Question about Cars & Trucks

2 Answers

We changed the light bulb but the light will not come on is there a fuse box

Posted by on

Ad

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Cars & Trucks Master
  • 14,585 Answers

Depending on the light. Pull the bulb back out and look at the tabs in the plug. Could be 2 or 4 of them. If the y are still there, bend them out some. This will make them contact the bulb. If they aren't there. get another socket for the bulb. If they are there and still nothing, replace the socket. The wires break usually by the socket.

Posted on Dec 03, 2014

Ad
  • Level 1:

    An expert who has achieved level 1.

    MVP:

    An expert that got 5 achievements.

    Habit-Forming:

    Visited the website for 3 consecutive days.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Contributor
  • 34 Answers

Not enough info in question. What type of car, year, model???
Most cars do have a fuse box...check the user manual

Posted on Dec 03, 2014

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya Mechanic can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Mechanic (only for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I need to know what no fuse i change for my back brake light on a rover 75 saloon


there is no specific fuse for the brake lights, the lights are controlled by the lamp control monule recheck the bulbs/holders and wiring. the relevant fuses for the control module which you can check are, no.9 and 11 in the engine bay fuse box and fuse 40 in the passenger compartment fuse box.

Feb 12, 2015 | Rover Cars & Trucks

2 Answers

2004 Toyota Highlander, have no tail-lights, all other lights work ?


With the car jacked up and on safety stands, follow the wiring harness from the taillights to the front of the car. The wire is probably pinched, burned or shorted somewhere along the way. Did you have any work done on the bottom chassis area recently? Does sound like a pinched wire.

Sep 12, 2014 | 2004 Toyota Highlander

1 Answer

Dome light bulb replace


There sometime is 2 fuse boxes on cars, one under the hood, and one inside the car somewhere. Check both boxes, make sure all the fuses are not blown, then if everything is good try replacing the switch in the door and/or on the dome light itself.

Dec 02, 2013 | 2000 Chevrolet Prizm

1 Answer

Brake light does not go on, fuse ok new bulbs stil no brake light when brakes are applied


check both fuse boxs if ok check the break light switch on stearing colum may be unpluged or bad

Jan 29, 2012 | 2000 GMC Sierra

2 Answers

Tail lights do not work all lights work but the back lights do not work. I change the fuse but lights still don't come on. all the other lights work is there other fuses i need to replace


if the bulbs are ok! check bulb socket to see if you have power.with test light, if not make sure sockets are clean. check the bulbs first, because they are a double filiment bulb. for brakes and tail lights. did you change the correct fuse!! it is located in interior fuse box on drivers side end of dash. its on bottom left side of fuse box. its labled "stp lps". hope this helps,

Aug 13, 2010 | 2000 Chevrolet Malibu

2 Answers

2002 Isuzu axiom cluster lights and tail lights out


Don't try a higher fuse , it just makes things worse by adding extra burn to the problem.. First make a test lamp with a 21w bulb ( indicator size) .You now have a bulb with two wires attached , insert the "test bulb" across where the fuse should be.
When you switch on the circuit concerned it will glow BRIGHT as it is getting a POS (+) and a NEG (-) ie blowing the fuse (short circuit) in the fuse box and therefore a BRIGHT bulb.
As you disconnect and eliminate or disturb the problem the bulb will immediately glow DULL ( in series contact now) and no longer a short circuit . As you check the circuits the illumination will change and, your on the money ! Let's know how you get on , Good luck

Mar 05, 2010 | 2002 Isuzu Axiom

2 Answers

Tail lights don't turn on, but brake lights work


two fuses one for each side of the car ,it uses a combined stop and tail light bulb ,so change the bulbs or test them

Jan 08, 2010 | 2001 Volkswagen Golf

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

30 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

77202 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22265 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...