Question about Cars & Trucks
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
One suggestion. Have you checked the fuses ?
I would check the AC or blower fuse to start with. If you have the drivers manual it will show you where the fuse box is. Typically there are at least two boxes to check. One in the Engine compartment and one in the passenger cabin.
Look inside the lid of the fuse box to see which fuse may apply to the AC circuits or the blower and check to see if they are blow. the metal link between the two posts that plug in. If the link is missing you need to replace the fuse with one of the same rating. Make sure you know where you took the fuse out from and put it back in the same slot if its good. Check all the main fuses if possible to see if any have blown and replace if they have.
Posted on Aug 12, 2008
SOURCE: The heater / ac blower
It is the blower resister. I purchasted one at auto zone for $18.00. It is located under the passenger side dash. You need to remove the glove box and the plastic cover under the dash to expose the blower motor. the blower motor resister is right next to the motor. Simply unplug the resister remove the two screws and replace. I did this and now my fan works on all speeds.
Posted on Sep 17, 2008
its the fuse inside the fusebox under the hood. the box is right in front of the battery. I had the same problem. 4 dollar part. look it up in the owners manuel and your good to go.
Posted on Mar 29, 2009
Its actually not that bad to change. If you open the glove box and remove the screws then the screws along the bottom of the glove box at the bottom of the dash the box will slide out. Remember to disconnect the light if it has one. Now you will be able to see the underside of the dash. You can see a large black box that has wires and vacuum lines all over. You need to locate a small flat plate with two screws and a plug in the middle. Disconnect the plug and remove the screws. The resistor will come straight out. The back side will look like small coiled up springs of different sizes. Install in reverse.Hope this helps. Good luck. Please re-post with updates. Thanks cj2176.
Posted on Jul 13, 2009
replace restor open glove box uplug 4 wire plug and two wire plug put 12 volts two wire plug to mke sure fan works if it does replace restor
Posted on Dec 27, 2009
Tips for a great answer:
Sep 30, 2016 | 2008 Nissan Sentra 2.0
Apr 04, 2015 | 2007 Nissan Sentra
Sep 12, 2014 | 2002 Nissan Sentra
Jun 05, 2014 | 2003 Toyota Corolla
Mar 22, 2011 | 2005 Nissan Sentra
Dec 28, 2009 | 2002 Nissan Sentra
Jun 18, 2009 | 1983 Nissan Sentra
Apr 09, 2009 | 1996 Nissan Sentra
Mar 15, 2009 | 1983 Chevrolet Suburban
23 people viewed this question
Usually answered in minutes!