Question about 2005 Ford Bantam 1.3i

3 Answers

When I drive with speed of 100 this car twist at back.what could be the problem?

Alignment is fine

Posted by on

Ad

3 Answers

  • Level 1:

    An expert who has achieved level 1.

    Habit-Forming:

    Visited the website for 3 consecutive days.

    Welcome Back:

    Visited the website for 2 consecutive days.

  • Contributor
  • 2 Answers

Check the rear hub nuts one is loose

Posted on Oct 11, 2015

  • PM MASINA Oct 11, 2015

    Check the rear hub nuts one is loose

×

Ad
  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that has over 10 points.

  • Expert
  • 38 Answers

2005 Ford Bantam 1.3i WEBSITE
HAVE DEALER LOOK FOR RECALLS ON SUSPENSION OR ISSUE YOU HAVE.
http://www.checkthatcar.com/car_data.asp?make=Ford&model=Bantam%201.3i

FROM THE CHECK SUSPENSION PAGE.
http://www.checkthatcar.com/suspension.asp

Posted on Dec 11, 2014

Ad
  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Master:

    An expert who has achieved Level 3.

  • Master
  • 550 Answers

There are 3 Adjustments for front allinement
Camber Castor and toe in
get them checked .

Posted on Dec 11, 2014

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Loss Control while on curves


Slow down everything has limit.

Feb 24, 2013 | 2007 Toyota Corolla

2 Answers

I have a 2000 Toyota Tundra - front end shimmys at speeds over 55 mph or braking at high speeds - could it be front tires need to be rebalanced, or front end realigned?


new tyres needed would be more the cause as they do deform with the sun in hotter climes ,and no doubt they are twisted if you look carefully

Aug 24, 2011 | 2000 Toyota Tundra

1 Answer

My navigator is downshifting and the speed odemeter is off


Recommend checking the connection to the speed sensor on the transmission. If connection is loose, tighten and test drive. If this doesn't help or the connection was not loose, replace the sensor.
The sensor looks like the picture below and is installed with a single bolt. To replace, just remove the cable and bolt and pull out.
To install, rub some oil on the o-ring and push in while twisting. Note that the square end that goes inside the tranny must align with and slip into the square speed gear inside.
let me know if you have any questions.

jturcotte_31.jpg

Nov 26, 2010 | 2001 Lincoln Navigator

1 Answer

Speedometer problem


Is this electric or cable operated? if cable, it could be a faulty cable......they go bad with age.

Jul 16, 2009 | 1996 Buick LeSabre

1 Answer

My car wonders at high speeds


I would FIRST check tire pressures. Make sure they are set to the factory specs. Road test, if problem STILL persists, a wheel alignment would be advised. Hope this helps

May 07, 2009 | Ford Fusion Cars & Trucks

1 Answer

Problem with vibration feel it when driving


any way you feel vibrations travel in whicth speed?
if it is up then 90-100 kmh get your tires balanced ,(they put a piece of metal in them to not vibrate in high speed) if you have done this, see how is your alignment tires. if this have done see your arm steering , you have them problematic(losting fluid inside, or if you have hited something hard with your tires.

Apr 07, 2009 | Mercedes-Benz C55 Cars & Trucks

1 Answer

1999 jeep grand cherokee will not shift into over drive.


change the Speed sensor on the transmition.  On my 99 it would not shift out of first gera when my gas light would turn on. Every time it happened untill i filled it up . I changer the speed sensor  and all is fine

Apr 05, 2009 | 1999 Jeep Grand Cherokee

1 Answer

Volvo S60 AWD 2.5- car pulls sideways when driving on rain or sno


It's probably not that the wheels are moving at a different speed. It sounds like a simple alignment issue to me. Installing a bearing could have thrown it off. You should just have a simple alignment job done.

Jan 08, 2009 | 2002 Volvo S60

Not finding what you are looking for?
2005 Ford Bantam 1.3i Logo

Related Topics:

198 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

fordexpert

Level 3 Expert

5546 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...