Question about 2005 Buick LeSabre
No. This is a part of the IPC and the vehicle configuration in the BCM would have to be changed, which, due to your VIN, will not allow for programming. The IPC is VIN burnt, as is the BCM.
Posted on Dec 02, 2014
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Turn the key to the on position (not start)
with the radio off. Wait 10 seconds. Press the "display" button on the
radio and hold for 10 to 12 seconds. the radio display will light up .
Press "display" and "1" to select functions.
This was not tested or confirmed by me, but my dad has a 2005 Impala and this is what he told me. Let me know if it works or not, and I can try to investigate it more if needed.
Posted on Jun 09, 2008
I am assuming that the DIC does not "power-up" at all.
Check your owner's manual to see which fuse powers the DIC. If the fuse is OK, you need to get your hands on a wiring diagram and remove the DIC from the dash so you can check to see if you have a good ground on the ground wire to the DIC. Then check to make sure you have battery voltage to the B+ circuit to the DIC. If the proper voltage and ground are present, you will have to take the DIC to your local dealer for repair. Many GM dealers have an exchange program where you can turn your old DIC in and get a "remanufactured" one on the spot. Others will send your DIC out for repair and call you when it is returned to them.
Posted on Oct 11, 2009
Its a resistor pack in the rear of the cluster... you can get this fixed somewhere or get a replaced one... also check youtube as there are fix it yourself videos online
Posted on Mar 15, 2010
Tips for a great answer:
Mar 15, 2016 | 2005 Chevrolet Malibu
Feb 12, 2016 | Pontiac Cars & Trucks
If the system fails to turn on or activate, the StabiliTrak®
light along with one of the following messages will be
displayed on the Driver Information Center (DIC):
TRACTION CONTROL OFF, SERVICE TRACTION
CONTROL, SERVICE STABILITRAK. If you see these
conditions, turn the vehicle off, wait 15 seconds, and then
turn it back on again to reset the system. If any of these
messages still appear on the Driver Information Center
(DIC), your vehicle should be taken in for service.
Jun 23, 2015 | 2008 Buick Enclave
Oct 09, 2011 | 1999 Pontiac Montana
Sep 13, 2011 | 2001 Buick Regal
Sep 04, 2011 | 2005 Pontiac Grand Prix
Sep 05, 2010 | 2002 Buick Rendezvous
Oct 11, 2009 | 1999 Pontiac Montana
May 08, 2009 | 2004 Buick Rendezvous
Mar 25, 2009 | 2004 Buick LeSabre
124 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: