Question about 2010 Hyundai Elantra Blue
The only way I am able to get the door locks and alarm system to work again is by putting the key back into the ignition and turning it towards start and then take it out again. After I do that everything works fine.
Sounds like a programing problem. Most car accessories are controlled by a pcm or bcm (powertrain control module) or Body control module).. You call it the car computer. Sometimes a spike in voltage or some other abnormality can cause a glitch. Take it to the dealership and have them run a diagnostic and reflash the module.
Posted on Dec 03, 2014
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
there is a short or a signal from the un-locking switch that is triggering your locks.
you have a switch manually to lock and un-lock your doors, the unlocking circuit is making contact.
you can try playing with your switch to un-short the switch or open it up ang check it.
tnx 4 using fixya,
Posted on Sep 26, 2008
wellits a smilple thing they have this round wire with a handel and they will yake the strip of ur driver side window don't worry it can be put back no need to buy a new one . and he will push the wire that is connecting both the handels and then open ur door.
Posted on Oct 22, 2008
SOURCE: alarm problem on my 2001 elantra
This alarm system can only be 'disarmed' using the keyless remote programmed for this specific vehicle. Press the "Unlock" button on the keyless remote -- this resets/disarms the alarm system. If you do not have keyless remote for this vehicle, get one and have it programmed at a Hyundai Service Center. Problem solved.
Posted on Jun 06, 2009
check your key see if its not damaged ok also press the break move the steering wheel slowly and move the key as you are moveing the steering wheel
Posted on Jan 11, 2010
The solution is to pull out the back seat to get into the trunk. There are two bolts holding the bottom part of back seat (bolts located between bottom and top sections). Then pull out bottom section of back seat and you see the hinge for the top section, remove the bolts and then you can lift up and access the trunk. It's not that hard.
Posted on May 29, 2011
Tips for a great answer:
Jan 04, 2016 | Hyundai Cars & Trucks
Jan 13, 2015 | 2010 Hyundai Elantra
Apr 25, 2014 | 2010 Hyundai i30 1.4
Same thing happened with mine. It turned out that the
power door lock motor went out. Since the handle or the switch can unlock the
driver's door, both of these mechanisms are connected. When the door lock motor
goes out it freezes in whatever position, it was last engaged.
Nov 06, 2010 | Hyundai Motor 2002 Elantra
Jun 06, 2010 | Hyundai Motor 2003 Elantra
Mar 01, 2010 | 2001 Hyundai Elantra
Jun 23, 2009 | 2007 Hyundai Elantra Limited Sedan
Dec 19, 2008 | 2004 Hyundai Elantra
130 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: