Question about 1999 Dodge Durango

1 Answer

<!-- from fixya rte -->How do I remplace the neutral switch - 1999 Dodge Durango

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Master:

    An expert who has achieved Level 3.

  • Dodge Master
  • 513 Answers

If it is automatic the switch is on the drivers side of trans near the shift linkage. if it is a standard shift the switch is located on the clutch pedal

Posted on Dec 02, 2014

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

THE BACK PLSTIC COVER OF THE MOTOR ,BROQUEN,LOOKS FOR REMPLACE...


That sounds horrible, you might need to buy a new one or see about finding a good used one as a replacement.

Apr 22, 2016 | Cars & Trucks

1 Answer

Solenoides on my 01 Windstar need to be remplaced. So I did And Now the overdrive light is on all the time. What do I Do?


Go ovr ur work again..some wire or ground. Switch maybe tu. U can always take bulb out

May 22, 2015 | 2001 Ford Windstar

1 Answer

Remplace a wiper transmission on a 2005 cobalt


Be careful, because the cold really could crack that plastic cowl.... that being said, it isnt too hard of a job.

Take the wiper arms off. 13mm IIRC and ease & coerse them off. A little force may be necessary, but dont overdo it.
There are 3-4? push pin retainers and 2 screws IIRC and the antenna to remove the cowl.
From there you will get the idea. Unplug the wiper motor, unbolt the trans, and go from there.


Jan 04, 2013 | 2005 Chevrolet Cobalt

1 Answer

How to remplace the oil pressure switch?


Click here to see oil pressure switch location.

Dec 16, 2012 | 1998 Plymouth Voyager

1 Answer

Remplacement drier a/c suzuki grand vitara


you need a machine to remove the freon gas to change any part off the ac system so the gas doesn't go into the air and your lungs

Aug 15, 2012 | Cars & Trucks

1 Answer

Need location of neutral safty switch on my 1990 cadilac broughm 350 engin e


The neutral safety switch is located on the top and toward the base of the steering column almost to the floorboard.

To remove or install the neutral safety switch be sure to place the shifter in the neutral position, then dis-connect the wire connector at the neutral safety switch, then remove the securing screws and then remove the neutral safety switch.

Install the new neutral safety switch and do not over-tighten the securing screws, then remove the alignment pin and re-connect the wire connector to the neutral safety switch. (be sure not to remove the alignment pin until the neutral safety switch has been installed)

Check to be certain that the vehicle only starts in "Park" or "Neutral". Here is an image to help assist you, and let me know if you require any further assistance.


f494426.jpg

Sep 12, 2010 | Cadillac Brougham Cars & Trucks

1 Answer

1971 ford f100 pickup neutral safety switch wiring color code


Ford Neutral Safety Switch; Ford Reverse Light Switch; Backup Light Switch.

The Neutral Safety Switch wires in my 1971 Ford F100 are orange with a blue stripe.
The Reverse, or Backup Light Switch wires are black with a red stripe.

There are two sets of two wires across this combined neutral safety and backup light switch, for a total of 4 wires. Photos are at the end of this post.

The switch for the 1971 Ford F100 pickup truck is the same as in many other years and models. For details, including parts numbers, see the following quote from an expert at Ford Truck Enthusiasts:
http://www.ford-trucks.com/forums/287185-back-up-light-and-neutral-safety-switch-2.html#post5601846

The neutral switch also controls the backup lights, and is the same 1967/77.

C7TZ-7A247-A .. Neutral/Backup Switch (Motorcraft SW-600)

There is no separate backup light switch..except on 1967/68 F350's.

Neutral switch location 1967/77:

The plastic half moon shaped neutral safety switch mounts on the outside lower portion of the steering column (NOT on the transmission!).

It's activated by an inverted Y shaped lever that snaps on the shift tube

D0TZ-7B097-B .. Lever, Neutral Switch Actuator = From FTE sponsor DIRECT FORD PARTS: Ford suggested retail price: $18.72 / FTE member net: $13.23.

The switch is also still available from Ford, but the website is down so I can't post the list & net prices. .

1978 is the FIRST year the F100/350's have the neutral switch mounted on the transmission. __________________

Bill // Retired Ford Parts Manager // SoCal Chapter member // Part Number Research: 1928/2001 FoMoCo vehicles.

