Question about 2000 Toyota Tundra

1 Answer

What are torque values and sequence for 2000 toyota 4.7litre cyl heads

Posted by on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 6 Answers

what are torque values and sequence for 2000 toyot - 0996b43f802082ae.jpg
These are torque to yield bolts so I believe that you will need to use new bolts. Make sure that you run a tap into the holes to clean them out or you won't get an accurate torque reading. You also start from the inside bolts and work your way out. Torque in the above sequence to 24 ft/lbs and then following the same sequence turn the bolt 90 degrees. Once this is done follow the same sequence and turn the bolt another 90 degrees. This will put you at 180 degrees from the initial 24 ft/lb position.
Jim

Posted on Dec 03, 2014

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get to try the service completely Free afterwhich it costs $6 per call and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

What is the torque value


Here are the torque specs you requested:
MAIN BRG CAPS= 29FT/LBS THEN TIGHTEN AN ADDITIONAL 90 DEGREES in sequence(two step process)
ROD BEARING CAPS= 18 FT/LBS
CYLINDER HEAD BOLTS= 29FT/LBS + 90 degrees + another 90 degrees in sequence from the center out ward, (3 step process).
Please let me know if you have any questions.

Always happy to help.

Aug 22, 2015 | 2006 Toyota Hilux 2.0

1 Answer

I require the cylinder head attach bolts tightening sequence and torque values for a 1993 2.0 I 4 cylinder toyota camry situated in south africa


go on line to google-type in Toyota camry bolt tensions and specifications and there should be a pdf sheet with that information.

Dec 30, 2014 | Toyota Cars & Trucks

1 Answer

What is head bolt and torque sequence for 2000 Toyota tundra 4.7litre head bolts bought head gasket set for Toyota tundra 2000 4.7l from fel pro but can


Your shop manual should contain this info. Are you really doing this job without one? Bet a google search will find this info too.

Dec 02, 2014 | 2000 Toyota Tundra

1 Answer

I need how much torque the head bolts for toyota camry 1996


It is 36 ft-lb, but done in two stages to a prescribed sequence.The bolts should be oiled. See here p67

http://www.turboninjas.com/camry/eg1.pdf


This is for the 4-cyl. The V6 is 40 ft-lb, and the link is .....eg2.pdf.

Aug 13, 2012 | 1996 Toyota Camry

1 Answer

1994 ford tempo 4 cyl need to know tourqe and order of head bolts 10 total ,thanks


Torque sequence ------------ front ' 10 6 2 3 7 ' of ' ' engine ' 9 5 1 4 8 ' ------------ Step 1: torque in sequence to 52-59 Ft/Lbs Step 2: torque in sequence to 70-76 Ft/Lbs Recheck final torque in sequence
Hope it helps you.

Jul 30, 2011 | 1993 Ford Tempo

1 Answer

I WANT TO HAVE CYLINDER HEAD TIGHTENING TORQUE AND SEQUENCES :1. CYLINDER HEAD 2.MAIN BEARING 3.CONNECTING ROD 4.FLYWHEEL 5.PULLEY


Go to a auto parts store (Pep Boys, Auto Zone, Advance, O'Reilly's, etc. ...they all have vehicle specific manuals for sale that will have a section on torque values.

Dec 26, 2010 | 1995 Toyota Pickup

3 Answers

Need to know the head bolts torch specs on 98 toyota v6


heres the torque specs and the way to tighten the head bolts for your 1998 toyota sienna, hope this helps,
12 point bolts step 1- 40 ft lbs
step 2- additional 90 degrees
recessed bolt 13 ftlbsaf151d2.gif

May 12, 2010 | 1998 Toyota Sienna

1 Answer

1994 4runner, six cyl. putting rebuilt heads on, toyota head gaskets, new head bolts "tvs 10.9". Torqued bolts in pattern to 33 foot pounds. another 1/4 turn in the pattern. and into my next and final 1/4...


REMOVE 3 BOLTS MAKE SURE YOU HAVE THE RIGHT THREADS.IF BOLTS LOOK OKAY.YOUR BOLTS HOLES HAS DEBRIS OR OIL AND ANTIFREEZE IN THEM.OR YOUR BOLT HOLES IS STRIPPED.YOU HAVE TO REMOVE HEAD TO FIX THE THREAD PROBLEM.IF YOU HAVE NOT MADE THE FINAL TORQUE TO CRUSH AND SEAL HEAD GASKET THE. HEAD GASKET PROBABLY ALRIGHT.YOU HAVE TO LOOSEN HEAD BOLTS IN SEQUENCE BACK OFF A LITTLE AT EACH BOLTS.IF HEAD GASKET LOOK DAMAGE AT BOLT HOLES REPLACE HEAD GASKET.

Nov 13, 2009 | Toyota 4Runner Cars & Trucks

1 Answer

What is the torque pressure for a 01 daewoo matiz 800cc head


2001 daewoo matiz 800cc

This is the best info I have.

Just as important as the torque values is the tightening sequence. Since modern engine heads are soft alloys this is key. The bolts are tighten down maybe half the final value on the first pass and then tighten down fully on the final pass.
The Sequence is; 7 1 3 5 8 4 2 6 bolts 5&6 are the flywheel side of the engine Torque values Stage 1. 40-45Nm first pass Stage 2. 85-90Nm. second pass

Since you have the head removed look for carbon build up on the pistons.
You may want to get a car service manual from the library or on the internet.

May 11, 2009 | 2000 Daewoo Lanos

3 Answers

Hi I'm looking for cylinder head torque settings for a 1992 BMW 316/318 e36


BMW cylinder torque setting all models

According to my service manual as follows.

Cyl head to engine block (torx e12 M10 bolts)

Stage 1 30nm (22 ft – lb)
Stage 2 + 90 degrees
Stage 3 + 90 degrees

Cyl head to lower timing chain cover 10nm (89in – lb)

The tightening sequence is from inside to outside crossover as normal. Loosening sequence is from outside to inside crossover. Remember to set torque wrench at low setting and work gradually up through the whole sequence until you get the desired torque.

Jun 16, 2008 | 1992 BMW 3 Series

Not finding what you are looking for?
2000 Toyota Tundra Logo

89 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts

yadayada
yadayada

Level 3 Expert

76649 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8522 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...