Question about 2000 Toyota Tundra

1 Answer

What are the torque settings and sequence for toyoya4.7lcylheads

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

    Night Owl:

    An expert who has answered 10 or more questions between 12 midnight and 6am on the same day.

  • Expert
  • 107 Answers

My advice is that you purchase a quality repair manual as that most modern manufacturers have very specific procedures for removing and installing cylinder heads. Disregarding those procedures can damage the head and possibly the block itself. Not to mention leading to repeat failures and I'm guessing you don't want to repeat this job within your next 4 or 5 oil changes give or take. Also it comes to mind although second nature to myself, I hope you checked the block deck surface and the head for warpage deflection cracking scorching etc because it dont matter how good your head gaskets are if the components dont meet service limit its just going to be a repeat failure. Sorry I couldn't give you specific info Im not really a Toyota guy, but I hope you take my advice and save yourself some money and the headache of having to do it again.

Posted on Dec 02, 2014

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Cylinderhead torque settings


I'm not sure what engine you have in your 95 grand am SO I will give you both the 4cyl and 6cyl Specs. Also you didn't ask for the torque sequence. I will include that as well for both. 2.3 DOHC Quad 4cyl: Torque sequence---> front ' 7 3 1 5 9 ' of engine ' 8 6 2 4 10 ' Step 1: torque bolts 1 thru 6 (26 Ft/Lbs & 90 degree turn) Step 2: torque bolts 7 & 8 (15 Ft/Lbs & 90 degree turn) Step 3: torque bolts 9 & 10 (22 Ft/Lbs & 90 degree turn) Recheck final torque in sequence *** CAUTION *** This engine uses "Torque To Yield" (TTY) head bolts that means they permanently stretch during the initial installation. New head bolts must be used when cylinder head is replaced or re-installed in order to obtain proper torque. 3.1 liter V6 Torque sequence--> ' 6 2 3 7 ' ' 5 1 4 8 ' Step 1: torque bolts in sequence to 33 Ft/Lbs Step 2: turn an additional 90 degrees Recheck final torque in sequence *** CAUTION *** This particular engine uses "Torque To Yield" head bolts(TTY) (that means the bolts permanently stretch during the initial installation.) You MUST use NEW head bolts when replacing or reinstalling the cylinder head in order to obtain the proper torque.

Aug 22, 2014 | 1995 Pontiac Grand Am

1 Answer

Torque settings on a ford ranger 2004 head gasket


Torque sequence ------------ front ' 6 4 2 8 ' ' 5 1 3 7 ' ------------ Step 1: torque in sequence to 59 Ft/Lbs Step 2: loosen all bolts in sequence (1) full turn Step 3: torque in sequence to 40 Ft/Lbs Step 4: torque in sequence to 73 Ft/Lbs recheck final torque in sequence

Mar 24, 2012 | 2004 Ford Ranger

1 Answer

What is the torque settings on a 3.4 liter engine 94 camaro. replaced the heads and gaskets


Torque sequence --------- ' 6 2 3 7 ' ' 5 1 4 8 ' --------- Step 1: torque in sequence to 33 Ft/Lbs Step 2: turn an additional 90 degrees Recheck final torque in sequence *** CAUTION ***engine uses Torque To Yield head bolts (TTY) thatpermanently stretch during the initial installation.New head bolts must be used when cylinder head isreplaced or re-installed to obtain proper torque.

I hope this helps you and good luck

Mar 25, 2011 | 1994 Chevrolet Camaro

1 Answer

Torque setting for golf1 95mdl head bolts


CYLINDER HEAD TIGHTENING TORQUE [1] :
1st sequence: 40 Nm (30 ft lb)
2nd sequence: 60 Nm (43 ft lb)
Final sequence: plus 1/2 turn (180°)
torque sequence
10 4 2 6 8

7 5 1 3 9

Mar 02, 2011 | 1989 Volkswagen Golf

1 Answer

What is the head bolt torque specs on a 1990 jeep 4.0


  1. Tighten all bolts in sequence (1 through 14) to 30 N·m (22 ft. lbs.) torque.
  2. Tighten all bolts in sequence (1 through 14) to 61 N·m (45 ft. lbs.) torque.
  3. Check all bolts to verify they are set to 61 N·m (45 ft. lbs.) torque.
    1. Tighten bolts in sequence:
    2. Bolts 1 through 10 to 149 N·m (110 ft. lbs.) torque.
    • Bolt 11 to 135 N·m (100 ft. lbs.) torque.
    • Bolts 12 through 14 to 149 N·m (110 ft. lbs.) torque
  • 900c8cad.gif

