Question about 2014 Mitsubishi Outlander

1 Answer

Had a diagnosis done on my mitsubishi outlander.suction control valve changed..but still coming up with same fault.do i need to change the sensor.

Car goes into limp mode when idling at traffic lights then having to turn of ignition to reset.

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

  • Expert
  • 179 Answers

If you had work done and it still is not fixed, you need to go back to the place that did the work and complain. A car this new should be under some kind of warranty.

Posted on Dec 03, 2014

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya Mechanic can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Mechanic (only for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2003 mitsubishi outlander rough idle won't stay on and wont run with load


p0134 - Bad O2 Sensor or faulty sensor wiring

p0132 - Bad O2 sensor (Bank 1 Sensor 1)

p0401 - Exhaust Gas Recirculation insufficient

p0113 - Defective intake air temperature sensor/ clogged air filter/ faulty Mass Air Flow (MAF) sensor.

p0101 - Vacuum leak/ defective MAF sensor/ damaged intake manifold gasket

p0107 - Faulty Barometric Pressure sensor or its wiring system

p0758 - Low transmission fluid/ Dirty transmission fluid/ Shift Solenoid B wiring problem or its valve

p0753 - Low transmission fluid/ Dirty transmission fluid/ Shift Solenoid A wiring problem or its valve

p0736 - Transmission problem/ Low transmission fluid/ Dirty transmission fluid/ Shift Solenoid wiring problem or its valve/ Transmission hydraulic control circuit

p0735 - Transmission problem/ Low transmission fluid/ Dirty transmission fluid/ Shift Solenoid wiring problem or its valve/ Transmission hydraulic control circuit

p0732 - Transmission problem/ Low transmission fluid/ Dirty transmission fluid/ Shift Solenoid wiring problem or its valve/ Transmission hydraulic control circuit

p0720 - Damaged speed sensor/ its harness/ connector

Jun 12, 2013 | 2003 Mitsubishi Outlander

1 Answer

P0488 fault code on a 2008 outlander


just had this on my 2007 2.0 did outlander, replaced the egr throttle body which cleared fault code p0487 which i also had, but p0488 was a little more tricky to find out what it was, after searching the internet i checked the fuses, sure enough a 15a fuse had blown, about 6th from the right as you look at the fuse box with an engine symbol identifyng it. changed the fuse cleared the fault code job done, it seems a broken egr throttle body will blow this fuse according to my research. hope this helps someone.

Jul 10, 2012 | Mitsubishi Cars & Trucks

1 Answer

ABS show needs service


A fault has been detected. The best way to find out what it is would be to hook up a shop scanner. It may just be soemthing simple like a wheel sensor but a scanner would show the data that all the sensors are putting out and comparisons and test can be done.

Sep 27, 2011 | 2009 Mitsubishi Outlander

2 Answers

P 2138 code with service engine soon light on?


Accelerator Pedal Position Error.

P2138 - Accelerator Pedal Position Sensor Circuit Range / Performance Problem

Clear the code - if it recurs, change the sensor.


Thanks for using FixYa - a 4 THUMBS rating is appreciated for answering your FREE question.

Sep 15, 2010 | 2006 Nissan Altima

2 Answers

How important is it to change the timing belt on a 2003 Mitsubishi Outlander every 100 000KM ?


it is very important, if the belt fails it will severly damage the engines valves and this repair will cost $1000's

Jul 30, 2010 | 2003 Mitsubishi Outlander

1 Answer

2004 Outlander ngine warning light comes on but performance is not affected


There are many issues that can cause the light to come on without immediately affecting performance, anything from a leaking fuel cap seal to an evap purge solenoid sticking. You will need to access the trouble codes and go from there with diagnosis.

Nov 18, 2009 | 2005 Mitsubishi Outlander

3 Answers

How do you reset change oil light on mitsubishi outlander


Turn the key off.

Press the "Info" button on the left of the dash cluster until your maintenance miles/months screen is displayed.

Press and hold the "info" button until the maintenance screen begins flashing.

Release the "info" button and then push and hold it it for one second.

Your Maintenance intervals should reset to +6 months and +7500 miles since the last interval amount.

Note that if you have not reset it for more than one interval, you may need to do it more than once. If you have not done it for many intervals, you may need to have it reset with the scantool at a dealer, as I have run into a handful of vehicles that the oil change reminder locked up after 3-4 "intervals" were skipped/not reset.


Sep 11, 2009 | 2007 Mitsubishi Outlander XLS

Not finding what you are looking for?
2014 Mitsubishi Outlander Logo

101 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mitsubishi Experts

yadayada
yadayada

Level 3 Expert

77186 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22265 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8737 Answers

Are you a Mitsubishi Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...