Question about 2004 Ford Freestar

1 Answer

DOORS DONT CLOSE TIGHT HEAR ROAD NOISE

Cleaning terminals

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Sergeant:

    An expert that has over 500 points.

  • Expert
  • 233 Answers

While it is not common for a vehicle of that age, it is possible the rubber seals around the doors are aged enough to allow small amounts of air and noise to enter. If you can see physically the door isn't closed fully, check the closing points for lubrication as in 10 yrs the lubrication can collect rain, dust, silt, etc causing it not to function as it once did. Often times you may need to use a silicon spray to help remove the old lubrication and apply fresh. Silicon spray by itself will not provide proper lubrication for long. A local auto parts store should be able to recommend something for this. I most often use marine bearing grease as it stands up better to moisture.

Posted on Dec 03, 2014

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

90 eagle summit won't start and there's clicking noise coming from bottom center dash


If it doesn't turn over and it clicks then it's the starter.

Jul 20, 2014 | Cars & Trucks

1 Answer

Honda Civic 1999 Dome light wont turn off when doors are closed


see the diagram and fix it. God bless you
use the VOM, tight and clean every plug or connector, and clean it . DISCONNECT THE + SIDE OF BATTERY.

10_16_2012_5_50_45_am.gif

Oct 16, 2012 | 1999 Honda Civic

1 Answer

Will not start, have replaced battery, Starter, sounds like starter is not engaging.


Does the vehicle crank over? or does it make a grinding sound like the gear isn't contacting. If your hearing a grinding noise chances are the flex plate are missing teeth that the starter engages. Only way to replace that is to remove transmission. If your hearing a clicking noise check to make sure the battery connections are tight and the terminals are clean.

Mar 18, 2011 | Dodge Dakota Cars & Trucks

1 Answer

1999 honda passport (isuzu rodeo), problem: All lights (dash,dome,headlights,....) pulsate dim bright, dim bright. Had altanator checked was ok. removed battery terminals while running and didnot die....


I have the same car and the same problems. I think it may be a ground issue. Once the weather is a bit warmer, I will be checking the different connections. Does anyone else have any ideas.

Dec 27, 2009 | 1999 Isuzu Rodeo

1 Answer

Car make spinning noise after warm up.


Check tightness of your belts also check your water pump for a leak or damage.

Sep 07, 2009 | 1996 Cadillac Seville CA Value

1 Answer

1995 jimmy dont start


Hi,
HA! I can't hear the actual sound but you did pretty good! So the engine isn't turning over at all?
If so, what I would do, is disconnect the battery and clean the battery terminals and cables. You may just have a weak battery connection. Hope it's a quick fix...
Good luck!

Aug 27, 2009 | 1995 GMC Jimmy

3 Answers

The battery is new. 93 4runner. Turn Key, everything works, turn the key to start, hear the click and then nothing. No clock, no lights, on horn, nothing, as if the battery were disconnected. Jiggle wire...


Check the tremianls on the battery. also follow your ground cable to where it is attached to the frame, motor or body. if the cables are in good shape, cut off the old terminals and replace them with new ones from the parts store. They are only a couple of dollars each.

Aug 15, 2009 | 1993 Toyota 4Runner

Not finding what you are looking for?
2004 Ford Freestar Logo

53 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

75744 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

fordexpert

Level 3 Expert

5495 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...