Question about 2000 Ford Expedition

4 Answers

The drivers side window fell off its track and now I can't open the door from the inside...any pictures that I could see to put it back together the right way?

I've pulled the door apart and put the window back in the track.

Posted by on

Ad

4 Answers

  • Level 1:

    An expert who has achieved level 1.

    MVP:

    An expert that got 5 achievements.

    Night Owl:

    An expert who has answered 10 or more questions between 12 midnight and 6am on the same day.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Contributor
  • 27 Answers

Chances are that it either broke connection to handle which is fairly easy or broke plastic clip into the latch

Posted on Dec 03, 2014

Ad
  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 7 Answers

The bad news is your going to have to take off the door panel and see what you have going on inside the door ! more than likely it either knock one of the rods or clips to the handle off or bent the rod to the handle ! Good Luck and Merry X-Mas !!

Posted on Dec 20, 2014

Ad
  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Cheetah:

    An expert who has answered 20 or more questions within one hour.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 87 Answers

Most common is the plastic clip has broken. look for a loose rod floating behind where you cant see it

Posted on Dec 03, 2014

There are window channels-- the glass sides in

There is a window regulator

No window tracks to fall off of

You don't not see what is broken in there,
the window regulator ?

Posted on Dec 03, 2014

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya Mechanic can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Mechanic (only for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Drivers window fell off the track. how do I put it back?


just remove the door card/panel , lower the regulator/winder and manipulate it back into position then secure it.
You may want to investigate why it came off.
h

Jun 14, 2015 | 2009 Cadillac CTS

1 Answer

How do I put the driver side power window back on track and the door panel for my 2003 Nissan Altima 3.5SE?


R/R the inner door panel, slide the window back on track, reconnect the window transmission to the window, (or reinstall the trans) bolt everything back together (window motor, window trans to door etc.) Make sure the window is in the UP position. use the switch to raise the window & keep it up if all is back together before finally installing the door panel ( make sure the switch & other plugs are plugged in before the door panel is reinstalled.) Lights etc. Good luck

Sep 14, 2014 | 2003 Nissan Altima

1 Answer

What do i do if the window falls into the door and off track


pull door panel of and pull the window up ask some one to help u to hold it then raise up and down your track and slide window on ,then tighten up the bolts that holds it on track but make sur before you completly tighten the bolts to c if it properly set where the door can open and shut then tighten bolts on the rail and put the door panel back on : )

Jan 17, 2013 | 1997 Ford Expedition

1 Answer

Passenger side window came off trac and is sitting in door


you have to remove the door panel..unbolt the tracking from inside the door..slide the windows back inside the track rails....push window all the way up..tape the window so that id does not fall back down or have someone hold window up while you rebolt the track to the door.replace door panel....the tracks move over time and that it why the window fell.

Jan 26, 2011 | 2004 Cadillac Deville

1 Answer

The drivers side window just fell, but i can still hear the motor turn when i push the button....what happened and how do i fix it??


Your window came off the track. You need to take the door panel off the inside of the door. Once you get the panel off you will see how the window operates and the track that it sits inside normally. I suggest purchasing a repair manual. A repair manual for your specific vehicle will have pictures to aid you and will boost your confidence to attempt the fix yourself. Remember, something made your window come out of the track. You'll have to figure that out before you bother putting everything back in place. A lot of those parts are made of plastic and become brittle. Good Luck

Mar 24, 2010 | Mercury Cougar Cars & Trucks

2 Answers

Driver side window falls down it is a power window


Window has come off track,try to lube the track, reset the window in the track an use a apoxy glue let it sit for a few hours an it should b fine that's what I did to mine, that last snow storm we had my truck was covered,I was keying my truck warm up I went to open the window it was stuck, so I gave it a little hit an then it fell in the door an the snow came in lol, then I found out what to do I never had a prob again

Jan 02, 2010 | 2001 Ford Expedition

1 Answer

I have a PT Cruiser 4dr. and the rear driver side window just went down on its own. I tried to put it back up but its non-responsive to the dashboard control. All the other windows work. What's going on?


sounds like it fell off track,,,,,but try this quick go to that door and open sit inside and have key on hit button and @ same time just pound with fist middle of door,, see if you have movement ,, but if you do dont stop it till it is closed ,, go to shop

Nov 20, 2009 | 2004 Chrysler PT Cruiser

1 Answer

Window off track driver side 1997 sebring


You'll need to remove screws that are by the door handle, arm rest, under door and side of door and then gently pull back on the panel as there will also be retaining clips attached and you don't want to break them. If needed, you can pull back the weather seal (can't reuse it, but it's not that important) and you will be able to access everything inside the door

Mar 23, 2009 | 1997 Chrysler Sebring

1 Answer

REMOVING A DOOR PANEL


You'll need to remove screws that are by the door handle, arm rest, under door and side of door and then gently pull back on the panel as there will also be retaining clips attached and you don't want to break them. You'll need to lift the door panel upwards in order to get it off the window ledge. If needed, you can pull back the weather seal (can't reuse it, but it's not that important) and you will be able to access everything inside the door

Oct 02, 2008 | 2002 Buick Rendezvous

Not finding what you are looking for?
2000 Ford Expedition Logo

201 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

77201 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22265 Answers

fordexpert

Level 3 Expert

5579 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...