate control seat module will need replaced.

Posted on Jul 03, 2009

  • 58 Answers

SOURCE: Drivers side heated seat not working what can I

check the fuse on the panel, the fuse panel are located in the driver side right by the panel,and check the wires under the seat.

Posted on Sep 15, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do you remove the back of your cover in the back of your front car seat


Visit the on-line store, know as reliable-store, they have the repair manuals. I'm sure you will get the solution of your problem.
Best Manuals

Oct 18, 2016 | 2009 Kia Cerato 1.6

1 Answer

2007 Buick Lucerne CXL: Cooled seats not working. LIghts come on, temperature adjusters work but the motors under the seats do not come on.


Air Circulation
When the heated/cool seat switch is pressed to initiate operation of the climate control seat (CCS) system, cabin air is drawn through the heated/cool ventilation module air filter, then directed through passages in the foam of the seat cushion and seat back to the seat's occupant. In order for the CCS system to operate to its optimum performance, it is crucial to have unrestricted air flow through the system. A dirty or restricted air filter, the blockage of an exhaust air duct, a misaligned heated/cool ventilation module, or incorrect foam installation of the seat cushion or seat back will all have negative effects on CCS operation.
Heated/Cool Ventilation Module
Each heated/cool seat has 2 ventilation modules, one located under the seat cushion and one located in the seat back. These modules are controlled by the climate control seat module (CCSM). Each ventilation module contains a thermo-electric device (TED), a temperature sensor, and a blower motor. The TED and temperature sensor are mounted downstream of the blower motor. Each TED consists of a circuit of positive and negative connections sandwiched between 2 ceramic plates. Each ceramic plate is equipped with copper fins for heat exchange. The air flowing past these fins is either directed as conditioned air into the seat cushion and seat back, or directed into the cabin as waste air.
A TED is essentially a solid state heat pump that is used to heat or cool the air supply to the seat cushion and seat back. When voltage is applied to a TED, one side releases energy as heat, while the opposite side absorbs energy and gets cold. When the polarity of the current flow to the TEDs is switched, the hot and cool sides of the TED reverse.
During the following climate control seat system description and operation, the TEDs, blower motors, and temperature sensors will be referenced independently even though they are all packaged together as a module.
Climate Control Seat (CCS) System
The CCS system consists of two heated/cool ventilation modules and one climate control seat module (CCSM) that controls both the driver and passenger heated/cool seats systems. The CCSM is mounted below the front passenger seat cushion. It receives power from both, battery positive voltage and ignition 3 voltage.
Once a CCS system is activated, cabin air is drawn through the seat blower motors and directed across the fins of each of the thermo-electric device (TED) located under the seat cushion and in the seat back. The air is either heated or cooled as it passes over the TEDs. This conditioned air is then directed through channels in the foam of the seat pad and through small holes in the seat cover to the occupant. Once the system is activated, the CCSM uses a set of algorithms to control the temperature of the selected heating or cooling modes.
Your best bet is to take your vehicle to a qualified repair shop an have it diagnosed .
DTC B19A4: Driver Seat Back Blower Speed Circuit High

DTC B19A8: Driver Seat Back Blower Speed Circuit Short to Ground

DTC B103D: Driver Blower Power Circuit

DTC B272E: Driver Seat Back Blower Circuit Open
DTC B19A3: Driver Seat Cushion Blower Speed Circuit High

DTC B19A7: Driver Seat Cushion Blower Speed Circuit Short to Ground

DTC B2729: Driver Seat Cushion Over Temperature
DTC B19A2: Passenger Seat Back Blower Speed Circuit High

DTC B19A6: Passenger Seat Back Blower Speed Circuit Short to Ground

DTC B111D: Passenger Blower Power Circuit

DTC B272F: Passenger Seat Back Blower Circuit Open
DTC B19A1: Passenger Seat Cushion Blower Speed Circuit High

DTC B19A5: Passenger Seat Cushion Blower Speed Circuit Short to Ground

DTC B272A: Passenger Seat Cushion Over Temperature
Driver and Passenger Heated/Cool Seats Inoperative
  1. Ignition OFF, disconnect the C1 harness connector at the CCSM.
  2. Test for less than 5 ohms between the ground circuit terminal M and ground.
  3. ?‡'
    If greater than the specified range, test the ground circuit for an open/high resistance.

  4. Verify that a test lamp illuminates between the B+ circuit terminal E and ground.
  5. ?‡'
    If the test lamp does not illuminate, test the B+ circuit for a short to ground or an open/high resistance.

  6. Disconnect the C2 harness connector at the CCSM.
  7. Ignition ON, verify that a test lamp illuminates between the ignition circuit terminal 1 and ground.
  8. ?‡'
    If the test lamp does not illuminate, test the ignition circuit for a short to ground or an open/high resistance.

  9. If all circuits test normal, replace the CCSM.


Sorry

Jul 10, 2016 | 2007 Buick Lucerne CXS Sedan

1 Answer

Kia cerato 2012 error code B1361


B1361 Driver seat belt pretensioner resistance high, replace it or check for disconnected or damaged wiring.

Jun 30, 2016 | Kia Cars & Trucks

1 Answer

2010 Lincoln MKS Heated Seat on driver's side stopped working (Light in button turns off on its' own)


The most common cause of this problem is that the drivers seat heater grid is open or burned out. That is based on 25 years as a Ford dealer technician.

Feb 27, 2017 | Lincoln Cars & Trucks

1 Answer

Kia cerato boot wont open with key or electronic fob.


Remove lock assembly and check,enter boot by reaching through back seats.

May 04, 2015 | 2006 Kia Cerato 1.6

1 Answer

In my Kia Cerato 2000cc, only heating of the driver seat is ok. The other seat not working. in addition to that, cooling of seats also does not work please help me & tel me where is it


I'm not familiar with this model of Kia since it's not sold in the United States. However, if you know of the U.S. model badging, then a Chiltons/Haynes repair manual should be the same (example: if Cerato 2000cc where you're at is the same as the Spectra here, then the Spectra repair manual should work.)

Dec 03, 2014 | Kia Cars & Trucks

1 Answer

2009 Lincoln MKS heated seats do not work


there is a heat /cool control module under the drivers seat.

Jan 25, 2013 | 2009 Lincoln MKS

2 Answers

Heated and cooled seats quit working. won't work on either driver's or passanger's seats. checked the fuses and relays and they are all ok. what's wrong?


Remove fuses 10 and 11 in the underhood junction box. Leave out for 5 minutes then reinstall. If the seats start working your Zephyrs dual climate control seat module will need replaced.

Apr 23, 2009 | 2006 Lincoln Zephyr

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

112 people viewed this question

Ask a Question

Usually answered in minutes!

Top Kia Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

yadayada
yadayada

Level 3 Expert

76164 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8273 Answers

Are you a Kia Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...