Question about Fiat Cars & Trucks

Open Question

How CAN I ISOLATE THE IMMOBILISER ON SELCA SYSTEM ON FIAT M/HOME 1995, NOT SURE HOW OLD SYSTEM IS, THE RED CONTACT FOB DOES NOT WORK, CAN'T USE M/HOME?

Posted by on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

ghost45
  • 1280 Answers

SOURCE: the key fob won't turn the immobiliser off

Check the battery in each fob -- batteries could be weak.

Posted on Oct 18, 2009

  • 4793 Answers

SOURCE: Key fob has stopped working wont turn off alam,immobiliser.

lock the car with the key and hold opver for 30 secs then press/hold unlock button on key fob for 30 secs,should reset....

Posted on Mar 21, 2010

  • 4102 Answers

SOURCE: hi,immobiliser problem?battery went flat,,managed to

Hi it sounds like you have done everything you can do, it now looks like your going to need to get the immobilizer reset, this can be done at most garages but its best if you shop around to see the best price you can get as its not cheap.

have you tried locking the door with the key and then opening it with the key then try the car see if it will work.

failing that its going to need the imob re-programming so that it accepts your key fob, it may just be that you need the fob replacing as the chip inside could have failed they will be able to test all this for you.

let me know if you need further assistance, not that theirs much more i can do without being their with the equipment to test the immobilizer, hopefully it will just be the fob that needs replacing.

you could just try one last thing when you get in the car and put the key in the ignition try holding the fob as close as you can to the ignition barrel as this is where it picks the signal up from so try holding it close to their and see if that then lets you start the car

failing that its going to be a trip to the garage.

plz rate this solution as i have a whole page of unrated posts, thanks

Posted on Aug 31, 2010

Audioaholic
  • 376 Answers

SOURCE: Neither key fob for our

all you have to do to reset the coding is hold the lock button down for a minute or two till the locks click locked. then test it again by unlocking them. if the button light flashes rapidly then the batt is low, which will affect the distance for use. (do the re-code right next to the vehicle for best results.)

Posted on Dec 31, 2010

  • 456 Answers

SOURCE: I left my car garaged

depending on the type of security system, it is sometimes necessary to re-sync the keyfob to the car after a flat battery on the car or the fob.
this is normally just a matter of turning the key to the IGN position and pressing the button on the key fob. you may have to hold the button for a second or two but this will normally re-sync the system.

if it does not work then you will have to sent more detailed information on the security system. ie factory fitted or aftermarket system with make and type (normally found on the siren unit under the bonnet.

hope this helps

Posted on Mar 14, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do I program a touch key


sorry but usually done by a dealer

Mar 04, 2015 | Fiat Cars & Trucks

2 Answers

Fob still won't work after new battery and nothing wrong with the contact inside, do not hae original code for the Kia sportage 1998 so what is the next best thing ,to do?


When replacing the key fob battery there is no reprogramming required! If the key fob was working prior to the battery replacement then it would point to the contacts not being correct! Remove key fob battery and start again!

Dec 31, 2014 | 1998 Kia Sportage

1 Answer

I have toyota camry 1995 with toyota security light on the dashboard.I have toyota fitted security features but with the light on i cannot start the engine as it immobilises.I have no remote key or unit in...


there maybe a fault with the drivers door. if it used to be able to start before without the fob. then there would be a fault with the lock. only other way is to get the pass code from toyota but they may not have it as it is a 1995. the only other way is to have the immobiliser sent off to a company that can retrieve the code from the unit and make a new fob for it. can cost a lot. but if you change anything you still need the pass code unless you get another ecu immobiliser alarm and fob from another car. then it should all work then. but make sure it is a set.

Sep 28, 2013 | 1995 Toyota Camry

1 Answer

Saab 9000 immobiliser wont disengage


Cheers guys but it's not a key fob, it's a weird torpedo shaped device you press directly onto a small metal disc beneath the immobiliser light. It's an old L reg Saab 9000. Any ideas?

Jan 28, 2013 | Saab 9000 Cars & Trucks

1 Answer

I have a 05 plate coupe 2ltr se, can't turn immobiliser/alarm off with fobs, both fobs have new batteries and have ben sync'ed with car as per handbook, could it be a fault with body unit


This is a long shot but worth trying as it is free:

Disconnect both leads from the battery, contact the two removed leads together (this will diffuse the ECU memory and re-boot the system)
leave for a few minutes then reconnect.
(The above can lose a radio code if applicable)

This can reconfiger the systems and sort out a multitude of issues.

Hope it sorts it out for you.

Feb 16, 2012 | Cars & Trucks

1 Answer

My FOB got wet is not working, now i cannot open the door without the alarm going off... i need help


The FOB has got an immobiliser circuit built in. It looks like some water has got in.

It may not work but what I'd try is this. Open the FOB, take out the battery (Small silver disk) put the FOB somewhere warm to dry out thoroughly. (At least 24 hours) Now I'd go and get a new battery while this is going on. Once dry, re-assemble with the new battery.

After trying this, I'd be going to a professional or contacting Isusu for help myself.

Sep 12, 2011 | 1999 Isuzu Trooper

1 Answer

I left my car garaged over the very cold winter. When I eventually tried to start the vehicle the infra red key fob would not open the central locking to disarm the immobiliser. There was also no power...


depending on the type of security system, it is sometimes necessary to re-sync the keyfob to the car after a flat battery on the car or the fob.
this is normally just a matter of turning the key to the IGN position and pressing the button on the key fob. you may have to hold the button for a second or two but this will normally re-sync the system.

if it does not work then you will have to sent more detailed information on the security system. ie factory fitted or aftermarket system with make and type (normally found on the siren unit under the bonnet.

hope this helps

Mar 14, 2011 | Honda Prelude Cars & Trucks

1 Answer

Key fob would not open 1995 discovery ,used key in door then alarm went off ,after a few seconds alarm ceased then put key in to start engine and got nothing now cant lock doors with key but red light is...


The red light means the Immobiliser has not been turned off, the deactivator in the key must not be working correctly, visit your local land rover dealer who will be able to make sure the key is paired to the car correctly, otherwise you may need a new key.

Feb 11, 2011 | 1995 Land Rover Discovery

1 Answer

Key fob has stopped working wont turn off alam,immobiliser.


lock the car with the key and hold opver for 30 secs then press/hold unlock button on key fob for 30 secs,should reset....

Mar 21, 2010 | 1995 Saab 900

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

35 people viewed this question

Ask a Question

Usually answered in minutes!

Top Fiat Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22133 Answers

yadayada
yadayada

Level 3 Expert

75807 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Fiat Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...