IMAGES
jim_pivonka.jpg
Driver side of the neutral / reverse switch showing the travel slot for the switch arm, the return tensioning spring, and the arm.

jim_pivonka_0.jpg
The front, steering wheel side of the neutral / reverse switch after removal from the steering column. The switch's two functions are actuated when the lever in the column moves the switch lever shown here to different positions as gears are selected.

jim_pivonka_1.jpg
The neutral switch is installed on the steering column near the firewall, with 5/8" bolts into the steering column (visible hole) and down column from a rectangular opening in the column housing. The actuating lever for the switch is attached to the gear shift shaft inside the housing; the lever is visibly protruding from the opening in this image.

jim_pivonka_2.jpg
Back of neutral / reverse switch, showing the wiring attachments. Black with red stripe is the backup light wiring, Orange with blue stripe is the neutral safety switch, it prevents starting in gears other than neutral & park.

Aug 03, 2010 | Ford F-100 Cars & Trucks

2 Answers

How to replace neutral saftey switch on a 1980 cadillac deville?


Use like reference guide for GM Cadillac 1967-1989 Repair Guide Neutral Safety Switch - REMOVAL & INSTALLATION

All Except 1985-89 Eldorado and Seville
See Figure 1
The neutral safety switch prevents the engine from being started in any transmission position except Neutral or Park. The switch is located on the upper side of the steering column under the instrument panel on column shift cars, and inside the shift console on floor shift models.
  1. Remove the console for access on floor shift models.
  2. Disconnect the electrical connectors.
  3. Remove the neutral switch.

To install:
  1. Place 1967-70 column shift lever models in Drive, and 1971 and later models in neutral. Locate the lever tang against the transmission selector plate on column shift models.
  2. Align the slot in the contact support with the hole in the switch. Insert a 3 / 32 in. (2.38mm) diameter pin in place. The switch is now aligned in Drive position.

1973 and later neutral safety switches have a shear-pin installed to aid in proper switch alignment so that insertion of a pin is unnecessary. Moving the shift lever from Neutral shears the pin.
  1. Place the contact support drive slot over the drive tang. Install the switch mounting screws.
  2. Remove the aligning pin. Connect the electrical wiring, and replace the console.
  3. Set the parking brake and hold your foot on the service brake pedal. Check to see that the engine will start only in Park or Neutral.
7b3f2a9.jpg

Fig. 1: Installation of a common neutral safety switch



ADJUSTMENT
See Figure 2
1974 and later cars do not have a neutral safety switch. Instead, these cars have an interlock between the lock and the transmission selector, which is non-adjustable.
  1. Place the shift lever in Neutral.
  2. Move the switch until you can insert a gauge pin, 3 / 32 in. (2.38mm) diameter, into the hole in the switch and through to the alignment hole.
  3. Loosen the switch securing screws. Remove the console first, if necessary.
  4. Tighten the screws and remove the pin.
  5. Step on the brake pedal and check to see that the engine will only start in Neutral or Park.
05843d3.jpg


Fig. 2: Adjustment of a common neutral safety switch


1985-89 Eldorado and Seville
See Figure 3

All neutral safety/back-up light switches come with a small plastic alignment pin installed. Leave this pin in place.
  1. Place the shifter assembly in the Neutral position.
  2. Remove the shifter lever-to-switch nut and the lever.
  3. Disconnect the electrical connector from the neutral safety/back-up light switch.
  4. Remove the neutral safety/back-up light switch-to-transaxle bolts and the switch from the vehicle.

To install:
  1. Position the shifter shaft in the Neutral position.

If using an old switch or the plastic pin (new switch) is broken, install a3/32in. (2.38mm) diameter pin gauge (drill bit) into the neutral safety/back-up light switch; the switch is then locked into its Neutral position.
  1. Align the flats of the shifter shaft and the neutral safety/back-up light, then, align the switch-to-tang on the transaxle. Torque the switch-to-transaxle bolts to 22 ft. lbs. (30 Nm). Remove the pin gauge.
  2. To complete installation, reverse the removal procedures. Make sure that the engine starts only in the Park and Neutral positions.
c796664.jpg

Fig. 3: Neutral start and back-up lamp switch - 1985-89 Eldorado and Seville

Hope help with this (remember rated and comment this). Good luck.

Mar 21, 2010 | 1980 Cadillac Deville

1 Answer

I remplace a new alternator and battery on a BMW x5 2001 it won'


theres an anti-theft system. take positive terminal off battery, have someone holding the key on like trying to start it, then put the terminal back on and that should start it right up (had same problem in my dodge ram) if not, check all you're connections

Aug 16, 2009 | 2001 BMW 5 Series

2 Answers

F-150 1996 4.9l... reverse lights doesn't work


the problem is most likely the reverse light switch on the transmission. is this a manyual or auto, 1st picture is switch for manual, 2nd for automatic.
bc6d5c5.jpg
084597b.jpg

Apr 15, 2009 | 1996 Ford F150 Regular Cab

Not finding what you are looking for?
1999 Dodge Durango Logo

Related Topics:

16 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts

yadayada
yadayada

Level 3 Expert

74896 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7688 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...