    Dec 16, 2010 | 1990 Jeep Cherokee Limited

    1 Answer

    1998 FORD FESTIVA HEAD BOLT TORQUE SETTINGS & TIGHTENING SEQUENCE (1.5 LITRE ENGINE)


    1978 - 1980 FORD FESTIVA 1.6L 65-70 Foot pounds (Final torque)
    Torque sequence 9 3 1 5 7 8 6 2 4 10 Step 1: torque to 5 Ft/Lbs Step 2: torque to 20-30 Ft/Lbs Step 3: torque to 50-55 Ft/Lbs Step 4: torque to 65-70 Ft/Lbs Recheck final torque in sequence


    1988 - 1993 F0RD FESTIVA 1.3L
    Torque sequence front of engine 8 4 1 5 9 7 3 2 6 10 Step 1: torque to 35-40 Ft/Lbs Step 2: torque to 56-60 Ft/Lbs Recheck final torque in sequence

    2011 FORD FESTIVA 1.6L NO TORQUE SPECS AVAILABLE THERE IS NO FORD FESTIVA MANUFACTURED IN 1998 ALSO NO FORD FESTIVA MANUFACTURED WITH A 1.5L ENGINE
    HOPE THIS HELPS YOU

    Aug 06, 2010 | Ford Focus Cars & Trucks

    1 Answer

    Head bolt tighting sequance for a jeep 4.0


    CAUTION: During the final tightening sequence, bolt No.11 will be tightened to a lower torque than the rest of the bolts. DO NOT overtighten bolt No.11.

    • Tighten all bolts in sequence (1 through 14) to 30 Nm (22 ft. lbs.) torque.
    • Tighten all bolts in sequence (1 through 14) to 61 Nm (45 ft. lbs.) torque.
    • Check all bolts to verify they are set to 61 Nm (45 ft. lbs.) torque.
    • Tighten bolts in sequence:
    • Bolts l through 10 to 149 Nm (110 ft. lbs.) torque.
    • Bolt 11 to 13 Nm (100 ft. lbs.) torque.
    • Bolts 12 through 14 to 149 Nm (110 ft. lbs.) .
    • 21e690f.gif

    Apr 21, 2010 | 1998 Jeep Cherokee

    3 Answers

    Torque settings for cylinder head nissan sentra


    Tighten in sequence to 29ft.lbs then tighten in sequence to 58ft lbs. then loosen all bolts. Then tighten in sequence to 33ft lbs. then tighten each bolt in sequence 90 degrees then tighten each bolt again 90 degrees

    Jul 18, 2009 | 1999 Nissan Sentra

    1 Answer

    Need to know cylinder head bolt torque specs


    Head Bolt Torque For your 1994 Oldsmobile Cutlass Supreme (3.4L SFI DOHC): clearpixel.gif Foot pounds (Final torque) clearpixel.gif Note: Torque sequence --------- | 6 2 3 7 | | 5 1 4 8 | --------- Step 1: torque in sequence to 33 Ft/Lbs Step 2: turn an additional 90 degrees Recheck final torque in sequence *** CAUTION ***engine uses Torque To Yield head bolts (TTY) thatpermanently stretch during the initial installation.New head bolts must be used when cylinder head isreplaced or re-installed to obtain proper torque. clearpixel.gif clearpixel.gif clearpixel.gif Foot pounds (Final torque) clearpixel.gif Note: Torque sequence --------- | 8 4 1 5 | | 7 3 2 6 | front --------- of engine | 6 2 3 7 | | 5 1 4 8 | Step 1: torque to 40 Ft/Lbs --------- Step 2: turn an additional 90 degrees Recheck final torque in sequence *** CAUTION ***engine uses Torque To Yield head bolts (TTY) thatpermanently stretch during the initial installation.New head bolts must be used when cylinder head isreplaced or re-installed to obtain proper torque.

    Feb 07, 2009 | 1994 Oldsmobile Cutlass Supreme

    3 Answers

    Hi I'm looking for cylinder head torque settings for a 1992 BMW 316/318 e36


    BMW cylinder torque setting all models

    According to my service manual as follows.

    Cyl head to engine block (torx e12 M10 bolts)

    Stage 1 30nm (22 ft – lb)
    Stage 2 + 90 degrees
    Stage 3 + 90 degrees

    Cyl head to lower timing chain cover 10nm (89in – lb)

    The tightening sequence is from inside to outside crossover as normal. Loosening sequence is from outside to inside crossover. Remember to set torque wrench at low setting and work gradually up through the whole sequence until you get the desired torque.

    Jun 16, 2008 | 1992 BMW 3 Series

    Not finding what you are looking for?
    2000 Toyota Tundra Logo

    67 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top Toyota Experts

    yadayada
    yadayada

    Level 3 Expert

    74896 Answers

    Colin Stickland
    Colin Stickland

    Level 3 Expert

    22095 Answers

    Jeff Turcotte
    Jeff Turcotte

    Level 3 Expert

    7688 Answers

    Are you a Toyota Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides

    Loading...